Used Metalski Zavod Tito for sale (83)

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, machine/vehicle number: ys61025, total width: 4,000 mm, table width: 1,200 mm, Equipment: USB port, stylus option Godpexmuxxjfx Aacekc

Condition: good (used), Year of construction: 1982, sheet width 2000 mm plate thickness 2 mm distance between columns 2080 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0 x 1,2 x 1,5 m Hydraulic swivel bending machine - max. dimensions of the sheet to be bent: 2000 x 2 [mm] Gkodpfxow N S Eij Aacec - Power of the electric motor: 2,2 kW - Bending angle: 0 - 180 degrees

Condition: used, Unique opportunity: We are clearing out our stock of Trumpf tools (multitools 4-position and 6-position, thread formers, number and letter tools). IMPORTANT: All tools are only compatible with TC 240, TC 260, TC 500, and TC 600 series machines. They are NOT suitable for the Trumpf 1000 series. The original purchase price was approximately €80,000 – €90,000. SPECIAL PRICE when purchasing the entire lot: €5,000 net. Hello Mr. Fuquene, I have taken additional photographs of all the tools for you. The price is a special flat rate for the complete set; the original price of these tools is around €85,000 – €90,000. Tool list: - 14 pcs. 6-position multitools - 70 pcs. 6-position die holders - 7 pcs. 4-position multitools - 32 pcs. 4-position die holders - 2 boxes of spare parts for the multitools, punches, dies - 2 pcs. thread formers - 1 pc. number tool - 1 pc. letter tool Gjdpfxexcmpuo Aacjkc If you have any questions, please do not hesitate to contact me.

Condition: like new (used), Rondo line for thin pastry, was set up to produce thin pastry to manufacture samosas but can be used for any fine pastry manufacture. Starts with elevated conveyor, 6 roll dough extruder 650mm wide, various 700mm wide conveyors with guillotines and dusters. Was set up to cut the pastry into 75 x 173mm 8 across, 90 x 213mm 7 across and 110 x 254mm 5 across. We would need to check first if all the sizes are here, not confirmed, just read from the order form. Lins is approx 22m long. All belts have perished, this has been in safe storage for many years as it could not be sold to competitors in the UK. Gedpfx Ajh Rwlfoacjkc

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool Gkedpfsxld R Iox Aacec

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 215 mm, travel distance Z-axis: 520 mm, quill diameter: 72 mm, quill stroke: 110 mm, overall weight: 3,070 kg, swing diameter over bed slide: 500 mm, swing diameter over top slide: 220 mm, Equipment: chip conveyor, CNC lathe OPTIturn S600 slant bed with Sinumerik 828 D control system, including the following options: - Safety Integrate - Remnant material detection and processing - Shopturn step programming - Network drive management - 3-D simulation - Real-time drawing/track back - 15.6-inch color display, multitouch - Spindle mount DIN ISO 702-1 No. 6; chuck through-hole Ø 65mm; hydraulically operated chuck Ø 215mm; tailstock mount MK4 - Hydraulic tool turret LS200 with 12 tool stations, max. holder height 25mm - 30° slant bed for especially large machining diameters - Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity - Handwheels for manual movement - Heat exchanger on control cabinet - Includes machine feet - Hydraulic unit 1500W, 60 liters - Foot pedal for hydraulic chuck clamping/release - Foot pedal for tailstock with hydraulic quill - Halogen work lamp - Siemens servo motors on all axes - Chip conveyor - Chip trolley - Device for manual tool measurement - Portable electronic handwheel - Renishaw tool probe - Includes machine feet - Electrical connection, 31 KVA three-phase 400V ~ 50 Hz - Control upgrade PPU290 SW8 - Sauter turret VDI30-12T - Automatic tailstock movement - Through-spindle coolant 20 bar - Oil skimmer - Coolant pump 5 bar - Automatic tool measurement Gksdpfew U Rv Dsx Aacec - Automatic parts catcher - Axial driven tool holder - Radial driven tool holder

