Angular Beam Panel Saws

SCHELLING AH 8

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels Bdedpfx Ajxvc N Docvsa With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Construction year 2011 We can offer you this robot overhauled too! Bodpfxjim Si As Acveda

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm Bsdpfsxvc Rzox Acvsda N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. Bdedpfxjdfgg Ie Acvea B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles Bdsdpfxorigxyj Acvsa feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Bjdpjh E Sghofx Acveda Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Bodpfx Acsi E Trpjvsda

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Bsdpfsukhd Aex Acveda Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Bodpfxjq Rb Iro Acvsda

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Bdjdpfx Aoxy Tmnscvja