Panel saw

Striebig PFA

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Ksdpfx Agox Eilqs Ujll Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers Ksdpswka S Iefx Ag Uoll - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Storage location: Nattheim Klodjvvkq Topfx Ag Uol

Condition: ready for operation (used), Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right Kljdpfjxacd Nsx Ag Ujl * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: used, Year of construction: 1985, functionality: fully functional, cutting length (max.): 5,100 mm, cutting height (max.): 2,150 mm, power: 3 kW (4.08 HP), Machine in very good condition, as shown in the pictures. Kledpfx Agsw Upzrs Ujl Mains connection: 380V Rated current: 14.7A Saw unit power: 3kW Speed: 2830/5490 rpm

Condition: used, Year of construction: 2004, Saw unit: pivots 45°. Carriage length: 3200 mm. Maximum saw blade diameter: 450 mm. Saw blade bore: 30 mm. Motor power: 7.5 kW. Max. Cutting width: mm Control panel: at eye level Height adjustment: input via keyboard Tilt adjustment: input via keyboard Tilt angle display: digital Cutting width display: digital Table extension length: yes Cross-cutting at the cross stop: 3200 mm Cross stop display: scale Scoring device adjustment: electric Scoring blade: PSV Protective cover: yes End position lock: yes Automatic motor brake: yes Speeds: 2500/3500/5000 rpm Description: Cutting height at 450 sheets, 150 mm Weight approx.: 1180 kg Dimensions: 3200 x 1800 x 1800 mm Extraction diameter: 1 x 80, 1 x 120 mm Kledpfxox Ngzae Ag Uol Storage location: Nattheim

Condition: excellent (used), Year of construction: 2011, Altendorf Panel Saw F 45 Kljdsxiv Dhjpfx Ag Usl Double roller carriage with carriage length 3000 mm Cutting width: 1300 mm with Digit X Drive power: 5.5 kW Saw blade diameter: 500 mm 2-axis scoring unit Table extension: 840 mm Angle-mitre fence Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, Available by arrangement. Saw unit: tiltable 45°. Carriage length: 3200 mm. Max. saw blade diameter: 550 mm. Max. saw blade projection at 90°: 200 mm. Max. saw blade projection at 45°: 141 mm. Saw blade bore: 30 mm. Motor power: 5.5 kW. Max. cutting width: 1000 mm. Control panel: mounted at the lower machine housing. Control panel design: with buttons and LCD screen. Height adjustment: electric motor driven. Tilting adjustment: electric motor driven. Tilt angle display: on screen. Cutting width adjustment: manual with fine adjustment. Cutting width display: scale. Sliding carriage guide: steel. Table extension length: 840 mm. Crosscut at cross fence: 3500 mm. Cross fence display: scale. Cross fence design: tiltable. Speeds: 3/4/5000 rpm. Scoring unit: prepared—retrofit possible. PSV safety guard: Yes. End position lock: Yes. Automatic motor brake: Yes. Working height or infeed table height: 910 mm. Weight approx.: 1050 kg. Extraction diameter: 120/80 mm. Storage location: Kledpfx Aex Rdmpog Uol

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1705, travel distance Y-axis: 985 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, HOLZ-HER Vertical CNC Evolution 7405 PinJet, year of manufacture 2025, ex works delivery Workpiece clamping on the rear enables processing of the entire perimeter without reclamping (for workpieces up to 1500mm length) Workpiece size X = 200 - 3200 mm Workpiece size Y = 70 - 1200 mm (= max. passage size) Maximum milling dimension X = 1500 mm (without reclamping) Kjdpfx Aox Nqlpeg Uell Maximum drilling dimension horizontal X H = 1168 mm Z-stroke Z = 240 mm ECO-MODE energy saving Workpiece length measurement by laser 2x Campus V8 CAD/CAM software with process simulation for both machine and office Handheld remote control unit 2D barcode scanner Control panel with 21.5" flat screen Uninterruptible power supply (UPS) Milling unit 7830, power 10.3 kW Drilling unit 7885 with 19 spindles Vertical adapter with double presser force Integrated saw unit in X-direction Complete dowel unit with step conveyor 6-position linear pick-up tool changer Vacuum system Power 16 m³/h ECO-VAC intelligent vacuum system Hi-Speed USB Device Network Server Automatic central lubrication Xcut package tool set for doors Safety device Pumper Tool set for XL drilling head

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 blades, 30 x 30 mm Screen perforation: 15/20 mm or as required Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection rating: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start Klodpfxexru Hys Ag Ujl - Automatic shut-off in idle mode - Vibration-damping machine feet - CE-compliant - GS mark “dust-tested”