X ray detection units

2 off Ishida IX-GN-4044 X-Ray machines IX-GN-4044

Condition: ready for operation (used), Year of construction: 2007, A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available June 2026. Cedpfjyxratox Adhjrh

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. Codpfjm Ux Tiex Adhsrh The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Condition: good (used), Year of construction: 2021, Electrolux Smart Variomix 300L Boiling pan 2021, Stainless, 300L cooking kettle, electrically heated, 52Kw, max temp 127'c, with spare mixing arm and box of spare parts, 3Ph Crodpjyzipqefx Adhjh

Condition: used, Year of construction: 1996, APV Compomaster Type KCC Standardisation unit for continuous standardisation of the fat content in milk and cream. Complete, Stainless Steel, 2 Pieces identical. Crsdpjfw A Unsfx Adhsh

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Crodpfxsxu Uvao Adheh Mold opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool installation height: 380 mm Opening distance: 1,300 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / option: 1/min. 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inch) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow prevention and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 51026ä

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Schubert Cedpjk Ttykjfx Adherh TLM-F2 / F44 Packaging system for bottles and folding boxes in cartons with subsequent palletising. Fully automised packing system. Pick a bottle and place in box. Place a box on pallet. Acceptance of bottles and folding boxes - Pre-grouping of bottles or folding boxes - Erecting cartons from flat blanks using hot glue - Filling the pre-grouped products into the erected boxes - Closing the filled boxes with hot glue - Weighing and labeling of the sealed boxes - Palletizing the boxes

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Mould No 1. Diameter 185 mm No 2. 90 mm. Crsdpfx Adsydplcohsh Year of construction 2013.

Condition: ready for operation (used), Year of construction: 2012, Two identical vertical flow-wrapping machines from PFM are available. 1) PFM Zenith, year of manufacture: 2012, weight: approx. 870kg, connected load: 5kW, packaging output: approx. 60/min. 2) PFM Zenith, year of manufacture: 2009, weight: approx. 980kg, connected load: 6kW, packaging capacity: approx. 60/min. Both machines were used in the food industry for packaging individual bags in a large outer bag. Documentation available. On-site inspection is possible. Crodjubbzuopfx Adhsh

Condition: ready for operation (used), Now available! Complete dumpling/knödel production line In very good condition. Production line capacity: 1,200 kg per hour For further specifications of this line, please see attachments. The line can be inspected in Stavenhagen, Germany. The installation is still fully operational and connected to power, making live demonstrations possible. The line is complete and starts with the storage of potato flakes. These are subsequently mixed in the correct ratio. The system can also process other raw materials, such as bread dough or alternative ingredients – for which an additional big bag station is available. After mixing, the product is weighed and further blended before being conveyed to the Rheon forming machines. The Rheon machines form the product; if desired, an internal filling can also be applied. The product is then transferred to the breading drum and subsequently to the spiral freezer, where the exterior is hardened to guarantee good packability. After freezing, the product is weighed by a multihead weigher and packed in doypack pouches. It then passes through the pasteurization tunnel, ensuring a longer shelf life. The packaging is subsequently dried with an air blower. Finally, a weight and metal detection check is carried out before the products are automatically packed into cartons via a repacking machine. The boxes are then automatically palletized, after which the products are ready for transport. Crsdpjx H Sapefx Adhoh Multiple photos available (please contact us for further information).

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. Credeg N Db Hepfx Adhjh • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo