Joinery

SAFO

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers Kdsdpfxoyab Rvo Ag Uog - 7 pneumatic hold-downs - Additional bushings included - Additional knives included - Operating pressure: 6 bar - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm - Weight: ~4000kg Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood Ksdpfxjtwz Tlo Ag Usdg 1 pc. Machine stand

Condition: excellent (used), Catalogue number 7861 TECHNICAL DATA - Workpiece length: 2500 mm Kdsdpfjx U Tnqjx Ag Ueg - Workpiece width: 800 mm - Main motor approx. 4 kW - Grinding belt width: 170 mm - 2 speed settings - Extraction port diameter: 2x120 mm - Overall dimensions (L/W/H): 3640x1220x1500 mm - Weight approx. 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Used sander, in very good condition Net price: 6900 PLN Net price: 1640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7661 TECHNICAL DATA - max machining diameter range: 140 mm - min input material length: 900 mm - machining allowance (on diameter): max 30 mm - cutter head drive motor: 15 kW - stepless feed speed adjustment via inverter - feed motor approx. 2.2 kW - pneumatic cylinders: 2 pcs - knife setting tool included Kedpfjwnnkmex Ag Ujdg - additional bushings in the set: 80, 100, 130 mm - mounted bushing diameter: 70 mm In order: - infeed chute - 4 gear-driven feed rollers (first two pneumatically adjustable) - 3-knife cutter head - 3 smooth outfeed feed rollers - dimensions (LxWxH): 4500x850x1800 mm - weight approx. 3000 kg ADVANTAGES – 2 pneumatic cylinders – knife setting tool – additional bushings included – used rounder/turning machine – very good condition Net price: 43,900 PLN Net price: 10,450 EUR based on a 4.2 exchange rate (Prices may change with significant rate fluctuations)

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Kedspfatpspfx Ag Uodg Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: excellent (used), Catalogue No.: 7810 TECHNICAL DATA Kdjdpfx Ajxwykbog Usg max working width: 630 mm max working height: 110 mm 2 units: 1) grooved rubber roller for calibration 2) grooved rubber roller for calibration + pad + metal roller *from above: metal feed-in slip roller unit metal slip roller unit metal slip roller *from below: 2 metal slip rollers feed belt 2 metal slip rollers pneumatic belt oscillation 2 feed speeds motor: 2×7.5 kW electric table elevation operating pressure: 6-8 bar extraction port diameter: 2x160 mm overall dimensions (L/W/H): 1650x1060x1970 mm weight: 972 kg – Polish manufacture – 2 units – unpainted – very good condition – used sander Net price: 25,900 PLN Net price: 6,160 EUR (at exchange rate 4.2 EUR) (Prices may fluctuate with significant currency changes)

Condition: excellent (used), The DNDA type pointer–chamfering machine is designed for forming conical points or chamfering the ends of shafts, rods, and stakes. Feeding and rotation of the workpiece are performed manually. Min. length of workpieces: 700 mm Disc rotational speed: 1060 rpm Kdsdpfxex E Eh Rj Ag Usg Number of cutting knives: 6 pcs Motor: 4 kW Extractor nozzle diameter: Ø 160 mm Required air flow for chip extraction: 850 m3/h Table height above floor: 730 mm Overall dimensions: Length: 960 mm, Width: 880 mm, Height: 1300 mm Weight: 280 kg

Condition: new, Year of construction: 2025, Another machine immediately available! Kdedpsv Rpxlsfx Ag Ueg Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: excellent (used), designed for the production of half-rounds /roll borders/ from waste wood, e.g., wood offcuts. Kdedpfjxz Ui Tsx Ag Ueg max material height: 31 mm max material width: 62 mm

Condition: excellent (used), max diameter of machined parts: 140 mm min diameter of machined parts: 40 mm 2-knife cutterhead Kjdpfxew Twkrs Ag Uodg any length of machined parts motor: 2.2 kW extraction port diameter: 120 mm dimensions (L/W/H): 950x520x1100 mm weight: 95 kg

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Kdjdpfxjdx R D De Ag Usg Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 - DTR - CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - 4-knife head - 3 smooth pulling output rollers Kdodpfsv N Edbsx Ag Ujg - dimensions L/W/H: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE Kedpov N Ebajfx Ag Uodg TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Kodpfx Agovvkqgs Uodg Storage location: Nattheim

Condition: like new (used), Debarker with hydraulic infeed Kdjdporwwxajfx Ag Usg