Machine spindle grinding spindle

Fortuna 60 64 110 Ø 60 mm

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N Pgodexyllvjpfx Ad Sor We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: ready for operation (used), Slideway grinding machine SFBZ 1800x4000 Podpjuug A Eefx Ad Segr Length of grinding max, mm 4000 Width of grinding max, mm 1800 Dstance between column mm 2200 Height of grinding max, mm 1250 Table size, mm 4000 x 1800 Grinder wheel size max, mm 630 x 100 x 305 Weight of workpiece max, kg 15000 Weight of machine, kg 56.000

Condition: good (used), TECHNICAL DATA SHEET • CNC: Heidenhain TNC 430 • Table surface: 7,100 x 1,200 mm • Longitudinal travel (X-axis): 7,000 mm • Cross travel (Y-axis): 1,500 mm • Vertical travel (Z-axis): 1,500 + 500 mm • Rapid traverse (axes): 20,000 mm/min • Maximum working feed: 10,000 mm/min • Automatic head with 1° / 1° indexing: Included • DVPE 1000 rotary table with 1200 x 1200 mm surface • Spindle taper: SK-50 • Speed range: 20 – 3,500 rpm • Number of speed ranges: 2 • Main motor power: 50 kW Pgsdpfx Asxqq Rred Ssr • Automatic tool changer: Included • Tool magazine capacity: 60 positions • Internal coolant supply: Included • Chip conveyor: Included • Electronic handwheel: Included • Additional paper filter tank: Included • Operator platform: Included • Enclosure with 4 sliding doors: Included • Maximum table load: 30,000 kg • Machine weight: 45,000 kg

Condition: used, Year of construction: 2009, grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm control Siemens Sinumerik 840 D internal grinding depth max. 800 mm External grinding length max. 600 mm turning speed range - stepless 1-795 U/min workpiece length max. 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Setup speed (tapping): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through bore 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (clamped in flight) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Mounting bore grinding block (diameter): 100 mm / 125 mm - Mounting length grinding block: 220 mm - Grinding diameter: max. 600 mm - Grinding depth: max. 800 mm External and surface grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of external grinding spindles: 7.5 kW - Mounting bore of grinding block: Ø 140 mm - Grinding diameter: max. 800 mm - Grinding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/accessories: - Various grinding spindles - Various flanges/grinding wheel holders - Various clamping jaws - Coolant system - Oil mist filter - Cooler - Technical documentation Psdpfxjwp S Tne Ad Ssgr

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° Psdpfx Adeu N D Rqj Ssgr total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original Pgodpjuwv Idjfx Ad Sjr original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customer's request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -Increase of the center height to max. 225mm -Speed control for the grinding spindle Translated with (free version)

Condition: used, Year of construction: 1967, grinding length 1650 mm grinding width 700 mm Pedpfx Aett S Uaed Ssgr workpiece height 600 mm table surface area 1500 x 500 mm table speeds 0 - 20 m/min cross feed autom. 0 - 20 mm/Hub grinding spindle speed 2000 U/min grinding wheel diameter 300 mm total power requirement 19 kW weight of the machine ca. 5 t dimensions of machine L x W x H 5,92 x 3,12 x 2,65 m Accessories: 2 magnetic plates, each 750 x 600 mm; grinding wheel with flange, various grinding wheels and flanges separate, wet grinding attachment

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Pgodpfow U A Rmsx Ad Sor Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: used, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, SIP 600 – Precision Coordinate Boring Machine Accuracy Positioning accuracy on X and Y axes over the entire travel: 0.003 mm Podpfx Aoyt Rrpjd Ssgr Capacity Table travel (X axis): 1000 mm Slide travel (Y axis): 700 mm Vertical quill travel: 300 mm Vertical crossrail travel: 780 mm Distance between uprights: approx. 1100 mm Max. distance spindle nose to table: 1000 mm Table Usable table surface: 1100 × 842 mm Maximum load capacity: 1500 kg Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Slide (Carriage) Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Spindle and Hydrostatic Quill Spindle speed: 40 – 2000 rpm (18 speeds) Automatic boring feeds: 0.04 – 0.35 mm/rev Tool taper: Morse 4 – SIP 4e Spindle motor power: 5.9 kW (8 HP) Hydrostatic quill diameter: 135 mm Functions: Automatic tool clamping Automatic depth stop Spindle rotation direction reversal Speed preselection Machining Assist Unit X and Y axis display: 0.001 mm Z axis display: 0.01 mm Memory capacity: 999 sequences Automatic movements: X and Y / Simultaneous XY Programmable increments: 0.002 / 0.009 / 0.1 / 1 mm Power Supply Electrical supply: 50 Hz – 380 V 60 Hz – 440 V Compressed air: 6 – 10 bar (11 l/min) Machine Dimensions Machine footprint: 2870 × 3480 mm Footprint with cabinet: 3870 × 4000 mm Total height: 3235 mm Weight Net machine weight: 10,000 kg Machine weight with cabinet and accessories: 11,000 kg

Condition: used, Year of construction: 2019, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, position of the milling head: 2,5° x 2.5°, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,000 rpm, torque: 1,638 Nm, coolant supply: 16 bar, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: KIHEUNG Model: D-TRAX X5500 Year of manufacture: 2019 Operating Hours Control ON: 12,578 hours Program run: 6,742 hours Spindle operation: 4,869 hours Standard Equipment: • HEIDENHAIN TNC 640 CNC control with HSCI, 19" TFT monitor, DXF converter and swiveling control panel • SIEMENS main spindle motor, 28/38 kW • 2-stage, cooled ZF reduction gearbox (1–1,000 / 1,001–4,000 rpm) • X-axis drive via TWIN-DRIVE / REDEX rack-and-pinion system with two servo motors • Y- and Z-axis drives via KORTA precision ball screws • HEIDENHAIN linear scales on all three axes with DA 400 compressed-air system • INA precision linear guideways on all three axes • Hydraulic Z-axis counterbalance with nitrogen pressure cylinder • Automatic central lubrication with pressure monitoring • Telescopic guideway covers for X, Y and Z axes • HEIDENHAIN teleservice dongle for remote diagnostics Pgjdpfjzgw Dwex Ad Ssr • HEIDENHAIN HR-510 electronic handwheel • RITTAL electrical cabinet with air conditioning and interior lighting • CE-compliant full enclosure with 15 mm safety glass and four front doors • Rear chip conveyor • Coolant system up to max. 8 bar, tank capacity 800 l • Ethernet interface Paint finish: Light Grey RAL 7035, Carmine Red RAL 3002 and Slate Grey RAL 7015 Optional Accessories included: • Universal automatic milling head A4 – 2.5° x 2.5° (bi-rotating, hydraulic clamping) • Horizontal chain-type tool changer for 30 tools (servo motor with HEIDENHAIN encoder) • CTS system, 16 bar – through-spindle coolant with paper-band filter system • HAMMA Germany oil skimmer • Magnetic separator • Column extension for Z-axis travel of 2,000 mm • Preparation for pendulum machining Documentation: • Operating manual, maintenance manual, lubrication manual, electrical schematics, CE Declaration of Conformity and programming manual Inspection / Contact • Machine inspection available by appointment