Used Welding tables for sale (584)

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes Duolq N Rfegvkf Devst - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) Dolq Nouxfrbe Rfvsut - Speed display

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. Delq N Rjgvkc Tofvsut The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length unterschiedlich mm Djlq Noixm T Ho Rfvjut table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - Special set for SIEGMUND 28 clamping tables - original SIEGMUND accessories (!!) included : - 1x 28 mm mobile tool trolley - 30x quick release bolts with short twist lock - 8x universal stop 150 L - nitrided - 4x universal stop 225 L - nitrided - 8x stop and clamping angles 175 L - cast - 2x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 750 G left - nitrided - 1x stop and clamping angle 750 G right - nitrided - 1x stop and clamping angle 500 G left - nitrided - 1x stop and clamping angle 500 G right - nitrided - 4x stop and clamping angles 300 G left - nitrided - 8x prism Ø60-135° burnished - 16x Professional screw clamp - Nitrided - 6x Professional screw clamp 45°/90° - Nitrided - 4x universal stop 300 - nitrided - 1x accessory set consisting of: - eccentric, Allen key, brush, - other accessories such as: Probe CleanBasic, Probe Non-Stick and burner holder

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table Djlqegvkkte N Rfvsut - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table diameter 340 mm Dusleixm Nqoq N Rfvet table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds Delq N Rfjibw Sxsvjut The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Duoloixm Nfeq N Rfvst Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m Dslsgvkiksq N Rfvout The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90 Grad turning speeds 0,2 - 2,5 U/min bore 90,0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90,0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting Delqjixm Nme N Rfvout - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides Duslq N Rjgvq Hlofvet 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1069 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm Djlqeixm Tmj N Rfvjut - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta Duslq N Rjgvkgtofvet - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm Djlq N Rjixm S Esfvout - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table Dujlq N Rfeh Evt Usvot - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Dslqsixm Tbj N Rfvjut Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Duelq N Reixm Szjfvot Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm Dujlqoixm S No N Rfvet - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 1500 mm table width 1000 mm table height (lateral area) 100 mm weight 255 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: Duslq N Rfjixm Stsvot - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Delq N Rfoixm T Rovsut Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 726 kg Djleixm Unsq N Rfvout The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes Duolsixm S Tjq N Rfvet - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 949 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 4-280030.XD7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs Djlq N Rfot D Ht Njvout - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 537 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm Duelqst D Hiks N Rfvjt - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Dslq N Rsixm Swsfvjut Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment