Used horizontal band saws - automatic - cutting range from 400mm for sale (82)

Condition: new, Year of construction: 2025, CORMAK HR500SA is an advanced automatic band saw designed for cutting solid materials, pipes and steel profiles with large cross-sections. Thanks to its two-column design and reinforced frame, the machine provides the highest stability, precision and repeatability of cutting - even in continuous operation. Technical data: automatic band saw HR500SA Cutting range Ø500 mm or 650 x 500 mm Band dimensions 6600 x 41 x 1.3 mm Band speeds 27 / 45 / 69 m/min Total power 6.5 kW Band tensioning manual Feeder stroke 500 mm Table height 715 mm Load capacity 3000 kg Dimensions (L x W x H) 3200 x 3050 x 2115 mm Weight 3200 kg Standard equipment touch control panel with settings memory, automatic work cycle, top package pressure, hydraulic material feeding system, three-speed cutting gear, cooling system and cleaning brush, bimetallic cutting band, Dsdpfxji Ab Dls Abbocr declaration of conformity CE, DTR instruction.

Condition: used, Year of construction: 2009, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 0074GFT, saw band length: 9,170 mm, saw band width: 67 mm, total height: 2,500 mm, total length: 2,500 mm, total width: 2,500 mm, feed length X-axis: 600 mm, cutting speed: 5 mm/min, cutting range round steel at 90°: 850 mm, cutting height (max.): 850 mm, Automatic band saw SOITAB mod. 850 SUP.AUT, used, overhauled, 6 months warranty Year of construction 2009 machine features: - cutting arch on square columns with linear bearings on tempered tracks - hydraulic bar feed with double speed - belt speed variator with vector inverter, - electronic cutting arch descent with endless screws - motorized blade cleaning metal brush Dcsdpsway Disfx Abbjr - blade development 9170x67x1.6 - double clamp, for reducing the end of the bar to zero - cutting capacity round diam. mm. 850 flat mm. 920 - computer for choosing the cutting length, no. of pieces, and any variation of cutting length on the same bar. - chip evacuator - automatic, hydraulic belt tension - automatic blade guide width adjustment - enhanced motor - reinforced reducer

Condition: ready for operation (used), Year of construction: 1998, total width: 2,300 mm, type of input current: three-phase, cutting range round steel at 90°: 520 mm, cutting width (max.): 520 mm, cutting height (max.): 520 mm, table length: 3,500 mm, empty load weight: 4,200 kg, Heavy, automatic band saw KASTO HBA 520 AU, designed for precise and efficient cutting of bars, pipes and steel materials. Equipped with hydraulic clamp, adjustable band speed and automatic feeding and cooling options, which makes it suitable for both single-piece work and multi-piece processing. ▪️Ideal for cuts up to 520mm in diameter. ▪️Km/h speed range: 20–130m/min. ▪️Engine 5.5kW, total ~10kW. Dcsdpfx Abowrcc Sjbor ▪️Dimensions ~2.3×3.5×2.3m, weight approx. 4t.

Condition: excellent (used), Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm Dcodpfx Aow Tulgsbbjr (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: new, Year of construction: 2024, functionality: fully functional, cutting range round steel at 90°: 650 mm, warranty duration: 12 months, empty load weight: 8,000 kg, Cutting range: Diameter : 650 mm, axh section 800x650 mm Main drive motor 7,5 kW. Belt drive unit reducer - inverter. Body of the machine tool Construction of thick-walled sheets welded and reinforced with steel sections to ensure high stability and durability of the base. In the body there are containers with oil and cooling emulsion. Receiving table at the working vise with dimensions 800x500. Arm guidance Vertical columns made of properly selected profile steel. Guiding of the arm - precision rolling guides with preload. Arm movement controlled by two ball screws mechanically connected to each other by reducers and servo motor. The machine will be equipped with a mechanism for hydraulic relief of the arm holding bolts to reduce the pressure on the ball screw nuts, resulting in longer service life. The use of the arm feed drive with ball screws provides constant control over the feed speed especially at minimum cutting speeds, setting the feed speed parameter from the control panel. The machine will be equipped with arm descent speed measurement displayed on the desktop and bend control. The belt guiding control (bend control) will be linked to the arm feed drive mechanism. When the belt deflects, the feed speed will be automatically corrected, after it returns to the correct value, the feed will automatically return to the original value. When the set value of the tape deviation is exceeded (bevel cutting), the machine will stop the cutting process and visually (indicator lamp) will notify the problem. Standard equipment Cutting arm guided on rolling guides Reducer - inverter Lifting and lowering of the cutting arm controlled by ball screws, Hydraulic clamping of working vice and feeding vice Double-half vise holding the material in front of and behind the cutting belt Bend Control Hydraulic tensioning of the cutting belt with compensation for its elongation; Feeding roller table on the body of the machine length of 1.5 mb Automatic feeder drive screw (single feeding up to 1000 mm) is only available in system with PLC and inverter Adjustment of clamping force of vices Roller receiver length 1.5 mb (receiving table) Feeding table length 3 mb with driven rollers equipped with vertical rollers on the input and output - controlled from the machine desktop (additionally equipped with a mobile desktop at the roller conveyor) Dcsdevf Icfopfx Abbsr Laser cutting line Chip extractor (directed to the right side) PLC with liquid crystal display; cutting belt speed measurement (NC) Full protection, complying with CE safety mark. Cooling system; Cutting belt; DTR

Condition: used, Year of construction: 2007, DOALL TYPE: C4100 NC Dcodew U N I Eepfx Abbor AUTOMATIC FEED YEAR: 2007

Condition: new, Year of construction: 2025, saw band length: 7,000 mm, saw band width: 54 mm, cutting speed: 100 mm/min, cutting width (max.): 750 mm, cutting height (max.): 550 mm, warranty duration: 24 months, power: 5.5 kW (7.48 HP), “STANDARD FEATURES: • HYDRAULIC VICE • VARIABLE SPEED CONTROL (INVERTER) • PLC CONTROLLED SCREEN • SAFETY SWITCHES • HYDRAULIC STRIP TENSIONING • DOUBLE VICE • SERVO MOTOR MATERIAL FEED • ADJUSTABLE HEAD DOWN SYSTEM • TIMABLE CHIP CONVEYOR • 1 SAW BLADE • 2 MATERIAL CARRYING TABLES • 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY • COUNTRY OF ORIGIN: TURKEY • MODELS PRODUCED BETWEEN 220 MM DIAMETER – 3000 MM DIAMETER TECHNICAL FEATURES : SAW BLADE DIMENSIONS 54x1.3x7000 mm SAW SPEED 20 – 100 M/MIN MAIN MOTOR 5.5 KW SERVO MOTOR 2.2 kW Djdpfx Abovyywqebjcr HYDRAULIC MOTOR 1.1 kW COOLANT PUMP 0.09 KW VOLTAGE 3X380 V FREQUENCY 50 HZ HYDRAULIC OIL CAPACITY 26 LT COOLANT WATER CAPACITY 105 LT CUTTING HEIGHT 850MM MACHINE DIMENSIONS 2092x3404x2115 mm WEIGHT 3200 KG AT THAT DEGREE 550X750 MM