Sliding table saws SCM SI 400 EP Class 2004

SCM SI 400 EP Class

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm Kwsdpfx Aaoyabkvjlow • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz)

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm Kodsv S Hy Aepfx Aaloww digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: new, Year of construction: 2026, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Kwodpfxohp Rdlo Aalsw Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: used, Working width 500 mm Number of knives 4 St. Kwodpjx Eykgjfx Aalow knife system Streifenhobelmesser

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Kedpfoxwvqdox Aaloww Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Kodpfxjw Ix Alo Aaljww

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel Kjdpfx Aow I Uxcsalsww - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: new, Year of construction: 2026, Planer-thicknesser – versatile woodworking machine A planer-thicknesser is a versatile woodworking tool that allows for flattening, thicknessing, and smoothing wood surfaces. Ideal for carpentry and furniture manufacturing, it enables precise planing, edge processing, board production, creation of joinery components, and preparation of materials for gluing. This is a stable machine equipped with a high-quality cast iron table, cutting knives for material removal, an electric motor, and convenient adjustments that make it easy to operate. Also known as a jointer, the planer-thicknesser is designed for initial processing of both rough and hard wood, as well as soft lumber. Its purpose is to level, smooth, and bring wood to the desired thickness through mechanical processes. It’s especially valuable in carpentry and furniture production, where precision and repeatability are essential. Stable construction with enhanced weight for vibration resistance The machine weighs 170 kg and features wide, ground cast iron tables (250 mm), ensuring excellent stability and safe operation. Additional rubber feet allow vibration-free operation. VERSION with a high-performance motor – Total power (S6): 2.6 kW The PT260 planer-thicknesser stands out with its exceptionally powerful motor: Total power (S6): 2.6 kW Continuous power (S1): 2.0 kW Ksdpfx Aowt Axpealsww This is significantly more than what many competitor machines offer, translating into better performance and more stable operation. Stronger motor = better efficiency and easier processing of hardwoods. Hardwoods require more power to process, and this motor handles them with ease. Effortless conversion from jointer to thicknesser Switching between jointer and thicknessing functions is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the dust extraction hood. Precision and ease of adjustment Smooth table height adjustment with scale Central column-mounted thicknessing table with handwheel for height regulation 700x150 mm aluminum tilting fence with scale strip for accurate angle settings from 90° to 45° Technical Specifications: Parameter Value Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction port diameter 100 mm Tilting fence angle range 90° – 45° Number of knives 3 Knife dimensions 250x30x3 mm Table dimensions 1100x250 mm Thicknessing table dimensions 600x248 mm Max. planing width (jointer) 250 mm Max. planing depth (jointer) 5 mm Max. thicknessing depth (single pass) 2.5 mm Max. cutting depth (thicknesser) 3 mm Max. workpiece height (thicknesser) 180 mm Thicknesser feed rate 6 m/min Fence dimensions 700x150 mm Machine dimensions (L x W) 1100x250 mm Weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 400 V

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Power supply: 380 V Main engine power: 7 kW Kwedjv S Uz Iepfx Aalsw Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: excellent (used), OMEC 750 CE drawer joint milling machine Kjdpfx Aaotq U Acslsww The machine is designed for making connections of drawers, boxes, etc. The operator simultaneously gives two pieces of joined elements, then the machine Automatically mills the entire length Spindle on an eccentric Milling engine power 1.1 kw Spindle speed 18000 RPM Two working speeds 25 and 35 n/-1 Machining parameters: Front face thickness: min/max: 7/60 mm Side wall thickness: min/max: 10/30 mm Keyway height: min/max: 6/18 mm CE certificate Machine dimensions: 1300x700x1200h mm