Condition: excellent (used), Year of construction: 2018, operating hours: 21,346 h, functionality: fully functional, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface Gjdoxhmtwepfx Aacjkc - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. Gkodpfx Aaetyyvwscjc They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, MANITOU MRT 2660 360 160Y ST5 S1 Drehbarer Teleskoplader Dieselmotor Anbaugeräte auf Anfrage Technische Daten der Maschine: max. Tragkraft: 6.000 kg Tragfähigkeit bei max. Ausladung: 300 kg (Maschine auf Rädern) Hubhöhe Teleskoparm: 25,9 m max. Reichweite: 21,7 m Baubreite: 2,5 m Bauhöhe: 3,1 m Bodenfreiheit: 0,36 m Oberwagen: gelagert auf doppeltem Drehkranz mit Innenverzahnung, Drehsystem mit Negativbremse, endlos drehbar 360° Bereifung vorne/hinten: 445/65 R22.5 TLAG P23 AEOLUS Motor: YANMAR - EU STAGE V, Typ 4TN107FHT-6SMU1 wassergekühlt 4 Zylinder, 156 PS / 115 kW, 4567 cm³ Antrieb: Speedshift-Steuerung und Hydrostat von Danfoss 2-Gang Dana 367N Synchronisationsgetriebe Fabr. Bosch-Rexroth hydrostatischer Antrieb mit automatischer Leistungsregulierung, 2 Geschwindigkeiten, elektromagnetische Schaltung, automative Bedienung und Incheinrichtung, Allradantrieb Achsen: verstärkte Vorder- und Hinterachse mit Planetenantrieb im Endantrieb, Doppel- gelenken für engen Wenderadius (Radeinschlag) an Vorderachse +/- 8° (15%), Hinterachse pendelnd mit automatischer hydraulischer Sperrung bei der Drehung +/- 7,5°, seitlicher Niveauausgleich +/- 7° Bremsen: Ölbad Lamellenbremse mit Bremskraftverstärkung an Vorder- und Hinterachse Parkbremse: automatische negative Parkbremse Lenkung: 2-Rad Lenkung, 4-Rad Lenkung, Kriechgang Hydr. Steuerung: elektroproportionale, feinfühlige Steuerung über 2 Joystick, Kreuzsteuerhebel links und rechts vom Fahrersitz Stützen: einfache Teleskop-Abstützung, Stützenbefehle einzeln oder gleichzeitig steuerbar Sicherheitseinrichtung: optisches und akustisches Signal und automatische Lastabschaltung, Sicherheitsventile und Schlauchbruchsicherung an Hub-, Neige-, Teleskop- und Abstützzylinder, Lastkontrollsystem zur Überwachung der Resttragkraft, hydr. Last- Moment-Abschaltung Zugkraft: 8700 daN Eigengewicht: 18.000 kg Serienmäßige Ausstattung: - auf Gummi-Silentblöcken gelagerte neue Druckkabine mit Heizung und Lüftung (Kabine entspricht den Normen ROPS und FOPS Stufe 2) - 3 zusätzliche Einstiege im Rahmen - Easy Step (einfacher Einstieg) - LED-Scheinwerfer am Kabinenzugang (Türlicht) - Mechanisch gefederter Stoffsitz Gkedpfjxgvfasx Aacoc - Verstellbare und teleskopierbare Lenksäule - Frontscheibenwischer und Heckwischer mit Scheibenwaschanlage - Multitouch-Farbdisplay an der Armlehne montiert (höhenverstellbar) - übersichtliches Armaturenbrett mit Betriebsstundenzähler, Temperaturanzeige für Kühlwasser, Verstopfungsanzeige für Hydrostat- und Luftfilter, Ladekontroll- und Öldruckanzeige - Sonnenblende an Dachfenster und Windschutzscheibe - Einteilige Windschutzscheibe bis zum Dach - Innenrückspiegel - Elektrischer Spiegel links und rechts mit Entfrostung - Rückfahrkamera - StVZO Straßenbeleuchtung - Rundumkennleuchte orange - Rote LED-Alarmblinkleuchte - Weiße LED-Blinkleuchte bei Betrieb über Fernbedienung - Batteriehauptschalter - Batterie 2x12V - 180 A/H -1200A - Rücklaufleitung zum Hydrauliktank - Hydraulikleitungen für Zubehör am Teleskopkopf mit Schnellkupplungen - programmierbarer Arbeitsbereich - Reduzierung der Geschwindigkeiten bei Bewegungen - Rückfahrwarnsignal - Automatische Nivellierung der Abstützung - Automatische Radausrichtung - Bühnenvorbereitung inkl. Funkfernsteuerung - automatische Anbaugeräte-Erkennung E-Reco (soweit vom Anbaugerät unterstützt) - TÜV Vorbereitung als selbstfahrende Arbeitsmaschine 20 km/h oder 40 km/h - Easy Link Standard Modul

