Bar automatic lathe

TORNOS Deco 10

Condition: good (used), machine/vehicle number: T61599, TORNOS DECO 10, serial number T61599, 9-axis, equipped with a TORNOS ROBOBAR automatic bar feeder, additional tray, lathe cleaned and in working order. Laedszk Ug Dspfx Apmod

Condition: good (used), Year of construction: 2000, x-travel 3500 mm y-travel 1600 mm z-travel 1200 mm spindle turning speed range 250 - 3000 U/min tool taper ISO SK-50 Laodpoykvaysfx Apmjd tool change unit 40 rapid traverse: 15000 mm/min. feed 5000 mm/min table dimension - longitudinal 3860 mm table dimension - cross 1000 mm control HEIDENHAIN TNCi530 weight of the machine ca. 24 t dimensions of the machine ca. 8000 x 5000 x 4000 m

Condition: good (used), Year of construction: 1998, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1700 x 1010 mm Laedjzhxk Iepfx Apmed CNC turning machine Completely overhauled, both electrically and mechanically: Loading magazine: LNS Tryton 112 MAIN SPINDLE - Max. bar diameter: 10 [mm] - Travel: 66 [mm] - Spindle speed: 16,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] COUNTER SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2003, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1 x 2 m CNC turning machine Lsdpfx Aozhxkzepmjad Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder Ledpshubg Tsfx Apmsad - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: good (used), Year of construction: 2000, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,0 x 2 m CNC turning machine Completely overhauled, both electrically and mechanically: 10/2018 Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg Ledpszhxkuefx Apmead

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank Ljdpoy Aprnofx Apmoad - Bar loader : LNS TRYTON

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 54.035 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 Lodpfxsuhhp Sj Apmoad - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : IEMCA GENIUS 118 / 32LL - Cooling unit : MARKSA CSW 200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 3

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 Laodpfxsy Aprho Apmed - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] Lsdpfx Apsy Aprbemjad - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Lajdpoxq E Dajfx Apmed

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 X 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] MACHINE HOURS - Number of hours under power : 89897 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher Lajdpfx Apsuhbakjmjd - Ejection of workpiece - Coolant tank - Number of turning tool holders : 4 - Number of fixed tool holders : 6 - Number of turning tool holders : 7

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] Lasdpfx Aouhbadspmjd - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 X 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Fixed guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Number of turning tool holders : 4 - Number of fixed tool holders : 5 - Number of turning tool holders : 6

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery Lasdpfewf Aclox Apmed No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018), all overhauled by B&LOverhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • Directional spindle stop S1 Additional Equipment available (Pictures 17-21): • Equipment to be equipped with Robobar SSF 3 m loading magazine • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 2 different hybrid drums Technical Specification Counter Spindle Yes Laedpfjx D D Ikjx Apmod