Used Magnetic Clamping Table for sale (22,807)

Condition: used, Year of construction: 2023, dimensions 0,70 x 0,50 x 0,10 m weight 200 kg In our assessment, the zero-point clamping system is in good used condition. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Cgsdpfxszbvi Nj Agfju

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Cedpfxstqgnye Agfjgu Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min Csdpfsg Uf I Aox Agfogu load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Condition: used, length 700 mm width 500 mm height 105 mm Cgedpfx Asy S D Rwegfsu weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9063

Condition: used, length / mm Cgedpfx Agsy S Dzpjfsu width / mm

Condition: used, length / mm width / mm height / mm Cgjdpfx Ajy Suztjgfeu weight / kg

Condition: used, length / mm width / mm height / mm Cgsdpjy Suzmefx Agfou weight / kg

Condition: used, Technical details: Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm Cjdsu N Dr Iopfx Agfegu *

Condition: used, Technical details: weight of the machine approx.: 8kg kg dimensions L x W x H: Ø 160mmx 85 mm m Csdpju N Dw Dsfx Agfogu Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm *

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg Cgjdpfx Ageu N Dy Sefou dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm *

Condition: used, Technical details: weight of the machine approx.: 18 kg kg dimensions L x W x H: Ø 200 x H: 100 m Cgodpsu N Dmxofx Agfsu PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included) *

Condition: used, Year of construction: 1974, Technical details: Cedpfsu N D Ntsx Agfsgu voltage: 220 V clamping surface area: 630 x 210 mm current: 0,55 A weight of the machine approx.: 84 kg dimensions L x W x H: 0,63 x 0,270 x 0,10 m Magnetic clamping plate 120 watts 13x induction loops, width 20mm spacing 43mm *

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg dimensions L x W x H: 0,4 x 0,22 x 0,08 m Codpfxou Nklhe Agfogu MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) *

Condition: used, Technical details: Length: 800 mm width: 315 mm voltage: 110 V clamping surface area: 795 x 315 mm current: 1 A weight of the machine approx.: 130 kg dimensions L x W x H: 0,85 x 0,35 x 0,09 m Magnetic clamping plate Cgjdpfju N D Nasx Agfju Magnetic strips 18x, width 20mm, distance 40mm *

Year of construction: 1989, condition: used, Technical details: table length: - mm table width: - mm table load: - t Cgsdpfxou N D R Do Agfou total power requirement: - kw weight of the machine ca.: 8,0 t dimension working table: ca.4,5x3,1x1,2 m TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines *

Condition: used, Year of construction: 1989, Technical details: table length: 1600 mm table width: 920 mm height over floor: 200 mm weight of the machine ca.: 0,69 t Clamping table with 4x through holes Ø 22 mm Material cast steel T-slot according to DIN 650: T-slot spacing 250mm Csdou N Ebqspfx Agfsgu T-slot outer spacing (right and left) 120 mm a=22; h=38.5; b=40; c=18 mm T-slot length = 1380 mm *

Condition: used, Year of construction: 1973, Technical details: Length: 300 mm width: 275 mm voltage: 220 / 50 V Codju Nvrgopfx Agfegu clamping surface area: 300 x 275 mm current: 15 A weight of the machine approx.: 39 kg dimensions L x W x H: 0,47 x 0,28 x 0,09 m Magnetic plate *

Condition: good (used), Year of construction: 2010, Offer 25338 Technical data: - Length 1300 mm - Width 800 mm - Plate height 215 mm - Wall thickness 15 mm - Hole diameter of the perforations approx. 28 mm - Center distance of the perforations, each approx. 100 mm - Table height approx. 970 mm Cedpfxszaa Awj Agfsgu - Total weight approx. 400 kg

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos Cgsdpfjy Iwkcox Agfou -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm Cjdpfx Asy H Itregfjgu -Transport dimensions: 400/900/H175 mm -Weight: 288 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg Csdpfxey H Itlo Agfjgu

Condition: excellent (used), I offer a professional sine magnetic table from the renowned German company K. JUNG GmbH Göppingen. This device is designed for the precise clamping of parts during grinding, measurement, and tooling operations. Specifications: • Manufacturer: K. JUNG GmbH Göppingen • Type: Sine magnetic table (tilting) • Magnetic workpiece clamping • Adjustable tilt angle with angular scale • High precision • Robust cast iron construction • Original wooden transport case Included in the set: • Magnetic table • Original wooden case • Documentation and setting table • Clamping elements as shown in the photos • Operating keys Condition: • Used item • Magnetic surface in very good condition • Normal signs of use and storage • Complete set as shown in the photos Ideal for: • Tool grinders • Surface grinders • Tool rooms • Precision workshops • Production and maintenance Cgodoza Hl Ejpfx Agfsu The item sold is exactly the one shown in the photos.

Condition: used, table length 1200 mm table width 1200 mm table height (lateral area) 200 mm weight 504 kg dimensions of the machine ca. 1200 x 1200 mm New price approx. 4.000 euros Special price on request Cgjdey Erx Aspfx Agfsu Product description - high-quality steel S355J2 N plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The welding tables are provided with a scale as standard. Plasma-nitrided design : - Protection against rust / scratches / welding spatter adhesion - more corrosion resistant / higher load capacity Features: - 28 hole pattern / dimensions 1200 x 1200 x 200 mm - plasma-nitrided version (750) with scale - incl. 4x foot basic equipment

Condition: good (used), functionality: fully functional, Console base, head adjustable by 600 mm Drilling capacity 40 mm 2 speed ranges, stepless 60 – 1600 rpm 3 feeds 0.1 / 0.16 / 0.25 mm/rev Taper MK 4 Throat approx. 330 mm Quill stroke 220 mm Weight estimated at 1 t (Shown here as sample: 1-axis table with 250 mm cross travel, clamping surface 600 x 240 mm) Codpjy Rf T Defx Agfsgu

Condition: ready for operation (used), agnetic table, magnetic work table, used machine Cjdpfju T H Nnsx Agfegu Overall dimensions: Length: 1500 mm Width: 500 mm Height: 80 mm Weight: 420 kg Electrical specifications: 55V DC