Condition: repair required (used), Year of construction: 2005, operating hours: 52,751 h, Functionality: unexamined, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, nominal power (apparent): 12 kVA, controller manufacturer: BWO, controller model: CNC 920, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 20,000 rpm, overall weight: 16,600 kg, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, continuous operating pressure: 6 bar, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Cobjv Rlpyo Ecrzhjgt Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: AA1 - 014831, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,720 mm, controller model: Xilog Plus, overall weight: 3,600 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X/Y travel: 3,400 x 1,720 mm Work table dimensions: 3,100 x 1,200 mm Control: Xilog Plus Number of axes: 4 Tool holder: HSK F63 Tool changer: 12 positions Drilling units: 12x vertical, 2x horizontal Spindle: 7.5 kW Speed: 900 - 18,000 rpm Vacuum pump: Becker VTLF 250 Capacity: 248/300 m³/h Year of manufacture of the pump: 2006 MACHINE DETAILS Machine dimensions (LxWxH): 2,200 x 4,200 x 2,400 mm Cob Eov Rz Eqjcrzhogt Total weight: 3,600 kg EQUIPMENT - Safety mats, safety fence and various tools included

Condition: good (used), Code: 0082 Brand: RM RONCHINI - ITALY Model: 1010 - CE Standard CNC 3-axis controlled router, ideal for wood, plastics, composites, resins, aluminium, brass, stone and various - CE Standard - Year 2016 Technical data: Working area XY 1000 x 1000 mm Max stroke axis Z mm 160 Max axis XY speed up to 250 mm/sec (15 mt/min) Max axis Z speed up to 100 mm/sec (6 mt/min) Feeds XYZ with ball screws Feeds XYZ on recirculating ball screw slides and ground guideways series 20 Electrowelded steel frame thick structural tubing 6 mm Milled aluminium work table with suction slots and steel locking blocks Brushless axis XY motors with 10000-pulse encoder Brushless axis Z motors with 10000-pulse encoder and magnetic brake POWERL numerical control with integrated multifunctional PLC 3D operator interface for Windows XMC 2.0 eth RJ4 with ISO interpreter Spindle overfeed 0-100% on control panel Cgob Ecrsv Ub Dnszhjt Machining axis overfeed 0-120% on dashboard Rapid axis overfeed 0-120% on dashboard Electrospindle HF 2200 W 24000 rpm Cooling atomiser for aluminium machining Electronic handwheel for manual axis control Post processor for CAM Artcam/SprutCAM Integrated machine guards in carpentry and lexan with manual opening Overall dimensions mm 1600 x 1950 x 200 h Weight kg 800

Condition: used, Nesting work center with automatic loading and unloading Numerical Control with PC - ALPHCAM Software user interface + Alphacam Nesting software Working range in X axis mm 4200 Working range in Y axis mm 2100 Nesting work surface Automatic loading system with lateral table LH \ RH Panel detachment and loading system with 5 suction cups N° 1 vertical electrospindle 3 axes, KW 9, with automatic tool change, HSK F63 cone type Automatic tool change system with n° 6 positions Drilling head DH 17 with n° 17 vertical spindles Automatic unloading system with motorized belt Printing and application system of adhesive labels with labeler Protection and safety system with perimeter grids Safety system with front safety mats Automatic lubrication system Conditioning system for cooling and machine control cleaning No. 3 vacuum pumps 250 m3/h TECHNICAL DETAILS TO BE CHECKED Cjb Ecrewc Uwiozhogt

