SCM R9

SCM R9

Condition: good (used), Code: 0327 Brand: SCM Model: R/9 Router with automatic copying device for producing wooden elements, templates, chairs, contours, mirrors, special profiles Automatic copying device: Roller drive system (one movable and one fixed, coaxial with the tool) that automatically advances the workpieces, placed over a template Distance between spindle and column mm 915 Spindle vertical stroke mm 110 Table vertical stroke mm 200 Max distance between table and spindle mm 310 Conical connection MK 2 Rotation speed 10000/20000 rpm Motor Hp 5,5 Table dimension mm 900 x 750 Compressed air 6 bar Overall dimensions mm 1300 x 1650 x 1650 h Iedpfx Agsx Ig S Ao Ueal Weight kg 680 MACHINE NOT RECONDITIONED , SEEN AND LIKED UNDER THE CONDITION IN WHICH IT IS FOUND , WITHOUT ANY WARRANTY

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Iaodpfew Dp Ufex Ag Uel Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: used, diameter div. number 56x Iaedpswtrzyefx Ag Uel tool adaptor BT 40

Condition: used, Year of construction: 1997, - edge banding unit Iedpfed Inktex Ag Ujal - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AL1/003895, travel distance X-axis: 2,949 mm, travel distance Y-axis: 1,353 mm, input voltage: 400 V, Working area: 2500 x 1240 mm Z-axis travel length: 200 mm Passage height: 180 mm Drilling unit: Drill head with 10 + 4 spindles 6 individually selectable vertical spindles in X 4 individually selectable vertical spindles in Y 2 horizontal spindles in X (1+1) 2 horizontal spindles in Y (1+1) Spindle speed: 4,000 rpm Power: 2.2 kW Pitch: 32 mm Drill holder: M10 with 11 mm mounting face Extraction port: D=160 mm Milling spindle: Tool holder: HSK 63F Spindle speed: 1,500 – 24,000 rpm, stepless via inverter Motor power: 6.6 kW (9 HP from 12,000 rpm (S1)) Right/left rotation Ceramic bearings Prepared for automatic change of angle heads Grooving saw unit: Fixed in X-direction (longitudinal) Power: 2.2 kW (3 HP) Speed: 6,000 rpm Max. saw blade diameter: 160 mm Saw blade thickness: approx. 3.2–6 mm Saw blade bore: 30 mm Extraction port: D=200 mm Worktable: 4 supports, 900 mm, stepless manual adjustment in X 12 round vacuum pods, D=110 mm, stepless adjustment in Y (2 pods per support) 2 stops in X (1x left / 1x right) 1 stop in Y per support (total 6) Additional right-side stop with roller track for extending X-axis to 3,230 mm (2 clampings) Retractable reference stops are CNC-controlled Pendulum operation (2 working zones) Further technical data: Total connected load max.: 16 kW Recommended fuse: 64 A Iodpfx Aexxik Hjg Uoal Power supply: 400 V (50 Hz) Compressed air: 7 bar System pressure: 10 bar Compressed air consumption: 150 nl/min Central extraction port with flap control: D=250 or D=300 mm Extraction speed: 30 m/sec Air consumption: 3,400 m³/h Vacuum: 3,000 Pascal Machine weight: approx. 2,700 kg Required floor space: approx. 6,400 x 2,970 mm Loading dimensions: 4,400 x 2,200 x 2,500 mm

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Iaodpfx Aef A R Uhsg Usl Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 2000, condition: defective spare-parts repository (used), functionality: unexamined, Elumatec SBZ 130 bar machining centre for sale as a parts donor. Offered as: untested, it may be non-functional. Please refer to the images (manual/nameplate) for the technical specifications. Inspection by appointment. Machine dimensions: 9000 mm × 2400 mm × 1420 mm (L × D × H) Control panel dimensions: Isdjw Talxepfx Ag Ujal 870 mm × 680 mm × 1570 mm (W × D × H)

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. Iasdpfx Aow I Ug Hsg Uel All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: used, diameter div. number 40x tool adaptor BT 40 Iodpfxeww Nbxe Ag Uoal

Condition: good (used), Year of construction: 2014, operating hours: 8,000 h, functionality: fully functional, overall weight: 1,600 kg, total length: 1,800 mm, total width: 800 mm, total height: 2,150 mm, Becker Variair Central System VACS 0040 0030 ll Performance / power 24Kw 3 x vacuum pump Becker VTLF 2.250 Isdpjvzh Umofx Ag Usal Inlet capacity each pump: 244 m3/h, Together: 732m3/h Max Vacuum each pump: 200 mbar