Condition: ready for operation (used), Year of construction: 1996, Immediately available from site: CNC Punching – Nibbling Machine Trumpf Model: TC 500 R SM 1306 Year of manufacture: 1996 Operating hours: 81,000 CNC control: Sinumerik 840 D TrumagraphCC 220 S Working area: 2535 x 1280 mm Punching force: 22 tons Sheet thickness up to 8 mm Workpiece weight up to 150 kg Max. positioning speed (simultaneous X – Y axis): 108 m/min Continuous C-axis rotation: 360 degrees Maximum stroke rate: 900 strokes/min Max. number of tools: 18 Automation components: Standard configuration CheetMaster 1306 Sheet Master Grip Master Cassette with multitool for numbers 0 – 9 Cassette with multitool for diameters 1.0/2.0/3.0/4.0/5.0/6.0 mm Each 1 cassette with thread former M3, M4, M5, M6 Truma Grip Truma Sort L Chip conveyor with container Equipment: Multitool actuation Thread forming function Marking function Slitting function 3 clamps Scratch arm machining Small part sensor with part chute Part blowing device Gedpexld Tpsfx Aacskc Pneumatic follow-up cylinders Softpunch Memory expansion to 256 KB Vibration-damped installation Supplied tools: Multitool 6-station Multitool 12-station Price: €8,000.00 ex site, plus VAT Alternatively, price: €12,000.00 plus VAT, including dismantling, removal, and loading

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. Gjdpfx Aaeu Dnruocekc At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 22, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 517 Sprinter Lord Comfort low-floor vehicle available for immediate delivery. Equipped with GSR2 systems, which are mandatory as of July 8, 2024. Many competitors offer vehicles without these systems! Base vehicle: - 125 kW Euro 6 e engine - 9-speed automatic transmission - Front air conditioning and original MB passenger air conditioning - Auxiliary heater - Driver's air-sprung seat with seat heating - Roof-mounted warning lights - Driver comfort package - Length: 7,336 mm - Rear view camera and PDC front/rear (Parking package) with front camera - Blind spot assist - Turn assist system - MBUX 10" (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Start information assist - Intelligent speed assist - Distance assist - Rain sensor - Electrically adjustable exterior mirrors - Cruise control Gkodpexmr Nzjfx Aacjc Body conversion: - Thermal and acoustic insulation - Electric exterior swing door with recessed step - 22 + 1 passenger seats / sleeper seats - Total capacity 22 + driver (+ optional standing places); optionally reduced to 19+1 - VIP blacked-out double glazing - Convector heating in the passenger compartment - Roof hatch - Single luggage rack on the left - Original MB free-flow air conditioning in the passenger compartment - Passenger compartment interior lighting in white/orange - Curtains - Add-on parts painted in vehicle color Net export possible.

Condition: new, Year of construction: 2025, The Hebrock K 36 Top equipment with motorized adjustment - Exhibition piece - New machine - - immediately available - This Hebrock endurance racer offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily use. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock is setting new standards in the field of perfect edge processing of various edge thicknesses. max. edge thickness: 3 mm max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 60 mm Godoi Am Ukepfx Aacekc Min. workpiece length approx. 140 mm Feed speed approx. 15 m/min. Ready for operation approx. 6 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36 - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touch screen), hot melt adhesive application to the workpiece workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 3 mm routing depth, maintenance-free, coated glue tray with HF double-motor cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with pneumatic trimming adjustment and interchangeable panel trimmer (combi version), corner rounding trimmer, radius scraper, surface scraper (incl. cleaning station, robust chain drive, ball-bearing mounted double roller top pressure, unit viewing window from the rear of the machine and operator side, signal lamp for workpiece sequence, extendable workpiece support, feed approx. 15 m. support, feed rate approx. 15 m/min, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change equipment for corner router 36/08/2/1 additional exchangeable motor corner router R=1 36/09/1 Multi-radius scraper 36/24/1 Release agent spraying device 36/24/2 Cleaning agent spraying device 36/25 Protective spraying edge 36/27 Nesting (1x milling station + 1 x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/bevel) 36/45 Axis package Motorized adjustment of panel, edge thickness and joint milling depth jointing depth adjustment Location: ex stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 200 kg, empty load weight: 6,700 kg, construction height: 1,970 mm, fuel type: electric, total length: 6,050 mm, drive type: Elektro, arm reach: 7,600 mm, construction width: 1,750 mm, working height: 17,000 mm, Articulating Boom Lift Condition: New equipment Technical Condition: New Front Tire Type: Non-marking Front Tire Condition: 80 - 100% Rear Tire Type: Non-marking Gsdpfoxburnex Aacjkc Rear Tire Condition: 80 - 100% Description: The electric articulating boom lift 170 AETJ-L offers a lifting capacity of 200 kg at a working height of 16.90 m. Compared to competitor models, it features lateral outreach and exceptional up-and-over reach, making it easier to work at various points and heights without needing to reposition the lift. The pendulum arm's swing range (+/-70°) further expands the potential working area. The high-quality standard battery guarantees many operating cycles. This aerial work platform is an excellent choice for use in tight and crowded spaces. In transport mode, the height remains under 2 m, making the compact platform easy to stow. SMS Safe Man System

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, saw band length: 4,520 mm, saw band width: 34 mm, total height: 1,800 mm, total length: 2,510 mm, total width: 2,280 mm, overall weight: 1,450 kg, power: 3 kW (4.08 HP), Exhibition machine, year of manufacture 2023/11, TOP CONDITION including material detection sensor including cutting line laser including micro-spray system including cut path monitoring For sawing hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics Gkjdpsxm Sc Usfx Aacsc Compact design with minimal distance between saw arm guide and vise for low-vibration operation Saw arm with travel measurement sensor for determining the position above the workpiece and an additional lower end position sensor Saw blade guide with adjustable carbide plates for precise cutting Sturdy saw blade guide mounted on linear rail Front blade guide moves parallel to the movable vise jaw – ensures more stable blade guidance Infinitely variable saw blade speed adjustment from 20 - 100 m/min Hydraulically driven chip brush Cut touch function with integrated sensor With frequency inverter for stepless saw blade speed adjustment Chip removal brush for optimal cleaning and maintenance of the saw blade Automatic blade guide adjustment Hydraulic blade tensioning device Vise with pressure reducer Operation via modern and powerful Siemens HMI multitouch panel Saw blade guides with integrated cooling system

Condition: new, Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,620 mm, grinding belt width: 1,400 mm, Heesemann multi-purpose surface grinding machine, type HSM .4 NEW Edition RQHD ROLLER/TRANSVERSE/LONGITUDINAL DLB/DB-S Sanding width 1,350 mm Stand construction with transport bed With continuous transport carpet, feed speed 3 - 15 m/min. frequency-controlled, workpiece thickness (3 - 200 mm) motor-adjustable Automatic workpiece thickness measurement in the machine infeed Workpiece suction clamping system with adjustable vacuum for transporting workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Non-driven rollers (2 each in the machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multitouch color display, CF card, Windows Embedded Standard operating system, touch screen version, display for production and downtimes. Ethernet connection possible. Program memory for 100 programs Gksdsu Ic Rgjpfx Aacoc Program for remote maintenance Program for extraction flap control For the extraction flaps/sliders to be installed by the customer, the external pneumatic valves can be controlled with any external operating voltage, e.g. (115V AC / 230V AC / 24V DC) via the pre-installed, potential-free relay contacts. MMI package consisting of: - Intuitive machine operation with self-explanatory symbols - Outfeed and infeed LED strips as operator assistance for the workpiece (infeed workpiece positioning for better sanding belt utilization, outfeed indicates workpiece position) - Belt manager status display on the unit (screen) - Aggregate information with grain size (screen) - Visualization of the position of the workpiece as it passes through through the machine. - Video camera in the outfeed of the machine 1 contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Diameter: 200 mm 1 cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency converter 1 longitudinal sanding unit with pressure flap belt system Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 9 m/s (with pressure flap belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 15 kW frequency converter Infinitely variable adjustment of the sanding belt speeds, wear-free braking device, automatic compensation of any differences in belt edge lengths, sanding belt working in counter-rotation, oscillating sanding belt cleaning, adjustable. 2 pressure bars with computer-controlled selective pressure control system CSD® (10 year warranty) In addition, the electromagnetic CSD® system is maintenance-free, as there is no risk of contamination as with pneumatic elements. 1 Rotating disk brush unit DB-S 10 driven disk brushes, working in 2 directions of rotation, central height adjustment for abrasive wear, incl. quick-change device for disk brushes Brush fill: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt tracking monitoring in the event of a temporary interruption in the power supply Energy Management System EMS Belt support side: left Terminal: front left Workpiece stripping device LED lighting inside the machine (on the belt support side) Further information on request.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, punching force: 22 t, laser power: 3,200 W, X Working area max.: 2550 mm Y Working area max.: 1250 mm Control: Rexroth IndraMotion MTX Laser power: 3200 watts Standard equipment: Machine - Stable, easily accessible C-frame - Moving ball roller tables - Linear magazine for tool stations and clamping claws - 22 tool stations, 3 clamping claws - Foot switch for closing the claws - Flap for punched parts 500 x 500 mm incl. sensor - Chip container - 2 good part containers (punching and laser side) - Initial filling of hydraulic oil - ContourLine - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Fast flap for laser parts 500 x 500 mm incl. sensor - Raisable laser cutting support - Slag cone detection TRUMPF Laser - CO2 laser TruFlow 2700 - Optimized standby mode - Maintenance-free turbo radial blower - High frequency excitation - Laser control TASC CUTTING HEAD - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine PUNCHING HEAD Godpfx Aoxbclvsacokc - Electro-hydraulic punching head - Hydraulic single tool holder - 360° rotation - Programmable hold-down device (active / passive / repositioning) - Tool length compensation - Spray lubrication of punch - Punch slug extraction - Level monitoring of thread forming and tool lubrication CONTROL - Open control based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via Internet - Automatic switch-off - Data transfer - USB interface - RJ45 network connection SAFETY - CE marking - Multi-beam light barriers - Quick hydraulic shutdown - Bulge detection - Calculation of filling level in the punching console + Laser TruFlow 3200 including LensLine and optimized standby + Nozzle changer + Thread forming function including thread counter + MultiBend function + MultiTool function + Deburring and rolling technology + Active die + Adaptive stroke calibration + Spray lubrication of die + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading aid + Blow-out device for small parts + 10 RTC setup cassettes with die plate Automation: + Sheetmaster for sheet metal 2500 x 1250 mm - Suction frame with 36 suction cups (Y-axis=400mm) - Movable suction bar (V-axis=170mm) - Peeling suction cup - Vacuum sensors - Sheet thickness gauge for double sheet control - automatic clamp closing - SheetMaster parallel to main time + Peeling system + Additional package with 9 suction cups + Unloading monitoring + SortMaster Pallet lengthways + GripMaster for sheet metal 2500 x 1250 mm + Scissor lifting table 400 mm + Tiltable scrap pallet 2500 x 1250 mm + Toolmaster 70 + ToolMaster parallel setup + Parts conveyor belt punching station + Parts conveyor belt laser station + Storage interface

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 23, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 517 Sprinter Lord Comfort long-distance vehicle available for immediate delivery. Equipped with GSR2 systems, mandatory since July 8, 2024. Many competitors offer vehicles without these features! Base vehicle: - 125 kW Euro 6e engine - 9-speed automatic transmission - Front air conditioning - Auxiliary heater - Driver’s air-suspended seat with seat heating - Roof-mounted marker lights - Driver comfort package - Length: 7,336 mm - Reversing camera and front/rear PDC (parking package) with front camera - Blind spot assist - Turn assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure monitoring sensors - Attention assist - Active lane keeping assist - Starting information assistant - Intelligent speed assistant - Distance assistant - Rain sensor - Electric exterior mirrors Godpfoxmrudsx Aacjkc - Cruise control Conversion: - Thermal and acoustic insulation - Rear extension by 500 mm, resulting in a total length of 7,886 mm - Electric outward swinging door with recessed entry - 22 +1 +1 passenger seats / sleeper seats - Total capacity: 22 + tour guide + driver (option to reduce to 19+1 on request) - VIP double-glazed privacy glass - Convector heating in passenger area - Roof hatch - Simple luggage racks left and right - USB ports at every row - Half podium - Expanded luggage compartment - Last seat row adjustable (larger luggage area) - Webasto air conditioning in passenger area (second compressor) - White/orange interior lighting for passenger compartment - Curtains - Add-on components painted in vehicle color Net export possible.

Condition: used, Year of construction: 2007, operating hours: 71,182 h, functionality: limited functionality, punching force: 22 t, workpiece weight (max.): 230 kg, laser power: 2,700 W, tool length: 37 mm, punching diameter: 75 mm, positioning accuracy: 0.01 mm, overall weight: 15,000 kg, workpiece height (max.): 30 mm, workpiece length (max.): 3,700 mm, workpiece width (max.): 1,500 mm, positioning speed: 90 m/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, sheet thickness copper (max.): 4 mm, sheet thickness brass (max.): 4 mm, cutting force: 200 t, compressed air connection: 6 bar, repeat accuracy: 0.01 mm, space requirement height: 2,400 mm, space requirement length: 18,000 mm, space requirement width: 9,100 mm, Equipment: cooling unit, safety light barrier, The machine will be available from week 42 as agreed. Additional equipment: - Widening of the C-frame, allowing loading of sheets up to 3800 x 1500 mm with the SheetMaster - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/High-speed beading function - MultiBend function - Roll technology Gkedoxa Dx Ujpfx Aacoc - Post-processing cylinder - Warping detection - Chip conveyor Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see image) (Specifications and technical data are subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2001, condition: used, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Gkjdpfx Aewirkgoacjc Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,263 h, load capacity: 1,200 kg, lifting height: 3,150,000 mm, fuel type: electric, mast type: triplex, Equipment: additional headlights, lighting, pallet forks, sideshift, Top used equipment - new UVV - fully reconditioned | buy or rent | please contact us! The LINDE E 12-01 used forklift truck from 2011 is completely refurbished and reconditioned. The E 12-01 lifts up to 1200 kg to 3150 mm with a DUPLEX mast. We last read 5263 operating hours. Our trucks are carefully selected and refurbished. Rental periods: up to 6 months: 800 €/month up to 3 months: 900 €/month up to 1 month: 1000 €/month See our electric forklift truck for yourself and watch the video: Feel free to compare our devices with competitor products! You won't find anything comparable in a hurry. We have not only carefully selected and refurbished these devices, but also offer you a competent service (3 master craftsmen, 2 technicians, 10 service technicians, 90 years of industry expertise) and spare parts supply. As a rule, we have every part in stock and have known every trick in the book for decades. If you have any questions or problems, we can also help you personally over the phone. With us, you will meet knowledgeable people who will treat you as equals and take time to deal with your concerns. Does this appliance not meet your requirements? Discover our entire range of forklift trucks here in the store. Do you have any questions about this product? Please feel free to contact us. Call us on 0461 / 90 93 374 or send us an e-mail to companyshop Gksdpfetzn I Njx Aacoc

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 23, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x 517 Sprinter Lord Comfort Low-Floor Vehicles available for immediate delivery. Equipped with GSR2 systems, mandatory since July 8, 2024. Many competitors offer vehicles without these systems! 2 vehicles in stock: - 1 with flat floor - 1 with half podium (no wheel arch) and lowered luggage compartment. Gkodpfsxf Shhex Aacsc Base vehicle: - 125 kW Euro 6 e engine - 9-speed automatic transmission - Front air conditioning - Auxiliary heater - Driver’s suspension seat with seat heating - Roof marker lights - Driver comfort package - Length: 7,336 mm - Reversing camera and PDC front and rear (parking package) with front camera - Blind spot assist - Turn assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Start information assist - Intelligent speed assist - Distance assist - Rain sensor - Electric exterior mirrors - Cruise control Interior conversion: - Thermal and acoustic insulation - Rear extension by 500 mm, total length 7,886 mm - Electric outward swinging door with lowered entry - 22+1+1 passenger seats / sleeper seats - Total capacity: 22 passengers + tour guide + driver (can be reduced to 19+1 on request) - VIP black-tinted glazing (double glass) - Convector heating in passenger compartment - Roof hatch - Simple luggage racks left and right - USB ports at every seat row - Webasto air conditioning in passenger compartment (second compressor) - White/orange interior lighting in passenger area - Curtains - Attachments painted in body color Net export possible.