Condition: used, Year of construction: 2023, . *Special price - in original packaging - available immediately* CNC-CONTROLLED MACHINING CENTER Morbidelli M200 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet your specific requirements. - Easy and understandable programming thanks to the integrated CAD-CAM MAESTRO CNC software - Easy to use, the lowered machine frame means the work table is accessible at all times. The electrical cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protection is required. The supporting structure consists of a particularly strong monolithic steel base, ribbed and extremely robust. The extra-wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not require anchoring to the floor. The base provides a large, solid support for the mobile column: the work unit is equipped with a balanced, stable, and durable support that withstands the most extreme stresses, ensuring superior performance and greater precision. The moving gantry consists of a single solid unit anchored to the base and running on top quality prismatic guides fitted with ball return bearings. The working unit is fixed to it and moves along Y and Z axes, also on prismatic guides fitted with ball return bearings. The movement of the lower moving unit (X axis) and the working unit along the crosshead of the moving unit (Y axis) is achieved thanks to the power transmission by means of a rack/pinion with helical teeth. This creates a greater tooth-to-tooth thrust, resulting in greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and a quieter operation. The vertical Z-axis is driven by a ball-return screw, ensuring perfect balance with dynamic loading and rapid acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage and ensures very high-quality finishing, as vibrations are completely eliminated. Movement along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These ensure: - Reduced machining times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Elimination of setup operations when switching on the machine thanks to absolute encoders - Elimination of general maintenance operations, as there are no brushes with the brushless system. The management of axis movement and the working elements in general is simplified. Cjb Ecrowb Trpozhjgt

Condition: ready for operation (used), Year of construction: 2000, A Homag CNC 3-axis woodworking center is available. Travel X/Y/Z: 4800mm/1200mm/410mm, rapid traverse X/Y/Z: 80m/80m/30m/min, main spindle power: 12kW, tool places: 17, including 9 carriages, separate control cabinet, Gedore workshop trolley with some spare parts, Siemens vacuum pump and Gardner Denver vacuum pump. Documentation available. On-site inspection is possible. Cgeb Ecjwa A T Tjrzhjt

Condition: used, machine/vehicle number: 007644, X axis working area: 5200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 14.5 KW Number of controlled axes: 4 axes Cjb Ecovfy Rnerzhegt Maximum edge height: 90 mm Total number of drilling spindles: 27 Total number of tool changer positions: 18

Year of construction: 2010, Condition: ready for operation (used), Main Drive Spindle motor power 18000 W Number of axis 3 Movement X-Axis Movement 3050 mm Y-Axis Movement 1360 mm Z-Axis Movement 150 mm Tools Type of tool holder HSK F63 Additional Equipment Dual Form Lifting Station // Dual Pickup Station For Large Diameter Tools (Up To 270 mm) 6 Workpiece Supports (Length 1320 mm) X Axis Area Limitation With 2 Pneumatic Cylinders (Left/Right) 12 Fast-Positioning Vacuum Pods (140 x 115 x 100 mm) 8 Narrow Vacuum Cups (125 x 115 x 100 mm) 10 Stop Cylinders For Workpiece Positioning Laser Positioning System Mobile Control Panel Cgeb Ecrewct A Dozhst Vacuum Pump Three-Part Safety Mat For Pendulum Operation This 3-axis FORMAT4 Profit H22 was manufactured in 2010. A CNC Wood Machining Centre designed for versatile woodworking applications. Consider the opportunity to buy this FORMAT4 Profit H22 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: good (used), Code: 0251 Brand: MASTERWOOD Model: SPEEDY 207- CE Standard Cgob Esim R Niscrzhst Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard Boring head with 5 independent vertical chucks and 1 double horizontal chuck Saw for longitudinal cuts Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Pneumatic tool displacement mm 60 Max panel thickness mm 50 Spindles rotation rpm 4500 Saw rotation rpm 6000 Vacuum pump motor Hp 1,5 Vacuum cup diameter mm 80 Front stop complete with 4 locking cylinders for drilling narrow workpieces and strips Multitasking control complete with interactive graphic programming, 9" video, boring programs, optimizing working cycle, graphic, parametric, diagnostic modes Polycarbonate safety hood Overall dimensions - Machine : mm 2500 x 1800 x 1800 h - Weight kg 850 Overall dimensions - Electric board : mm 800 x 520 x 1200 - Weight Kg 120

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: kk000040778, feed length X-axis: 300 mm, feed length Y-axis: 900 mm, feed length Z-axis: 50 mm, startech cn v is the new NC universal drilling and blade cutting machine with fixed gantry worktable and movable workpiece, dedicated to the machining of: vertical drilling on the panel surface horizontal drilling on all four sides cutting with integrated blade in "X" direction FLEXIBLE: IDEAL FOR CUSTOM PRODUCTION Fully automatic machine with simple and intuitive Interface for fast programming. PERFORMANT: TOP PERFORMANCE Minimal setup and run times with axis speeds up to 20 m/min. Cgobjr Iz Tie Ecrzhjt COMPACT: SMALL MACHINE FOOTPRINT With its footprint of 5.5 m^2, it does not require large spaces. UNMISSABLE: AFFORDABLE FOR EVERYONE Machine accessible even to the craftsman and small woodworker with unbeatable price/performance ratio

