SCREDDER FOR PLASTICS

VEM

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 11 kW (14.96 HP), Fully functional electric motor. Gedozk Utkepfx Ahnsud Previously installed in a surface grinding machine. The shaft runs true (see photo).

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Gujdeyrhi Nopfx Ahnsd Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: used, machine/vehicle number: IDC000242, total length: 4,000 mm, total width: 1,000 mm, power: 4 kW (5.44 HP), Vibro conveyor with screen Lenght: 4 m Width: 1 m Electric motor: 4 kW Guodpjzi Rubjfx Ahnsd Screen eye: 3×5 cm

Condition: good (used), electric motor, three-phase motor Gjdpfx Ajdzyl Hohnoud -Power: 1.1 kW -Speed: 1415 rpm -Shaft: Ø 22 x 50 mm -Design: B3 -Protection class: IP 44 -Dimensions: 300/157/H200 mm -Weight: 17 kg

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Guodpfx Aowxmb Ejhnod Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: used, Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1415 rpm -Shaft: Ø 22 x 47 mm -Construction: B5 -Protection class: IP 44 Gujdpfxsdzzg Ee Ahned -Dimensions: 347/198/H220 mm -Weight: 27.3 kg

Condition: used, Gear motor, electric motor -Speed: 40/80 rpm -Power: 0.7/0.91 kW -Construction: B5 Gedpfx Ahjd Al Hwonjud -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 685/240/H320 mm -Weight: 60 kg

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Guedpfx Aheucfwponod

Condition: good (used), geared motor, electric motor -Speed: 40/80 rpm -Power: 0.6/1.0 kW -Design: B5 Guedpfjd Al Hxox Ahnod -Shaft diameter: Ø 48 mm -Protection class: IP 44 -Price: per piece -Quantity: 1 available -Dimensions: 655/250/H320 mm -Weight: 53.5 kg

Condition: good (used), Electric motor, three-phase motor Gjdpfx Aev Iy Ewshnsud -Manufacturer: VEM, electric motor type KMR 71 G 2 Ex-protected -Power: 0.8 kW -Speed: 2850 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 44 -Dimensions: 250/140/H185 mm -Weight: 11.4 kg

Condition: used, Year of construction: 2014, operating hours: 18,700 h, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 200 kW (271.92 HP), rotational speed (max.): 87 rpm, input voltage: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Applications: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal recovery or material recycling, whether loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (ABB frequency inverter) Recooling unit: Yes, included Feed opening: 1790 x 1750 mm Filling volume: approx. 4 m³ Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz : 87 rpm Guodpow Tk Udsfx Ahned Number of rotor knives: 41 pcs Knife dimensions, pointed knives: 87x87x38 mm Counter knives, lower: 5 pcs Scraper comb, upper: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: used, Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KR 112, 2/6./S -Power: 2.2kW -Speed: 940 rpm Gjdpfeibd S Hsx Ahnjud -Shaft: Ø 28 x 60 mm -Protection class: IP44 -Dimensions: 390/230/H255 mm -Weight: 41 kg

Condition: used, Three-phase motor, electric motor Gedpfxjd R Dtts Ahnsud -Power: 11 kW -Speed: 1440 rpm -Voltage: 380/660 V -Shaft: Ø 38/80 mm -Construction: B5 -Protection class: IP44 -Price: per piece -Number: 4 pieces -Dimensions: 520/286/H330 mm -Weight: 86 kg

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Guedpfxsv Amw No Ahnjd Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: used, Three-phase motor, electric motor Gusdpjct Aamjfx Ahnjd -Power: 7.5 kW -Speed: 1480 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: - -Dimensions: 470/285/H350 mm -Weight: 69 kg