Hydraulic power chucks

unbekannt Durchmesser 160 mm

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Rezess: Ø 130 mm -Hole circle: 3 x 144 mm -Throughout: Ø 41 mm -Weight: 6 kg Kljdpfx Ajdub A Tjalsp

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis Klodpfjwi Ibusx Aaljp *

Condition: good (used), Bezel, steady rest, lynette -max. passage: Ø 250 mm Kljdpjdpaq Refx Aalop -Centre height: 220 mm -Edition: Cast -Dimensions: 462/150/H505 mm -Weight: 39 kg

Condition: good (used), Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Mouth size: Ø 160 mm -without: interchangeable jaws -Central bore: mm Klsdpfx Aodpyzxsalsp -Dimensions: 320/230/H220 mm -Weight: 30 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 389 mm, turning length: 485 mm, turning diameter: 678 mm, spindle bore: 86 mm, spindle speed (max.): 3,500 rpm, feed length X-axis: 236 mm, feed length Z-axis: 495 mm, chuck outer diameter: 254 mm, controller model: Mori Seiki MSG-501, Twin Spindle Lathe with Mori Seiki MSG-501 Control, Live Tooling. 12 Station ATC, 3 Jaw Chuck 250mm, CHip Conveyor, 170mm 3 Jaw Chuck Klodpfx Asyguzzoalsp

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 160 mm -Tip height: mm Kjdpfx Aaoddfhvolslp -Edition: gunmetal -technical drawing with the photos -Dimensions: 500/85/H740 mm -Weight: 38 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Kjdpjd Irbasfx Aalolp -Mouth size: Ø 160 mm -Passage: Ø 41mm -Weight: 8.7 kg

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Klodpfeu Uic Tox Aaljp Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 160 mm -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg Kjdpfx Aodykbtsalelp

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Throughout: Ø 46 mm Klsdpodz U Svsfx Aalep -Weight: 9 kg

Year of construction: 1999, condition: used, ja VDI 20 number 3 Stück im Paket Kodpfx Aashr Sv Tslelp +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Bezel, setting stick, lynette -Max. passage: Ø 160 mm -Peak height: 220 mm -Edition: Gray cast iron Klodpfx Aajcill Rjlsp -technical drawing included with the photos -Dimensions: 450/100/H500 mm -Weight: 33 kg

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg Kedpfob A Rkdsx Aalslp

Condition: ready for operation (used), CNC milling center YANG EAGLE 1000 with 20-fold tool changer x / y / z 900 x 500 x 500 mm Fanuc Series O-MD Type: SMV-1000 Klodpfehlp Nuex Aaljp Model: C & H-3A UNIT FAN: 100 VA Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.