Suction collector Suction bell -used-

UNBEKANNT

Condition: used, Technical details: weight: 400 kg 8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mm was used for clamping rings on a Vertical Turning Machine Fodpfx Afsyim D Renefu *

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Ffsdpfxoftdv Ue Afnju Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: good (used), Fixators, leveling units, leveling elements, machine feet, leveling shoes, leveling feet, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements, silent blocks, vibration dampers -Spring elements: Machine feet, leveling feet, aluminum/rubber for machine tools and systems -Spring element: Ø 125 mm -Total height: 63 mm Ffjdpfx Asyimy Refnju -Thread: M16 -Number: 16 spring elements available -Price: per piece -Dimensions: Ø 125 x 63 mm -Weight 1.0 kg/piece

Condition: used, Technical details: Ffjdoyimykepfx Afnju length: 500 mm width: 320 mm height: 800 mm weight of the machine ca.: 0,25 t Angular clamping device made by cast iron with 5 T-slotss 22 mm *

Year of construction: 2026, condition: new, Magnetic separator for spool transport line Pipe magnet with 4 magnetic plates ( permanent magnet ) Hinged door for easy removal of the metal parts Tube diameter: 180 mm Fodpfx Afecqvhxonjfu Available immediately Location: From stock 54634 Bitburg

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: Machine foot for machine tools and systems Fodpfxoyil Ris Afnofu -Support surface: 190 x 190 mm -Installation height: 23 mm -Quantity: 1 piece available -Dimensions: 190/190/H23 mm -Weight 4.5 kg

Condition: good (used), Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: 2 pieces, for machine tools and systems -Spring element: Ø 160 mm -Mounting hole: M16 -Price/Fee: complete Fedpfev Rmkfjx Afnefu -Dimensions: Ø 160 x 38 mm -Weight: 2.3 kg/piece

Year of construction: 2025, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Ffsdpsfyadbjfx Afnsu Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice Fjdpjxrz Auofx Afnefu -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Condition: good (used), Height gauge, parallel gauge, height measuring device -Altitude gauge: Altimeter -Max. working height: 1000 mm -Dimensions: 280/160/H1100 mm Fodjx Exxcjpfx Afnofu -Weight: 7 kg

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout TECHNICAL DATA LOAD 1.5 BASIC Fodpfx Afsdqzhbenefu Intake 140 / 160 mm Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: used, length 1500 mm width 700 mm height 840 mm Fsdpfx Afjyif U Usnsfu 3 St.

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 90 mm -Transport width: 600 mm -Number: 5x transport rollers available -Price per piece Ffodpfxet H Trqe Afnou -Dimensions: Ø 90 x 620 mm -Weight: 6.3 kg/pc.

Condition: used, external dimensions: Fodeb N Nd Uepfx Afnofu Width/Height: 65 mm Length: 2600 mm Weight: 70 kg

Condition: good (used), Long-link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link sprocket, conveyor sprocket -Drive wheel: Conveyor chain wheel with 11 teeth -Division: 100 mm -Disc width: 23 mm -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm -Quantity: 2x sprockets available -Price: per piece -Dimensions: Ø 380 x 90 mm Ffsdpfx Afswztu Ronju -Weight: 22.3 kg/piece