Radial Drilling Machine

SALTEC Z3050 x 16/2

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Gjdjtyyn Hopfx Ag Rebg

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Gbjdorthkuepfx Ag Reg Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Year of construction: 1989, condition: used, cutting diameter 420 mm saw band length 6300 mm table height 700 mm 0 5,5 kW cutting speed 20-130 m/min min. cut-off length 6 mm min. dia. 10 mm weight of the machine ca. 2,9 t Gbsdpfsrc I H Ejx Ag Rjg dimensions of the machine ca. 2,4x3,3x2,4 m Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Gjdpfx Agexftqdo Rsbg Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm - blade length approx. 250 mm - Profile steel shear cuts angles - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm - square steel 90° up to 30 mm - Notching device sheets up to 8 mm - Hole punching machine - pressure capacity approx. 50 t - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg Godjg Eubnopfx Ag Rjbg

Condition: used, Year of construction: 1994, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Gbodpov Rpf Ssfx Ag Rog Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gbedpfsh Nypfox Ag Rjg

Condition: used, Year of construction: 2009, functionality: fully functional, Info: 9m Chamber Length x 3m (approx) Dia, Touch Screen Operators Control Panel, Rated Current 1100A, Control Voltage 24v, 230v/50hz, Service Voltage 400v, 2 x Honeywell Digital temp Controllers, Honeywell Digital Pressure Controller, Honeywell Gjdpewintkefx Ag Rjbg

Condition: ready for operation (used), Wide Planer Gbsdpfx Aewg S Tvog Rog

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, overall weight: 22,800 kg, pressing force: 250 t, CNC press brake Manufacturer: Weinbrenner Type: GP250 Machine specification:- Crowning Gedpjr Sxq Rsfx Ag Rebg -Matrix displacement -Rear stop type 2 -Front bending aid (removed for transportation) -DNC 900PS control unit All documentation for the machine is available.