Schenk plate filter

Schenk

Condition: like new (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: 1519 - 5016GW, Equipment: CE marking, The conditions are mint! Fully refurbished and upgraded the complete filter in 2017. Including haze and color control from Optek and new dosing pump, all process connections GEA Varivent, Profibus interface, including the heat exchanger and pipe panels and so on. There isn+t a single old pipeline on it! Last 5 years the filter was running really low and was cleaned more than running production. Dodpfx Ajw Ic A Nefneun Last operational 12.2024

Year of construction: 2018, condition: used, 2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate control of the thermo-oil-heated frame and bottom heating. The double-walled container is encased in insulating cladding and has a polished inner surface. The motor mounted on the top drives the chopper and agitator with infinitely variable speed control. A multi-part perforated false bottom is provided for lautering and a rectangular manhole on the side for sparging. In addition, the vessel is equipped with a hinged lid, CIP spray head, temperature probe and spray unit. - Stainless steel wort pan/whirlpool. The container is double-walled and has welded heating zones in the frame and bottom, which are heated with thermal oil. The vessel is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable lock and tangential wort inlet for knocking out. Polished inner surface. - Single-stage plate heat exchanger for cooling wort from 100 °C to 18 °C while simultaneously heating water from 13 °C to 77 °C. The wort from a brew can be cooled within approximately one hour. The plates are made of 1.4401 (AISI 316) stainless steel and the seals are made of EPDM. The wort cooler has a PT1000 temperature sensor. - Thermal oil heating for heating the laser-welded heating zones of the brewing vessels. In the thermal oil tank, approx. 50-65 l oil is heated electrically to a maximum of 150°C. A safety switch ensures that the heating is automatically stopped if the temperature exceeds 160°C. The vessel is equipped with a temperature and level probe. A pump circulates the thermal oil. - 12 hl hot water tank, standing separately on three feet, with a manhole on the top. The tank is heatable, insulated and equipped with a hose level indicator, temperature probe and hot water pump. - Centrifugal pump for product transfer between the tanks and for CIP cleaning with a motor power of 0.37 kW and infinitely variable speed control. - Stainless steel pipes and manual valves for diverting the product flows. The pipes are orbitally welded and have polished inner surfaces. - Control unit with 10" touchscreen and PLC for automation of the brewhouse, housed in a stainless steel control cabinet. The following processes can be controlled and monitored from here: 1. Switching the stirring and chopping unit on/off and speed control. 2. Temperature control of the mash/lauter tun 3. Temperature control for the pan/whirlpool (separate for bottom and frame) 4. Switching the product and CIP pumps on/off and speed control. 5. Display of inlet water temperature 6. Display of wort temperature at the outlet 7. Temperature control of the thermal oil tank 8. Setting of timers 9. Setting of the mashing programme (multi-stage mashing with up to 5 stages; setting of times, temperatures, rotation speeds of the stirrer and the pump) 10. Temperature of the hot water tank. Additional title: compact brewing block with warm water tank Cast wort capacity: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / Control: control cabinet with PLC and touch screen Material: stainless steel 1.4301 (AISI 304) Base construction: Brewing block on stainless steel frame, separate hot water tank Dedpfew Tbmdox Afnjun Features: Mashing/lautering tun; wort kettle/whirlpool; plate heat exchanger; oil heating; centrifugal pump; pipes and valves; hot ...

Condition: ready for operation (used), A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible. Dedex Sywtopfx Afnoun

Condition: ready for operation (used), Year of construction: 1980, Plate dimensions X/Y: 630mm/630mm, number of filter plates: 20, filter material: polypropylene, cake thickness: 25mm, max. filtration pressure: 12bar, filter area: approx. 12m², chamber volume: 160l. Machine dimensions X/Y/Z: approx. 2600mm/1200mm/1200mm, weight: approx. 1300kg. An on-site inspection is possible. Dusdpfx Aoyab Nrefnon

Year of construction: 2021, condition: refurbished (used), - Year of construction: 2021 Dsdpfov Nirisx Afnoun - Filter area: 130m2 - Ceramic modules - Porosity: 0.2micron (standard) Performance : - White wines: 7000 - 10000 l/h - Red wines: 5000 - 8000 l/h - Grape juice: 4000 - 5000 l/h - Fruit juices: 4500 - 6500 l/h - Filter factory-reconditioned - 12-month factory warranty on mechanical parts - Machine in new condition

Condition: used, Technical details: balancing body max.: 800 kg balancing body diameter: 1250 mm Balancing revolution per minute: 190 - 3600 U/min bed length: 2600 mm voltage: 380 V/Hz drive power: 7,5 kw Weight approx.: 1,5 t dimension machine xH: 3,5 x 1,7 x 2,0 m dimensions electric cabinet: B:650 x T:250xH:800 mm Horizontal balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission by means of cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm Measured speed: Dujdpfxsu Upp Ts Afnon 1st gear = 190 - 650 rpm. 2nd gear = 400 - 1250 rpm 3rd gear = 700 - 2100 rpm. 4th gear = 1200 - 3600 rpm. 2 pick-up blocks whose displacement is manual over the entire bed Schenk measuring device with digital display and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask! *

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Materials Testing Machine Type RME 250 kN • Load frame and drive by Schenk Trebel, year of construction 1985, total height approx. 3.3 m; traverse stroke approx. 2 m • Modernization around the end of 2003: equipped with the ZwickRoell "testControl" control electronics • Retrofit in 2010: MultiXtens universal extensometer system by ZwickRoell, with swiveling device and two pairs of measuring sensors (photo), and new testControl module • Note: The testControl module functions together with the current "testXpert III" software from ZwickRoell (software is not included in this offer) • Temperature chamber (photo) insertable into the test space of the machine, built in 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable down to approx. –40°C with liquid nitrogen • Load cells: 250 kN and 50 kN (currently installed, see machine photo); additionally: 5 kN, 1 kN, and 500 N (photo) • 2 wedge specimen grips (photo) Dsdpfxoyhb Rlj Afnjun Condition of the machine The machine was in use for testing until early 2026. The 50 kN load cell and the traverse displacement sensor were used (both sensors last calibrated on 06.05.2024 incl. standard inspection). A defect in the servo amplifier for the drive (component in the testControl module) has resulted, since autumn 2025, in frequent connection losses to the software and halt of the drive until hardware/software reboot. The servo amplifier or the entire testControl module need to be replaced (cost details available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021, but has not been used since then. The other load cells, MultiXtens system, and temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units shown installed in the machine on the pictures will be removed and remain with the supplier.

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit Dsdpfsrai N Aox Afnjun - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: good (used), Used SCHENK plate filter, fitted with 9 plates in the 400 × 400 mm format, designed for filtration of wine, juice, must, and food-grade liquids. This compact model is particularly suitable for small to medium-scale production, filtration trials, or occasional clarification operations. Its robust construction, combined with a mechanical screw-type tightening system, ensures stable operation and easy daily use. The filter accommodates standard 400×400 filter plates, which are readily available on the market. TECHNICAL SPECIFICATIONS - Manufacturer: SCHENK - Type: Horizontal plate filter - Number of plates: 9 - Plate size: 400 × 400 mm - Structure: Stainless steel frame and plates - Clamping: Mechanical with central screw - Instrumentation: Pressure control gauges - Connections: Stainless steel - Mobility: Mounted on wheeled frame CONNECTIONS AND INSTRUMENTS: - Inlet/outlet connections: DIN 50 - Inlet/outlet pressure gauges - Sampling valves - Drain valves ADDITIONAL INFORMATION: - Filtered liquid: WINE DIMENSIONS: - Overall length: 1100 mm - Overall width: 500 mm Dusdpfx Ajyf Hlpsfnon - Overall height: 840 mm Compact footprint, easy to install in any existing winery or workshop. ADDITIONAL ITEMS: - 6-month warranty - CE compliant

Condition: used, Surveillance camera, video surveillance -Line camera lens optical industry 3 550 450 -Come: from a warehouse liquidation -is sold unchecked with no guarantee -Dimensions box: 80/185/H120 mm -Weight: 1.2 kg Dusdpfxjb N E Hds Afnjn

Year of construction: 1991, condition: excellent (used), Cartridge filter VelaCart B750 of the company Seitz-Filter-Werke Duedpfx Aofbckujfnjn Type: VELAcart B750 - 16H07 DN 080 Year of construction: 1991 Factory No.: 1992 Filter insert: Candle Capacity: 105 litres Clamp screw type: M20 x 85 A2 (10 pieces) Candles: Quantity: 16 pcs. Length:73 cm Mesh size: 5 x 3 mm (length x width) Container: Permissible operating pressure (bar): Liquid 10 / Gas 10 Permissible operating temperature (°C): Liquid 85 / Gas 85 Dimensions: Height: approx. 1.78 m width: approx. 56 cm Weight: approx. 150 kg In very good condition!

Condition: good (used), Control card, controller, PLC controller, optical card, optical control card, optical interface -Manufacturer: Dr. Schenk Industriemesstechnik, Optical Control Card -Type: XVP2, Optical 4160631 -Box dimensions: 280/200/H50 mm Dujdpehh Dt Sefx Afnon -Weight: 0.8 kg

Condition: used, Year of construction: 2007, Technical details: balancing body max.: 100 kg balancing body diameter: max. Ø 800 mm swing diameter: 630 mm Balancing revolution per minute: 120 - 1200 U/min drive power: 4 kW Weight approx.: 0,6 t dimension machine xH: 1,8 x 1,2 x 1,4 m Dusdpfxjvc Apzj Afnsn dimensions electric cabinet: 650 x 700 x 1900 mm Vertical balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Unbalance static=2 and dynamic=3 Measuring device CAB 803 Display Screen Computer RS232C Basic system dynamic unbalance in 2 levels Operation via control panel on the switch cabinet / 2x foot switch No printer available! *

Condition: ready for operation (used), A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible. Dodpfx Afswd Talensun

Condition: excellent (used), Here we offer an inspection device for crystal silicon solar modules. Reliable quality assurance & process control during the entire solar module production The Dr. Schenk solarInspect series was developed to meet the special requirements in the production of crystal silicon solar modules. These ready-to-use Vision Systems provide reliable quality control for the entire ongoing production process. In addition, in the event of process deviations, continuous monitoring of the production process can be corrective action in good time. In the production of crystal silicon solar modules, structural glass substrates are used instead of uncoated glass. Structural glass increases the permeability of sunlight. The optical signals in the vision system, which are characterized by the surface structure, Dodpfed N Ervsx Afnjun which is usually used for glass substrates of silicone solar modules, are often similar to, or even stronger than, the error actually inspected. With SolarInspect, Dr. Schenk has developed and manufactured a system that aims to distinguish between glass structure and and errors on the entire material surface, including the edges. Thanks to an innovative optical design, Dr. Schenk's inspection system can clearly detect the glass defects and distinguish them from the glass structure. Reliable inspection of - uncoated input glass -