Four-sided planer with 7 heads

WEINIG

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 113253, functionality: fully functional, overall weight: 14,000 kg, table length: 4,500 mm, working width: 260 mm, working height: 150 mm, working length: 4,500 mm, The submission of a bid obligates the buyer to dismantle the machine between April 1, 2026, and April 3, 2026. TECHNICAL DETAILS Working area X-axis: 4,500 mm Working area Y-axis: 260 mm Working area Z-axis: 150 mm Table length: 4,500 mm Isdpfx Afsyh Uxysnean Number of milling spindles: 1 unit Tool changer positions: 24 units MACHINE DETAILS Power consumption: 63 A Fusing: 80 A Power output: 32.0 kW Voltage: 400 V Total height: 2,900 mm Weight: 14,000 kg EQUIPMENT Electrical diagrams (NL, DE, hardcopy) Spare parts list (NL, DE, hardcopy) User manual (NL, DE, hardcopy) Boring tool Note: The machine is sold without tools.

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm Iasdpfxjk Talpe Afnjn - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Auction of a Weinig Unimat 500! The machine will remain in operation until mid-May. Viewing can be arranged by appointment! Iajdpfx Afsyh Uw Nenen

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table Isdeyatffjpfx Afnean - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections 4 rows of metal material feed rollers 2 rows of rubber drawing rollers Iajdjthk T Iepfx Afnjn 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Iasdewqr Rvjpfx Afnen Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...

Condition: excellent (used), CATALOG NUMBER 7164 TECHNICAL DATA - Max processing width: 220 mm - Max processing height: 130 mm 4 spindles: 1) Bottom horizontal: 220 mm, approx. 5.5 kW Iaedpex Sxxvofx Afnjn 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindles 2 & 3) 7.5 kW 4) Top horizontal: 220 mm, 7.5 kW - 4th spindle adjustment: electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 driven infeed rollers, toothed - Top: 1 driven outfeed roller, rubber - Bottom: 1 driven outfeed roller, rubber - Feed on Cardan shafts - Variable feed speed adjustment - Feed motor: 1.5 kW - Lifting motor: 0.75 kW - Electric thickness adjustment - Infeed table length: 1960 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Enclosed in soundproof cabin - Dimensions (L/W/H): 3430x1500x1430 mm - Weight: approx. 1500 kg – 4-head model – German-made – Not repainted – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on EUR/PLN rate at 4.2) (Prices subject to change according to exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Number of spindles: 6 Spindle arrangement: Bottom – 4 kW Right Iodoxzbn Njpfx Afnsan Left – 5.5 kW Top – 5.5 kW Bottom – 4 kW Universal – 4 kW Feed speed adjustable via variator: 6–22 m/min Feed motor power: 3 kW Spindles with adjustment

Condition: excellent (used), Catalogue number 7784 Iodpfoyk E Rhex Afnoan TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1989, Used machine Ijdpfeykvw Eex Afnean Year of manufacture: 1989 Equipment and technical data: - Working width: 220 mm - Working height: 120 mm - Feed motor power: 3 kW - Main bottom spindle motor power: 5.5 kW - Left/right spindle motor power: 7.5 kW - Top spindle motor power: 7.5 kW - 5th bottom spindle motor power: 7.5 kW - Spindle speed: 6000 rpm - Spindle diameter: 40 mm - Minimum tool diameter: 125 mm - Maximum tool diameter on bottom spindle: 125 mm - Maximum tool diameter on right spindle: 190 mm - Maximum tool diameter on left spindle: 180 mm - Maximum tool diameter on top spindle: 200 mm - Maximum tool diameter on 5th spindle: 180 mm - Feed speed, infinitely variable: 5–22 m/min - Feed roller diameter: 140 mm - Adjustment range of jointer table and guide fence: 10 mm - Jointer table length: 2000 mm - Feed reversible drive - Push button switch for feed "forward" - Insert cutter for guide groove - Powered roller on outfeed table - Manual lubrication pump Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Ijdpfew E Hcvsx Afnsan Bottom 4 kW Right Left 5.5 kW Top 4 kW Feed speed adjustable with variator: 4–20 m/min Total power: 16 kW

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: Iodpfsxtvgkex Afnsan ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm ----- Price of The above-men...

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) Iodpfxeyi Dw Ds Afnjan 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch

Condition: good (used), Technical data: Planing width: up to 300 mm Planing height: up to 130 mm Number of heads: 6 bottom – 5.5 kW right – 5.5 kW Iedpfxew Sh Dmj Afnsan left – 5.5 kW top – 5.5 kW universal 360° – 5.5 kW bottom – 7.5 kW Feed motor: 2.2 kW, stepless adjustment via inverter 4 feed rollers in the table

Condition: excellent (used), Number of boring spindles 6 St. Working width 220 mm Working height 120 mm Length of the planing table 2.000 mm Feed motor 5,5 kW Feed speed 36 m/min. Iasdpfx Afsyiu R Isnsn Grooved table Ja Ja