Combined planing-thicknessing machine

WINTER AD-410 DELUXE

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Hfsdsvz Eqxepfx Aageg Total power requirement 2,2 kw

Condition: new, Year of construction: 2022, Dowel hole drilling device: no Drilling depth: 150 mm Hfjdpfx Aajgq Un Ajgeg oblong hole length: 180 mm Height adjustment travel: 145 mm Motor power: 1,5kW Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 240 kg

Condition: used, Year of construction: 1977, functionality: fully functional, Sharpening machines VOLLMER CANA-E 9- CANA-E 1977 €4,400 Hfsdpfxox Spydj Aagog 10- CANA-E 1977 €4,400 11- CANA-E 1970 €3,400

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Total power requirement 2,2 kw Hfsdevz E Siepfx Aageg

Condition: used, Working width 610 mm Working height 200 mm Motor output 4,4 kW Feed speed 7-14 m/min. Hedpfswy Itlsx Aagsfg weight of the machine ca. ca. 1.150 kg

Condition: used, Edge sanding machine Gartner FLK 4 - used - including mitre fence ----- Technical Data ----- Sanding belt width: 200 mm, sanding belt length: 2,350 mm, worktable dimensions: 870 x 400 mm, belt speeds: 4, extraction nozzle Ø: 80 mm, motor: 3 kW Hedpfx Aajxd U Uhegsfg

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; Hsdeu Ng Ncspfx Aagofg with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Hfedpevxh A Sefx Aageg Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: new, Year of construction: 2024, functionality: fully functional, VD 20 R Slot drilling machine with rotating table, 2.2 kW Basic equipment: 1.1 Work table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. Slot height above the table mm 160 1.5 Max. Longitudinal travel mm 345 1.6 Max. Transverse travel mm 245 1.7 Spindle stroke mm 160 1.8 Clamping diameter of the tool mm 0-20 Hfedpfxou Rnw De Aagog 1.9 Max. Tool length mm 175 1.10 Clamping eccentric piece 1 1.11 Longitudinal tilting table inclination ° 1.12 Spindle rotation ° 1.13 Rotation of the table ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 Additional equipment installed on this machine: - Suction nozzle - 2nd clamping eccentric - Mechanical dowel drilling device - 2 speed motor 1.5/1.9kW 1440/2880 rpm - Mechanical numerical dimension of the spindle height

Condition: new, Number of wheels(pcs)-4 Hsdpfx Asdmk Eksagjfg Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse