Injection molding machine

Stork verschiedene

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. Gbjdpfsrq D Niex Amzjp The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Gbodpou Eki Ssfx Amzsp Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Gbjdpjh Akm Tofx Amzjp

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system Gbjdpfegu N Alox Amzsp CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Gjdpfjxf Ii Usx Amzjbp

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer Gbedpfx Amsvppw Sezjp -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: excellent (used), Year of construction: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / Max. mould height 500 – 1,050 mm Maximum distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Maximum mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar Gbsdpjwy U E Usfx Amzop L/D ratio (screw length/diameter) 20 Electrical-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (auxiliary equipment)

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Gbedpjub Umqsfx Amzop Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Gbsdperfbnmefx Amzsp Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Gsdpfx Aehy Nx Ejmzjbp Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55