Condition: used, Year of construction: 2022, . *Special price - original packaging - available immediately* Includes 3 days of preliminary software training in Nürtingen. Includes 6 days of commissioning/instruction plus freight costs. +++ Subject to prior sale +++ CNC-CONTROLLED MACHINING CENTER morbidelli m200 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every requirement in the field of woodworking. - Extremely powerful - with drilling spindles with 8,000 rpm and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to equip the machine according to individual requirements. - Simple and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate, the work table is accessible at all times thanks to the lowered machine frame. The electrical cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protection is required. Supporting structure: The supporting structure consists of a particularly strong, monolithic steel base, ribbed and extremely robust. The extra-wide support was specifically designed to give the machine stability and ensure consistent precision under all working conditions. The machine does not require anchoring to the floor. The base provides a large, solid support for the mobile column: the work unit is equipped with a balanced, stable, and durable support that withstands the most extreme stresses, thus ensuring superior performance and greater precision. The mobile gantry consists of a single solid piece anchored to the base and slides on prismatic guides with top-quality ball-return slides. The work unit is attached to it and moves along the Y and Z axes, also on prismatic guides with ball-return slides. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to power transmission via a rack and pinion with helical teeth; this creates a greater tooth-to-tooth thrust, resulting in greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on the mechanical components and quieter operation. The vertical Z-axis is driven by a ball-return screw, ensuring perfect balance under dynamic loading and withstanding sudden accelerations and decelerations. The main milling unit is directly coupled to the Z-axis carriage, ensuring very high-quality finishing, as vibrations are completely eliminated. Movement along the X-Y-Z axes is achieved by brushless motors powered by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high-resolution encoder- Elimination of set-up activities when switching on the machine thanks to absolute encoders- Elimination of the general Cgob Ecswb Triorzhst

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 36901, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, nominal power (apparent): 28 kVA, controller model: Biesse Works, spindle motor power: 1,500 W, number of spindles: 1, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is in good condition. 2 years ago had a general renovation. 8 panel supports 1525mm length, 24 sliding bases Cgeb Ecowfri Uorzhjt Drilling Unit, BH 22L 250m3 Vacuum pump 5-axis, 15 kW Electrospindle with HSK63 adapter, liquid cooled Works with HSK63 Safety fence and carpets Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas Pneumatic system for lifting bar supports Revolving tool changer with 10 places Automatic lubrication system Set of tools. Machine is on site, working.

Condition: excellent (used), Year of construction: 2011, Assembly line with WEEKE and LIGMATECH machines. - Built in 2011 - Available from approximately May 2025 Csbev Tmcgs Ecrzhegt - Complete assembly line for cabinet furniture consisting of WEEKE ABL220, ABL210, BHH400, ABH120, IGELPUFFER, 2x LIGMATECH MDE160, FANUC M-710 robots, and various automation systems. - Touring possible, line is still in production.

Year of construction: 2009, Condition: ready for operation (used), Main Drive Spindle speed range 6000–18000 rpm Number of axis 3 Additional Equipment Roller infeed table Upper pressure table Lower pressure table Upper and lower working units Belt outfeed conveyor (right side) Electronic thickness control Automatic central lubrication CNC control system: XP 600 with Soft CN Safety system This 3-axis BIESSE SKIPPER 100 CNC processing centre was manufactured in 2009. Ideal for versatile CNC machining, it offers robust construction and precision. Consider the opportunity to buy this BIESSE SKIPPER 100 CNC processing centre. Contact us for more information. Csb Ecrowct A Rozhegt Application Types CNC Wood Machining

