Carbide end mill

Prototyp 10 x 22 /R 2

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Dkjdovllxdepfx Aa Iou Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Dedpfxjfy T H Ij Aa Ijku 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Modular milling cutter Module 8 20 degrees Length 1800 mm Dksdpfx Ajdklt Noa Ieu Diameter 120 mm Inner diameter 40 mm

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools Dsdpfx Aaewmwrdj Ioku approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Dksdexlngaopfx Aa Iou Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Dkedpfxspu R Ncs Aa Isu Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven Dkedpfxjw E Nnbe Aa Iju 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Dkodpfx Aaewpcfue Iju Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm -Y = 400mm -Z = 425mm Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Dedpfxeinur Ae Aa Ieku Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle Dedpfxoxz Ab Re Aa Ijku with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401