Retrofit digital display f. JUNG HF 50

JUNG HF50 Nachrüstung Digitalanzeige

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm Gedpfx Aaew Intasxsbl --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 Gbjdpswzh A Asfx Aaxjl 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Gbjdpfx Asvn Svuoaxol Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Electrical height adjustment of the cabin for body-friendly posture. Memory position storage for 3 heights. Dust extraction filter 2000m³/h 2,2kW. Gbsdpfjga Ehbex Aaxjl

Condition: new, Year of construction: 2026, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor. Machine description Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials. KDP450TOP technical parameters CAPACITY 450L (0.45m3) AIR CONSUMPTION 400 - 1000 l/min OPERATING PRESSURE 4 - 8 BAR AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580 x 270mm DRAIN CONNECTION fi 64mm and 90mm Godjm Nccxepfx Aaxsbl CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 1140 x 650 x 630mm DIMENSIONS 1260 x 1000 x 1600mm WEIGHT 105 kg Standard equipment DC15 cyclone exhaust Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with four replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Manual in English We kindly inform you that the device requires self-assembly. We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Gjdpfx Aaecirniexobl Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg Gjdob Ez R Uepfx Aaxebl

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 Gbjdpfx Aev Nztxjaxol THIS DEVICE HAS NEVER BEEN USED.

Condition: used, Down table size: 1120x1250mm Technical characteristics: *UP DOWN STROKE 1000 mms Godpfxs Dv Nxs Aaxebl *FORWARD BACKWARD STROKE 1200 mms *LEFT RIGHT STROKE 1000 mms

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Lenght of workpiece 50 - 1000 mm Grinding wheel speeds 13'000 - 45'000 rpm Misc.accessories MARCELS MASCHINEN AG Gbodorivlujpfx Aaxol