Pillar Drilling Machine

WMW-SAALFELD BS 25 AI

Condition: ready for operation (used), A Hako compact sweeper with 2 disc brushes and central suction is available. Axle loads 1/2: 1200kg/1500kg, turning circle: 1390mm, engine: Yanmar 3TNV88C, power: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, forward/reverse speed: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions X/Y/Z: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Itjdpfx Aaswaa Hqj Eor

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] Itjdpjuhabtofx Aa Eor - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm)

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Ijdpfx Ajf Ey Ausa Estr Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function - LED lamp

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg Itjdpfxswd Ii Ue Aa Ejr

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 23 mm throat 270 mm bore stroke 110 mm taper MK 3 MK table-size 400 x 385 mm feeds mm/U Itodpfx Aaetqy Ngs Eor turning speeds 135 - 825 U/min total power requirement 0,9 KW weight of the machine ca. 0,25 t dimensions 1,2 x 0,8 x 2,0 m

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Ijdsxd Ttpopfx Aa Eotr Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: like new (used), Gillardon column drilling machine type GB 30 V, speed 60-1800 rpm, automatic feed, very good condition Itodpfxjxpxbcs Aa Esr

Condition: like new (used), functionality: fully functional, Performance in ST 60: 50 mm Speed range, stepless: 60 – 1200 rpm Motor power: 4 / 5.5 kW Short spindle: MK 5 Ijdpfxoxiyvns Aa Estr 5 drilling feeds: 0.1 - 0.14 – 0.2 – 0.28 – 0.4 mm/rev Weight approx. 1500 kg

Condition: new, Drilling capacity ----- 50 mm Itodpjga T H Isfx Aa Eer Tap capacity ----- M33 Motor ----- 3 kW Speed range ----- 55 ~ 1450 rpm Spindle stroke ----- 210 mm Spindle mounting ----- MK4 Automatic spindle feeding ----- 0.1 / 0.2 / 0.3 / 0.4 mm/rev Drilling table ----- 580 x 580 mm Foot ----- 860 x 580 mm Unloading ----- 375 mm Column diameter ----- 180 mm Maximum distance spindle - table ----- 800 mm Maximum distance spindle - foot ----- 1325 mm Weight ----- 860 KG INCLUDED * Motorized table adjustment * LED worklight * Cooling system * Digital depth stop * Tap function * 2-speed motor * CE plug * Case with various tools

Condition: new, Bernardo Gear column drilling machine GB 50 HS Drilling capacity in steel50 mmDrilling capacity in cast iron60 mmThread cutting max.M42Drill chuck1 - 13 mm / B 16Morse coneMK 4Spindle speed / number of steps40 - 2100 rpm / 12feed range0,1 / 0,2 / 0,3 / 0,4 mm/reach370 mmDistance spindle / table max.600 mmDistance spindle / base plate 1190 mmSleeve stroke 250 mmPillar diameter200 mmTable size / T-slot size 600 x 500 mm / 14 mmMotor power2,2 / 2,8 kWMachine dimensions (W x D x H) 700 x 1050 x 2350 mmWeight approx. 670 kgScope of supply - Toothed ring drill chuck 1 - 13 mm / B 16 drill chuck mandrel MK 4 / B 16 reduction sleeve MK 4 / 3, MK 4 / 2 - Motorised table stroke coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector LED machine light - Initial filling with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable protective cover Itoded Tm T Hepfx Aa Esr