Used Welding tables for sale (584)

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid Debogvkf Do E D Nwmeut - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. Duob E Deuxfrbs Nwmjt - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table length 3000 mm table width 1500 mm Dujb Esgvkc Ts D Nwmet table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - Special set for SIEGMUND 28 clamping tables - original SIEGMUND accessories (!!) included : - 1x 28 mm mobile tool trolley - 30x quick release bolts with short twist lock - 8x universal stop 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° burnished - 16x Professional screw clamp - Nitrided - 6x Professional screw clamp 45°/90° - Nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: - eccentric, Allen key, brush, - other accessories such as: Probe CleanBasic, Probe Non-Stick and burner holder Dusbeixm T Ho E D Nwmet

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg Dujb E Dogvkkts Nwmet table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Dujb E D Njixm Nqswmet Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm Djb E Dsibw Sxo Nwmeut - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. Dob E Doixm Nfs Nwmjut - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Dsbogvkike E D Nwmjut Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90 Grad turning speeds 0,2 - 2,5 U/min bore 90,0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90,0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting Dsb E D Nweixm Nmemout - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Deb E Dogvq Hlj Nwmsut Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1069 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Deb Eeixm Tmj D Nwmout Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, table diameter 560 mm Dusb E Degvkgte Nwmst table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion Duobsixm S Ej E D Nwmjt - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW Duob Ejh Evt Uo D Nwmet The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm Dueb E D Neixm Tbowmet - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg Dusbsixm Szo E D Nwmjt SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: Dueb E Doixm S No Nwmjt - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 1500 mm table width 1000 mm table height (lateral area) 100 mm weight 255 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface Dueb Eeixm Ste D Nwmjt - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm Debjixm T Rs E D Nwmout - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 726 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment Dob E Doixm Une Nwmsut

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg Djbeixm S To E D Nwmeut SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 949 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Dujb E D Nwjt D Ht Nsmst Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 537 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm Duob Eet D Hike D Nwmjt - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm Dusb E D Nwsixm Swemet - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment