Welding Unit

REHM Pro 240 DC

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA and electric welding hand Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V Csdpfeu U Ihzsx Afljha 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Gas-cooled torch head with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Ground clamp and ground cable 3.3 meters *

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Chjdpfx Aomk S Sloflea Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: new, Year of construction: 2025, We are a production company that is constantly developing dynamically thanks to the professionalism and commitment of our employees. Thanks to the experience we have gained, we are able to offer the best and highest quality solutions in the field of production. The folding bench ZGR - 4140 mm 0.8 mm incl. Roller shears and hand folding machine Chedpfx Afjch Tkvolja - Working length: 4140 mm - bending capacity: up to 0.8 mm (sheet steel) - Bending angle: max. 150 degrees - Folding beam thickness: 30 mm - Upper beam stroke: 80 mm - Weight: approx. 1000 kg - Lifting the top beam in three positions Furnishing: - Roller shear 0.8 + 350 Euro - Degree scale - Angle stop - rear frame to hold the sheet - hand folding machine Price: 6 550 euros Please contact us if you are interested.

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Cjdpfx Afew Rm Sajloha Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical Csdpjt Hwfnjfx Afloha - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Chjdsuhnwvopfx Aflja

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Codpfx Aot Awm Dofljha Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. Cjdjhmfctjpfx Afloha We deliver and install throughout the EU.

Year of construction: 2000, condition: used, TIG welding machine, DC, 380 volts, for stainless steel. Arkoquad 220, 40% duty cycle at 220 amps, 10% duty cycle at 140 amps, with torch. Cedpfx Aogt Auuefleha Ground cable, pressure reducer, water cooling.

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t Chedpfx Aslp Uz Rsflja dimensions of the machine ca. 1800x1800x4200 m