Condition: good (used), Code: 0079 Brand: HIRZT - ITALY Model: LIVRA/5 - Norme CE Point to point through-feed boring machine with drilling from the bottom for furniture, kitchens, custom furniture, bathroom furniture, panels, for joinery and various - CE Standard Features: Total flexibility: Zero setting time High productivity : very short time of panel loading/unloading Graphic and parametric CN 4 NC axis: Axis X : panel movement by clamps Axis Y : boring head movement Axis Z : vertical boring head movement Axis X : micro head movement for front/back boring Aggregate circular saw Full Productivity : For serial processing the unloading system allows a high productivity - lt is possible to process sequences of big and small lots with a reduction of positioning and loading times Advantage of boring from the bottom - 1.Cleaning: Boring from the bottom gets the panel's good face protected from any dangerous contact - 2. Finish: The boring from the bottom definitely eliminates shavings from the hole reaching a high finish - The automatic multi­ speed feeding to the boring position makes the process of high performance for time required and precision NC with PC Office on a separate consolle, color display 17”, cd-rom reader, net card, USB and mouse - Graphic platform entirely developed using "object -oriented’ technology - Integrated CAD/CAM system for an easy creation of 3D parametric drawings and their translation into ISO language - Interface with other CAD systems and import/export of drawings in various formats Step by step clamps processing : The step by step panel feeding with clamps returning to the loading position, is made only with the panel blocked to avoid any error of panel positioning - Boring of very high precision with no limits of panel length Cgjb Ejv Tx D Ajcrzhet Technical data: Max panel width mm 800 4 NC axis Working speed 60 mt/1' Spindles RPM 3400 Beginning-end panel check standard Suction port diameter - n° 1 diameter 140 - n° 1 diameter 100 Air pressure 6 bar Power Kw 4,8 Overall dimensions: Machine mm 2400 x 2250 x 1450 h - Electrical cabinet mm 700 X 750 x 1700 h Weight kg 1100

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min Ceb Ecet Tw S Uerzhjgt BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Cgeb Ecrjvwbp Aezhst

Condition: excellent (used), Year of construction: 1999, Eima CNC router in good condition from factory closure Switzerland Csb Ecrzsv Rg T Hshogt

Condition: used, Year of construction: 2012, Automatic CNC machining center for efficient and precise drilling and milling of panel furniture components wooden PC 85 numerical control - woodWOP 6 software Safety cabin for the working head N. 2 clamps for blocking and moving the piece during machining Loading bench by air curtain table Minimum dimensions of the piece (X - Y - Z) mm 250 x 100 x 8 (2 x 4 mm) Maximum dimensions of the piece (X - Y - Z) mm 3000 x 1000 (optional mm 1300) x 80 (2 x 40 mm) Possibility of processing two panels simultaneously N. 2 working heads (one lower and one upper) composed as follows: * Upper vertical work head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) * Bottom vertical working head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) Evacuation of the panel (panels) by motorized belt roller conveyor Security system with perimeter grilles and frontal safety mats Cgobovz A E Te Ecrzhot

Condition: as good as new (ex-display), Year of construction: 2023, MAGGI_TECHNOLGY CENTER Maggi Sales price € 36,500,- DEMO MACHINE immediately available € 24,500,- Super Offer MAGGI-Technology GT800 easy programmable drilling machine. Perfect for the needs of the small professional, who wants to make a qualitative leap with a limited investment. For the production of custom-made kitchens and furniture. – High precision, flexibility and production capacity. Cgebetr Awge Ecrzhst – Easy to program software – Configurable machine: choose your solution! – Fully automatic – Compact 3 m² – Easy maintenance, automatic shaft lubrication, lower consumption Technical features Programmable drilling machine with simple and intuitive software, 3 controlled axes X, Y, Z, with the possibility of channel cutting, milling and angling panels (accessory) processing from under and through panel. Panel treatment with gripper and automatic shaft lubrication. Machine built according to CE regulations

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 0-250-11-2532, Homag machining center Cgeb Eormk Efecrzhet the machine is fully functional and it is possible to test the machine in operation.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Csb Ecet Txfpsrzhsgt Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. Ceb Ecretr D T Aozhjgt It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: O-201-90- 9480, Homag machining center with shaped edge banding the machine is fully functional and it is possible to test the machine in operation. Cgeb Ecrzsrmkp Rjhjt

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm Cob Eoirmyqocrzhegt A axis - Unlimited C axis +/- 180°