Jointer planer & thickness planer combination

SCM minimax

Condition: used, Year of construction: 2000, functionality: fully functional, – very good condition – Italian manufacture – year of production: 2000 TECHNICAL PARAMETERS: SURFACE PLANER: – working width: 410 mm – number of knives: 3 pcs – infeed table dimensions: 1030 x 410 mm Dedpfx Aoxl D Nqedhocn – outfeed table dimensions: 930 x 410 mm – adjustable fence – noise-reducing comb THICKNESSER: – planing height: 3–230 mm – shaft diameter: 72 mm – shaft speed: 5300 rpm – table size: 700 x 410 mm – feed speed: 7 m/min – main motor: 4 kW – machine dimensions (L/W/H): 200 / 90 / 120 cm – weight: 400 kg

Condition: used, turning diameter over bed 460 mm Dcedpfx Adexwp Ebshjn turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Year of construction: 2021, condition: used, Planing width: 410mm, working height: 3mm-240mm, max. stock removal: 5mm, feed speed: 12m/min, thicknessing table X/Y: 775mm/423mm, extraction port diameter: 120mm, operating hours: approx. 350h, weight: approx. 361kg. Equipped with 4-knife TERSA cutterblock for quick knife changes without adjustment or screws, solid gray cast iron thicknessing table with 4-column guide on four large spindles, integrated lifting device for a stable table position without additional locking, manual thicknessing table adjustment with numerical readout and reading accuracy of 1/10mm, helical-toothed steel infeed roller for gentle stock removal from 0.2mm and satin-finished steel outfeed roller. The machine is currently in storage. Dodpfx Ajzzdyusdhjcn

Condition: as good as new (ex-display), Year of construction: 2026, Combination machine, 4-in-1, HOLZKRAFT CU 410c F 26 N Tersa -- Technical data -- - Circular saw - Reach 2,600 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 100 / 79 mm Max. rip width to the left of the saw blade 2,310 mm Cutting width with parallel guide 900 mm Saw blade tilt 90° - 45° - Jointer - Working width 410 mm Jointer table length 1,660 mm Cutterhead diameter / number of knives 72 mm / 3 pcs. - Thickness planer - Table dimensions 410 x 605 mm Min./max. working height 3 / 230 mm Max. chip removal 4 mm Feed rate 7 m/min - Table router - Usable length of spindle 100 mm Max. tenoning tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 6,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter, saw blade guard 60 mm - Special offer price - Dsdpfx Adsd Dtc Tehecn Location: In stock, 54634 Bitburg

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. Dcsdpfsy Emf Rjx Adhon • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: new, Year of construction: 2025, Description Technical Data Scope of Supply Accessories Equipment Options Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables allow for easy planing of workpieces. The work tables are made of cast iron, making them durable and ensuring they remain perfectly flat. Planing tables that open simultaneously towards the rear, with spring-assisted support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, there is no need to change the dust extraction hose during adjustments, saving valuable working time. The helically toothed steel infeed roller ensures constant and uniform wood feed. The rubber outfeed roller at the end of the thicknesser ensures uniform wood discharge. Material feed with four speeds. Planer/thicknesser table adjustment via handwheel with integrated display for planer height. On/off switch in operator position. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Dcodpfx Adsff Hdmjhen Prepared for mortising attachment. Quality – Made in Italy. Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Chip removal, max. 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction port diameter, thicknesser 1 x 120 mm Drive power Main motor 7 kW Installation Information Space required, length 2250 mm Space required, width/depth 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thickener Thickening table length 520 mm Thickening table width 850 mm Working height, min. 3 mm Working height, max. 240 mm Working length, min. 220 mm Chip removal, max. 5 mm Electrical Data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min⁻¹ Planer width, max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Dodpfx Adehp Rcyjhocn Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Aluminum fence cheek

