CNC lathe

XYZ Machine Tools Proturn RLX425 CNC Lathe (2022)

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Dsdpfx Aoxwyuaecvjcf Spindle Motor 30Hp HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 Dcsdod Ixadepfx Acvjf No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: excellent (used), Dividing head Walter Type UPA 125 N (28487) direct and indirect dividing center height 125 mm Can be used horizontally and vertically Dsdjtrnndepfx Acvscf Spindle holder MK 4 KKG 3 Travel bag SPH 125 mm Mounting MK 2 Total transport weight 62 kg dividing head 48 kg

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, Dcodpfx Acex Elr Ajvef 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Dsdpfefy T H Isx Acvjcf 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 8038938456C, turning length: 450 mm, turning diameter over cross slide: 505 mm, turning diameter: 202 mm, spindle motor power: 10,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, Gildemeister CTX 310 Heidenhain Turn+ Djdpfx Aswk E Uzscvjcf The machine its full functional, but have some miner isue.

Year of construction: 2000, condition: defective spare-parts repository (used), Yaskawa Motoman UP130 6-axis robot with Motoman Xrc control Robot: Motoman YR-UP130-A00 Hand controller :Yasnac Mrc Year of construction: 2000 (6th month) Robot controls: Motoman Xrc ERCS UP130-RE00 Hand control: Yasnac Mrc Year of construction: 2001 - Axis: 6 - Load capacity: 130 kg - Arm extension: 2650 mm - Repeatability: 0.2 mm - Robot weight: 1300 kg - controller Xrc - cables, plugs, plugs Structure: vertically articulated type Axis types: S-axis 130 ° / s (2.27 rad / s) L-axis 130 ° / s (2.27 rad / s) U-axis 130 ° / s (2.27 rad / s) R axis 215 ° / s (3.75 rad / s) B-axis 180 ° / s (3, 14 rad / s) T-axis 300 ° / s (5.24 rad / s) Movement areas. S axis 180 ° L axis + 76 ° - 60 ° U axis + 240 ° - 130 ° R axis 360 ° Dcjdpefhkfijfx Acvof B axis 130 ° T-axis 360 ° Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Excellent condition, regularly serviced (invoices available), lots of accessories! Dsdpfsxw D S Aex Acvscf

Condition: excellent (used), The professional grading machine Marel Compact Grader, model GRA-PA32-CG60, is a reliable solution for food processing plants that need a compact yet efficient system for weighing and grading products. Manufactured in 2004 by the renowned company Marel, this grader is ideal for sorting meat, fish, poultry and other products with variable weights. Technical data: Manufacturer: Marel Model: GRA-PA32-CG60 Year of manufacture: 2004 Ref. no.: 004-0056-00020003 Power supply: 230V AC, 1 phase Nominal current consumption: 6A Maximum protection: 16A Belt type: Intralox S1100 FT PP Manufactured in Iceland Machine dimensions: Width: 300 cm Depth: 85 cm Dedpfx Acjw A I Arovscf Height: 200 cm Advantages of the Marel Compact Grader sorting machine: Compact design – ideal for small and medium-sized plants Precise weighing and sorting of products based on specified weight parameters Intuitive operation and reliable electronics Robust, industrial design for a long service life Easy integration into production lines

Condition: new, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Dcedpfot D D Nzjx Acvsf Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg