Shredder

Weima HWN-2-1000

Condition: new, Year of construction: 2026, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Gedjhw Ng Iepfx Afnoin Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device Program creating lists on PC in XML

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Camam, Comec, OMEF, Brusa di Garboli Gijdpfxsqnufvs Afnon

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Gisdpfsuzht Tox Afnen Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Year of construction: 2013, condition: good (used), functionality: fully functional, For coating / lamination of curved and contoured workpieces Press frame internal dimensions: 2,880 x 1,280 mm Vacuum pump: 25 m³ Godpfx Afox Dayijnjin with vacuum buffer tank Movable on castors Tilting press table Vacuum pump motor: 0.75 kW Vacuum regulator with digital display

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Gjdjxr Tp Hspfx Afnjin

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm Gedpfxot R T Hce Afnjin 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg Godpfeignt Uox Afnsin ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1991, VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been 2025 year completely overhauled and technically upgraded and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to start pozition. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Introduction: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Gsdpfot Dh T Dox Afnjin Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance.

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Giodpfofhb Tksx Afnsn

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Gsdpfxoxl Rqbs Afnsin Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level