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 Dsdpfx Adjmhfrrjhscn - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Dedpjhp Rdlsfx Adhjcn Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and Weights Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Jointer Feed table length 1034 mm Maximum chip removal 5 mm Dust extraction connection Dust extraction port diameter Thickness 2 x 120 mm Thickness Minimum working height 3 mm Maximum working height 230 mm Maximum chip removal 5 mm Electrical Data Power of drive motor 5 kW Connection voltage 400 V Mains frequency 50 Hz Planer cutterhead Type TERSA Number of planer cutters 4 pcs Speed 5200 min⁻¹ Maximum planing width 410 mm Feed Speed 6 / 12 m/min The TERSA planer cutter system enables particularly quiet operation. Helically toothed steel feed roller for consistent and uniform material feed Material feed with two speeds Numerical display for thickness table height The 2,000 mm long jointer tables facilitate easy adjustment of large workpieces. Work tables are made of gray cast iron, annealed and stress-relieved, making them durable and dimensionally stable Stable, large aluminum jointer fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth operation. Powerful industrial motor Dodpfx Ashkz E Tjdhecn Robust steel/gray cast iron construction Equipment details Jointer fence Stable, large aluminum jointer fence (1200 x 160 mm) With precise round bar guide Dust extraction hose connection The dust extraction ports for the jointer and thicknesser point in the same direction during jointing and planing. Therefore, the dust extraction hose can be connected to the machine from the same side for both types of planing. You do not need a hose that runs around the machine. Planing unit Helically toothed steel feed rollers for consistent and uniform material feed Solid anti-kickback devices prevent workpieces from being thrown back 4-cutter shaft ensures an optimal planing result Chain drive Sturdy chain drive Drive gears made of steel Solid gray cast iron bearing block Two feed speeds Standard with two feed speeds Comfortably selectable from the operator panel Material feed Helically toothed steel feed rollers for a consistent and uniform material feed without marks Several teeth engage simultaneously for powerful feed Wear-free compared to rubber feed rollers Thickness table adjustment Adjustment via handwheel Numerical display for the set planing height Accuracy 1/10 mm Tersa planer cutterhead No more adjustment and screwing required Planer cutter change in seconds Self-locking Particularly quiet Perfect planing result Location: In stock, 54634 Bitburg - immediately available - Subject to prior sale

Condition: used, Gearbox, bevel gear, worm gear Dedpfxjt Snwxs Adhocn -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Condition: as good as new (ex-display), Year of construction: 2025, minimax ti 55es LL – Table saw The illustration shows the T 55 i elite s in its standard version. The professional machine for skilled tradespeople, featuring a pivoting milling spindle and 4 speeds. M Digital: motor-driven height adjustment and pivoting. Sturdy steel and cast iron construction. Oversized milling unit made of cast iron, pivoting up to -45° to the rear. LED display of milling speeds. Fast, trouble-free speed change via eccentric clamping. Clockwise/counterclockwise rotation. Display of height and inclination with 1/10 mm accuracy. Heavy-duty professional fence: with fine adjustment via rack and pinion, with numerical display, aluminum fence cheeks, 3-way positioning for quick repetition of the setting. Scope of delivery: Aluminum fence cheeks Arched milling guard Table extension on the left and right Model: minimax ti 55es LL Article no.: 5502252 Technical data Dimensions of the work table: 2500 x 655 mm Dimensions of the format sliding table Usable length of the spindle: 125 mm Max. tool diameter: 240 mm Max. tool diameter (lowered): 230 mm Max. tool diameter (dovetail cutter): 320 mm Spindle inclination: 0 to -45 degrees Dcsdpsdqzh Rjfx Adhsn Speeds: 3500/6000/8000/10000 min-1 Motor power 400 V/ 50 Hz / S6-40%: 5.0 kW Dust extraction port diameter: 2 x 120 mm

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Dsdpfxedqzh Tj Adhocn Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages Dodpfeghtvaox Adhjcn - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Dcjdpfod Hx Hmsx Adhsn Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -