Bread roll press

WP Rotamat EN

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s Isdpovprv Rsfx Aa Ieic ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: used, Year of construction: 2006, operating hours: 14,754 h, Equipment: all wheel drive, Atlas Terex 1905 Year of construction: 2006 Iisdpfx Aaetplq Io Iec Engine power: 114 KW hammer piping, air conditioning, quick coupler

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg Iiedpfx Aaov Rgzws Ijc All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Isdju N A Eaepfx Aa Isic Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm Iisdpjd Rxw Hofx Aa Ijc carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg

Condition: new, Year of construction: 2025, TECHNICAL SPECIFICATIONS height of center 330 mm Isdpfodzzw Ujx Aa Ioic distance between centers Spindle bore 103 mm Swing over bed 660 mm Swing in the gap 840 mm Swing over Slider 420 Speed range 36 - 1600 rpm (12 steps) Spindle nose ISO 702 / II No. 8 Range of longitudinal feeds 0.063 - 2.52 mm / rev (65 steps) Range of feed rates 0.027 - 1.07 mm / rev (65 steps) Metric threads 1 - 14 mm (22 steps) Inch thread 28 - 2 speed / inch (25 steps) Module thread 0.5 - 7 mm (18 steps) Diametrical thread 56 - 4 DP (24 steps) Quill diameter 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 11 kW Weight 3.050,00 kg Dimensions 3135 x 1050 x 1450 mm

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines Iodpfohvz Iiox Aa Ioic FP1 -FP2-FP3-FP4 Single sale demand inquiries.

Condition: new, Compressive force: 30 to Piston stroke: 150 mm table width: 185 mm passage (E): 535 mm passage (F): 140 mm distance cylinder - table (F1): 40 mm distance cylinder - table (F2): 1100 mm cylinder movable (M): 200 mm width (A): 800 mm depth (B): 700 mm Height 1 (C):1770 mm height 2 (D): 1800 mm Weight: approx. 168 kg Iedpfeb Ibdljx Aa Isic Equipment: - Two adjustable speeds for piston feed by means of hydraulic pump. - Powerful workshop presses for craftsmen and repair shops - Optimal price-performance ratio due to rational design - The standard foot pedal leaves the hands free for the workpiece - Increased range of application due to the optionally available pressure mandrel set (10 pcs.). - Pressure cylinder with integrated return spring for piston retraction - Welded steel frame for heavy duty and high stability - Versatile use due to pressure cylinder that can be moved to the left and right

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Iiedpfjygicaex Aa Isc

Condition: new, pressure 120 t stroke 400 mm dayligth 900 mm 1220 mm 400 mm feed down 5,8 mm/sec feed up 9,5 mm/sec Heads 200x125 mm total power requirement 6 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1900x1000x2550 mm Iijdpoyv Ntfjfx Aa Ioc