Paint shop

Ventherm Lackierkabine

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 960 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 1,260 mm, fuel type: diesel, mast type: triplex, construction height: 2,000 mm, power: 44 kW (59.82 HP), fork length: 1,200 mm, empty load weight: 3,600 kg, total length: 2,260 mm, drive type: Diesel, construction width: 1,540 mm, Rough terrain forklift Load center: 500 Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: Very good Front tires type: Pneumatic Lsdpfew N Tppox Amnerl Front tires size: 15.5/55 R 18 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires condition: 60 - 80% Sideshift, 3rd valve, 4th valve, half-cab,

Condition: good (used), Year of construction: 2022, Stow Frames: 9000x1100x100 - 600 pcs - 95 EUR 9500x1100x100 - 200 pcs - 100 EUR 10000x1100x100 - 90 pcs - 105 EUR Lredpfoqzhncex Amnel Beams: 2700x130 mm (3000 kg load capacity) - 8744 pcs - 11 EUR 3600x160 mm (4000 kg load capacity) - 378 pcs - 14 EUR Leg protections - 890 pcs - 6 EUR/pc

Condition: used, Year of construction: 2008, machine/vehicle number: MBxx-25, DEMAG KBK 2 - crane sky crane runway indoor crane Please ask your crane runway about your dimensions. Payload / lifting capacity from 80 125 250 500 to 1000 Kg Technical data of the system: Profile Demag KBK 1, 2L, 2 rails Also available as a monorail with curved sections, turntables and points! Mounting height variable The system can be delivered complete, including accessories such as: Lrsdpfxowq A Ave Amnsl KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. All sizes of chain hoists are optionally available Various facilities available. Very good used condition Rails available in yellow or red! Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items!

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Ledpfx Ajvvizkjmnerl Storage location: Garbsen

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type : SHUTTLE-XP-500-3050x864 Control : C2000, with B/W OP2000 display Serial No. : 07006421/001 Year of construction: 2007 Total Load: 2x33,500 kg Load per tray: 460 kg (proportionally distributed) Tray dimensions: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid provided system is unsold Technical details each Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Wide x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system appx: 14.19 m2 - Capacity with 32 trays: appx. 84 m2, every tray is appx. 2.64 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W Ledpfx Amswnankenorl - LED anti-dazzle lighting above access point - Use of toothed belt for minimum noise - Use of toothed-belt for fastest order picking - Distances can be realized in steps of 25mm by arranging the support profile. a prerequisite for high compression storage - Automatic full tray extraction table Price: On request only by e-mail Price: excl. VAT, including transport and assembly Delivery time: from stock Machinehandel De Leeuw BV specializes in used machines and accessories for the machining industry and used paternoster systems from Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue Lsdpfxev Erkaj Amnorl T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: Ljdoia Taxspfx Amnsrl - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,596 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,647 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, fork carriage width: 1,260 mm, empty load weight: 4,530 kg, drive type: Diesel, construction width: 1,320 mm, Off-road forklift Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tyres type: pneumatic Front tyres size: 275/70 r22.5 Front tyres condition: 60 - 80% Rear tyres type: pneumatic Rear tyres size: 7.00-12 Ledpfxovgh Iks Amnerl Rear tyres condition: 60 - 80% Side shift, 3rd valve, front work lights, heating, soot filter, full cabin, full free lift, CE certificate,

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating Lrodpsgf Sw Nsfx Amnsl

Condition: new, Year of construction: 2026, Grinding machine for continuous operation in production, tool shops and renovation departments. The machine has a modern, sturdy design. Its headstock operates on two pairs of guides. Hydraulic feeds for 2 axes, by default comes with a digital display. Description Double V-shaped guide Hydraulic feed in 2 axes Tempered and precisely ground linear feeding guides Central lubrication of guides Digital display Sturdy design High machining accuracy Technical data TABLE DIMENSIONS 500 x 250 mm CROSS / LONGITUDINAL FEED 260 x 560 mm MAX. GRINDING SURFACE 540 x 240 mm MAX. DISTANCE FROM TABLE TO SPINDLE CENTERLINE 490 mm TABLE RUNNERS DOUBLE GUIDE CROSSWEEP PER 1 DIVISION OF NONIA SCALE 0.02 mm CROSSMOUNT PER 1 TURN OF THE WHEEL 2.5mm VERTICAL SHIFT PER 1 DIVISION OF NONIA SCALE 0.01 mm MANUAL VERTICAL FEED VOLUME PER ROTATION 1.25mm WHEEL DIMENSIONS 200 x 20 x 32 mm WHEEL ROTATION 2850 rpm MAIN MOTOR POWER 1.5 kW OIL TANK CAPACITY 80 L HYDRAULIC PUMP MOTOR POWER 1.5 kW ENGINE POWER FOR COOLANT PUMP 40 W DIMENSIONS 1800 x 1400 x 1800 mm WEIGHT 900 kg Optional equipment, dependent on the model (inquire with the sales rep) Magnetic table Chips separator with a magnetic filter Grinding wheel Grinding wheel fixture Cooling system Halogen lighting Lrsdpokkcm Usfx Amnjl User manual EC declaration of conformity The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.