Panel saw SCM SI 300 nova

SCM SI 300 nova

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed Fpedpfewkbd Ejx Ad Nop - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment Fpjdjqy E Rlepfx Ad Njp six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: as good as new (ex-display), functionality: fully functional, Edgebander with most accessories in its technological range, with an excellent quality/price ratio. Work table dimensions 3465 x 710 mm Min. ÷ max. thickness of rolled edges 0,4 ÷ 3 mm Max. thickness of edges in strips 5 mm Min. ÷ max. panel height 8 ÷ 50 mm Min. panel length/width 190/110 mm Feed speed 9 m/min This edgebander increases productivity with the feed track of the panel brought to a speed of 9 m/min and it guarantees high quality standards in processing thanks to the possibility of working with polyurethane glue, perform grooves, all being extremely easy to use. MACHINE COMPOSITION: ME 40TR AUTOMATIC EDGE BANDER 109999 Security execution R00341 me 40tr versione CE 930731 Volt 400 EU 931201 Frequency 50 Hz 580653 EDGE SCRAPING UNIT 580444 BRUSHING UNIT 580654 GLUE SCRAPING UNIT 580656 Spare glue pot for poliurethane glue with fast unloading system 580509 Device for the panel edge heating 580510 Anti-adhesive unit Fpjdpfxsqw Ux To Ad Njp 580548 Spray-mist device for edge finishing 580658 "Nesting" copying device kit for Trimming unit 580659 "Nesting" copying device kit for Edge scraping unit 580666 Internal machine lightening

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Fpjdpfxevnv Uzs Ad Nsp Feed speed 6-36 m/min. Dimensions (L/W/H) 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31 also for window production ----- Machine is cleaned and functionally checked ! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools (technical data according to the manufacturer - no guarantee!)

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm Fedpfx Asha E S Ted Nepp The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: used, • Model – Genius 37 CT-S • Year of manufacture – 2007, serial number: 86592 • Max. glass size: 3300 x 2550 mm • Glass thickness: 3 – 19 mm • Can also cut shapes, offcut optimization, data input at the cutting table Fpodpfx Aswz U Hbjd Njp • With breaking bars and strong air cushions • Table can also tilt • Working height: 900 mm • Weight: 2600 kg

Condition: used, Year of construction: 2017, total width: 1,900 mm, total height: 2,150 mm, total length: 1,650 mm, Empty weight: 1.499 kg Price: On request - Year: 2017 - Documentation available: No Fpodjwl Uffepfx Ad Njp - CE marking present: Yes - Serial number: AB00002054 - Number of units [pcs]: 1 - └ Unit 1: - - Sanding belt length [mm]: 2150 - - Sanding belt width [mm]: 1150 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Voltage [V]: 400 - Current consumption [A]: 36 - Transport dimensions: 1650mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 1499kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 600 KG Additional Equipment Fjdpjv H E S Tjfx Ad Nopp Glue Pot Capacity: Max glue pot capacity 1 Kg (with optional 2 Kg glue pot) Gluing Unit:Edge gluing on open and closed curved panels of small and large dimensions/1 gluing roller/2 rollers to copy the shape of the panel/2 800 W resistors with electronic temperature control/Manual adjustment of the glue quantity/Glue temperature adjustment/Automatic edge cutting system PLC System: For setting the measurement and cutting of the edge with encoder reading Laser: Facilitates cutting programming for closed pieces without the need to measure the piece Piece Feeder: On/Off automatic piece feeder Work Surface: For edging and trimming small pieces Edge Magazine: Rolled edge magazine with idle roller system Trimming Group: 2 high frequency 0.5 kW motors with rotation speed of 15000 rpm /On/Off trimming unit/Pneumatic lifting of the two motors/2 brazed cutters R=3 Z=6/ Articulated Arm: Complete with workpiece depression table for edging and trimming large pieces This VITAP Eclipse edgebander was manufactured in 2018. Ideal for precise edge finishing, it ensures consistent performance for woodworking projects. Consider the opportunity to buy this VITAP Eclipse edgebander. Contact us for more information. Application Types Edge Banding

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Fjdpfx Ast R T Hcjd Njpp Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: good (used), Year of construction: 1997, 1. Barberan profile winding machine TYPE RP-30 Profile width 10-280 mm Profile height 2-80 mm Fpodpen Nv N Uefx Ad Nop Minimum profile length 500 mm The width of the material on the roll is a maximum of 280 mm Width of the veneer strips 25-280 mm Glue temperature 220 degrees C Diameter of the transport rollers 200 mm Width of the transport rollers 2 x 15 mm Maximum roller spacing 250 mm Feed speed 10-60 m/min Working height 900 mm Photos no. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 2. Friz profile winding machine Type Friz MR 30 The table is approx. 3200 mm long Profile winding machine Friz MR 30 for foils up to 300 mm Width Hardo adhesive applicator Pressure rollers Labeling table Everything as in the pictures, more pictures on request Dimensions approx. 15000 x 3000 x 3000 mm Weight approx. 5000 kg Photos no. 11, 12, 13, 14, 15, 16, 17