Center lathe

VDF Boehringer DUE 800 3000x800

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp Bsdpfezi Dhbox Aa Ijln - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 1976, functionality: unexamined, total length: 4,100 mm, total width: 1,900 mm, total height: 1,900 mm, bed width: 550 mm, rotational speed (max.): 1,800 rpm, For sale is a Boehringer DM550 centre lathe with leadscrew/feed shaft from 1976 (18.5 kW). The DM 550 features a swing diameter of approx. 550 mm (over bed) and offers high rigidity for heavy-duty and precise turning operations. The machine is in age-appropriate condition, has not been tested, and is being sold as-is. Our Service Promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you anytime, even after purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! Bsdpfoxyxu Dex Aa Ijln PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Bledpfjzi Ra Rsx Aa Ien Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: EC1606, grinding length: 1,200 mm, grinding width: 500 mm, grinding wheel diameter: 400 mm, distance table to spindle center: 700 mm, grinding wheel width: 50 mm, overall weight: 6,100 kg, grinding spindle speed: 1,500 rpm, space requirement height: 2,600 mm, space requirement length: 4,600 mm, space requirement width: 2,200 mm, Like-new, lightly used surface grinder. Bodey Rxuhopfx Aa Ieln In very good condition. Includes digital display on the Y-axis (SINO SDS6).

Condition: used, Technical details: turning diameter over bed: 830 mm turning dia. over face-slide: 540 mm turning length: 3000 mm turning diameter over support: 540 mm centre distance: 3000 mm faceplate diameter: 800 mm Rapid feed X axis: 4 m/min. control: MTC K (Monforts) range of revolution per miute: 2 -1.600 U/min spindle passage: 88 mm tailstock taper ISO: MK6 tailstock quill stroke: 200 mm max. workpiece weight between centers: 1250 kg max. workpiece weight -without tailstock: 3000 kg turning dia. in gap: 1.200 mm length of gap: 310 mm Weight approx.: ca. 6.85 (ohne Späneförderer und Kühlmittelbehälter) t dimension machine xH: 2,55 x 1,1 x 1,29 m Cycle lathe Blodpfx Aaewmlknj Ion Machine overhauled in 2010 Operation via control panel Thread cutting by calculation Interpolator of NC control Chip conveyor manufacturer Cable drag Three-jaw chuck D=500mm without clamping jaws Various accessories *

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 104 mm, turning diameter: 870 mm, turning diameter over bed slide: 1,150 mm, Geminis GE 870 S lathe, with a 4000mm center distance, featuring a complete cast iron bed, dimension display, 870mm swing over the bed, automatic feed on the carriage, rapid traverse on the slides, a quick-change tool turret, 580mm swing over the cross slide, 1100mm swing over the tailstock, 340mm tailstock length, and speeds ranging from 16-1250 rpm. The spindle bore diameter is 104mm. It is equipped with a 3-jaw chuck with a 400mm diameter and a quick-centering mechanism, as well as a 4-jaw independent chuck with an 800mm diameter. It also includes 2 fixed steady rests and an additional universal 3-jaw chuck with a 315mm diameter. The main motor has a power rating of 18.5 kW. Overall, the lathe is in very good condition. Bljdpfx Aaozmp Hko Ion

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Bljdpfxjyyniae Aa Ion

Condition: excellent (used), Year of construction: 1979, turning diameter over bed 480 mm turning diameter over slide rest 295 mm Blodpsyiu T Ajfx Aa Isn turning length 1000 mm spindle bore 56 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,4 x 0,8 x 1,6 m

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Bedpfxexmd Uvs Aa Ijln Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000 Blsdpfx Ajy Ty Ihsa Ien