Wood shredder

Weima WL 4

Condition: excellent (used), Weima WL4 wood chipper 18.5 kW engine 600 mm rotor length 28 knives on the rotor, V-rotor Hydraulic infeed hopper Credoz Ip Dcopfx Adhjh Automatic reversing function 20 mm screen Machine with very low operating hours. Used machine, its condition is only slightly different from a new machine. Weight approximately 1300 kg.

Condition: refurbished (used), functionality: fully functional, overall weight: 1,300 kg, WEIMA WL 4 shredder, 18.5 kW Machine for shredding production waste from wood processing, furniture manufacturing, pallets, CLT, particleboard, rubber, and plastics. Mounted on vibration-damping legs. The machine is in fully working condition and has undergone the following repairs: 1. Bearing replacement on the shaft. 2. Complete gearbox service with replacement of 3 sets of bearings. 3. Replacement of the sliding rails of the drawer. 4. New rotor knives. New stationary knives. Codpfxoz En Nre Adhorh 5. Replacement of the hydraulic pump. 6. New gearbox and hydraulic oils. 7. New hydraulic hoses. 8. New oil filter. 9. Sandblasting and powder coating of the entire machine. Technical specifications: POWER: 18.5 kW NUMBER OF SHAFTS: 1 SHAFT LENGTH (mm): 600 mm SHAFT DIAMETER (mm): 252 mm ROTATION SPEED: 90 rpm NUMBER OF KNIVES: 14/28 SCREEN SIZE: 15 mm MACHINE DIMENSIONS: 200 x 160 x 120 cm MATERIAL: wood waste FEED OPENING DIMENSIONS (mm): 600 x 800 mm WEIGHT (kg): 1300 kg

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Cedpfxez A H Sao Adhorh Storage location: Supplier

Condition: good (used), Shredding machine Rotor approx. 250 mm Hydraulic slide Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Functionality tested Cedpfx Ajz Ea Tpodherh Technical data available upon request.

Condition: repair required (used), Year of construction: 1995, functionality: not functional, machine/vehicle number: 950/2507, fuel type: electric, Shredder, requires repair, possibly with a defective shaft. The device must be picked up. Crjdpfx Adez Dt Uwshsh

Condition: good (used), Year of construction: 2010, Engine size : 18,5 Kw Opening : 600 x 1000 mm Number of knives : 28 trapez knives Rotor diameter : Ø 250 mm Crsdpfx Asz Dn Ufedhsh Rotor length : 600 mm Rotor rpm : 90/min Siewe holes : Ø 15 mm Dust extraction nozzle : Ø 160 mm Can be examined in working condition, ask for WHATSAPP demo. Mounted with new knives + counter knive Weight : 1300 Kg

Condition: excellent (used), 18.5 kW 1500 kg Crodpfx Adjz Ak Dpehjh In very good condition.

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Year of manufacture: 2003 Operating hours: approx. 1,244 h Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Cedpez Ai N Refx Adherh Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 Crjdsw H Rn Eopfx Adhjh TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Crsdpfxjbtnfte Adhjh Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.