Centre lathe VDF BOEHRINGER - DUE 800

VDF Boehringer DUE 800

Condition: used, Year of construction: 1982, greates pass round over bed 820 mm turning length 3000 mm turning speeds 7,1 - 1.400 U/min workpiece weight max. 2.000 kg Longitudinal Feed 0,063 - mm Planar Feed 0,05 - 28 mm Fgedezupn Dopfx Amteg Travel Distance Plan Slider 520 mm Travel distance of the tailstock quill 280 mm center height over square guideway 400 mm bed width 0 mm faceplate diameter 800 mm total power requirement 30 kW Main Spindle: - Spindle head (DIN 55022): 11 - Camlock spindle head: 11 - Spindle bore diameter: 128 mm - Spindle diameter at the front bearing: 170 mm Lead screw: - Pitch: 12 mm - Diameter: 54 mm Circumferential diameter over the long cross slide: 515 mm Circumferential diameter in the bed recess: 890 mm Length of the bed recess in front of the main spindle: 269 mm Maximum workpiece weight with one support block: 2,500 kg Maximum workpiece weight with two support blocks: 3,150 kg Diameter of three- and four-jaw chucks: 315–500 m

Condition: used, Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 5,000 rpm, SPINDLE TAPER ISO 50 X LONG. TRAVEL MM.6000 Z SADDLE TRAVEL MM.1250 Fgodpswz H Rfefx Amtsg Y VERTICAL TRAVEL MM.2000 SPINDLE SPEED RPM.5000 FEEDS MM/MIN.8000 SPINDLE MOTOR POWER KW. 37 CNC HEIDENHAIN iTNC 530 REMOTE HAND WEEL FLOOR PLATES 7000x2000- 15 TON/MQ. TABLE 1080 X 7220 X H 820 MM ATC.40 CHIP CONVEYOR ROTATING HEAD IN CONTINUOUS TUPC 0,001°x0,001° COOLANT THROUGH THE SPINDLE 20bar FUNCTION RTCP FPT AUTOCAL EXTERNAL COOLANT TANK HEIGH & LOW PRESSURE WITH PAPER FILTER N.2 AUTOMATIC HORIZONTAL DIVIDERS WITH 2 SUPPORT TABLES N.1 PIECE PROBE

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Fgsdpfx Amjy E S D Esteg

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Fsdpfjytyf Sox Amtegg Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Fodox Sx Htjpfx Amtjgg Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm Fedpfeu Rni Hex Amtsgg distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: good (used), Manufacturer: MBT Type: MV-250 S Motor: 5.5 kW Hopper size: 780 x 600 mm Fjdehzr U Iopfx Amtegg Housing size: 3500 x 1000 x 2200 mm

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Fgodpfxegbfaxo Amteg Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Fgsdpsyu R Nkofx Amtjg Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Fgodpsx Tgr Tsfx Amtog Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!