Condition: refurbished (used), Year of construction: 2016, operating hours: 9,995 h, load capacity: 1,800 kg, lifting height: 4,625,000 mm, fuel type: electric, mast type: triplex, Equipment: additional headlights, lighting, sideshift, Top used equipment - new UVV - fully reconditioned | buy or rent | please contact us! The LINDE E 18 used forklift truck from 2016 is completely refurbished and reconditioned. The LINDE E 18 lifts up to 1800 kg to 4625 mm with a TRIPLEX mast. We last read 9995 hours. Gjdpfx Ajtzn Nyoacokc Our equipment is carefully selected and refurbished. See our electric forklift truck for yourself and watch the video: Feel free to compare our equipment with competitor products! You won't find anything comparable in a hurry. We have not only carefully selected and refurbished these devices, but also offer you a competent service (3 master craftsmen, 2 technicians, 10 service technicians, 90 years of industry expertise) and spare parts supply. As a rule, we have every part in stock and have known every trick in the book for decades. If you have any questions or problems, we can also help you personally over the phone. With us, you will meet knowledgeable people who will treat you as equals and take time to deal with your concerns. Does this appliance not meet your requirements? Discover our entire range of forklift trucks here in the store. Do you have any questions about this product? Please feel free to contact us. Call us on 0461 / 90 93 374 or send us an e-mail to companyshop

Condition: refurbished (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,490 h, load capacity: 1,600 kg, lifting height: 4,620,000 mm, fuel type: electric, mast type: triplex, Equipment: additional headlights, lighting, sideshift, Product information "LINDE E 16 H-02 - 1600 kg up to 4620 mm" Top used machine - new UVV - fully reconditioned | buy or rent | please contact us! The LINDE E 16 H-02 used forklift truck from 2017 is completely refurbished and reconditioned. The E 16 H-02 lifts up to 1600 kg to 4620 mm with a TRIPLEX mast. We last read 4490 hours. Our devices are carefully selected and refurbished. See our electric forklift truck for yourself and watch the video: Feel free to compare our equipment with competitor products! You won't find anything comparable in a hurry. We have not only carefully selected and refurbished these devices, but also offer you a competent service (3 master craftsmen, 2 technicians, 10 service technicians, 90 years of industry expertise) and spare parts supply. As a rule, we have every part in stock and have known every trick in the book for decades. If you have any questions or problems, we can also help you personally over the phone. With us, you will meet knowledgeable people who will treat you as equals and take time to deal with your concerns. Godpfx Ajtzn Naeacjkc Does this appliance not meet your requirements? Discover our entire range of forklift trucks here in the store. Do you have any questions about this product? Please feel free to contact us. Call us on 0461 / 90 93 374 or send us an e-mail to companyshop

Condition: refurbished (used), Year of construction: 2017, operating hours: 4,174 h, load capacity: 2,000 kg, lifting height: 4,625,000 mm, fuel type: electric, mast type: triplex, Equipment: additional headlights, head guard, lighting, pallet forks, sideshift, Top used equipment - new UVV - fully reconditioned | buy or rent | please contact us! Gkjdpfotzp Nzsx Aacsc The LINDE E 20 PH-02 used forklift truck from 2017 is completely refurbished and reconditioned. The LINDE E 20 PH-02 lifts up to 2000 kg to 4625 mm with a TRIPLEX mast. We last read 4171 hours. Our devices are carefully selected and refurbished. See our electric forklift truck for yourself and watch the video: Feel free to compare our equipment with competitor products! You won't find anything comparable in a hurry. We have not only carefully selected and refurbished these devices, but also offer you a competent service (3 master craftsmen, 2 technicians, 10 service technicians, 90 years of industry expertise) and spare parts supply. As a rule, we have every part in stock and have known every trick in the book for decades. If you have any questions or problems, we can also help you personally over the phone. With us, you will meet knowledgeable people who will treat you as equals and take time to deal with your concerns. Does this appliance not meet your requirements? Discover our entire range of forklift trucks here in the store. Do you have any questions about this product? Please feel free to contact us. Call us on 0461 / 90 93 374 or send us an e-mail to companyshop