Used Scm Method K for sale (581)

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Nwedpfexq Apgox Aa Esr

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Njdpfxsxlqnte Aa Ejwr Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: Nwjdpfewb Ha Tox Aa Esr – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Nwsdpfx Aovkdtwsa Eer Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Weight kg 1780

Condition: not inspected (used), Year of construction: 1997, SCM Compact 23 Moulder Nodpjwc A R Dofx Aa Ejwr Description Spindle sequence bottom-right-left-top Infeed table length 2500mm Max. Working width 230mm Max. Working height 120mm Feed speed 6-12 mtr / min Spindle speed 6,000 rpm 400Volt 50Hz CE (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2022, Used edge banding machine - OLIMPIC K 360 R - Year of manufacture: 2022 - Available from November 2025 - additional photos/video available Njdpsxhc Evjfx Aa Eswr

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical specifications: Gluing max. 8-55 mm Including rotating control panel Dual-motor HF joining unit Including replaceable, Teflon-coated rapid heating tank Including electronically controlled positioning of the pressure rollers Including pivoting double cross-cut saw unit Including flush trimming unit Nwodpew Nadgofx Aa Ejr Including application-controlled bevel, radius, and corner rounding unit with nesting package Including radius scraper with nesting package Including flat scraper Including grooving unit Including buffing unit Including spray unit Location: Hesse Availability: Upon request !Sold on behalf of customers!

Condition: good (used), Year of construction: 1993, functionality: fully functional, SCM D 80 K double tenoning machine, year 1993, hood on the left. Available for viewing at our premises. Machine price includes loading onto truck. Nwsdpfew Avh Nex Aa Ejr Installation and commissioning at your workshop available at extra cost.

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group Njdstxtzkjpfx Aa Eewr

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of ​​glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Min. / max. thickness of the part mm 8 - 45 (60mm opc. Nsdpfxow Sw Tke Aa Ejwr Motor power kW 2 x 1.5 Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

Condition: excellent (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: AA2/0001518, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 2, number of slots in tool magazine: 12, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, SCM Record RD 110NTTVN CNC Machining Centre, Series: AA2/000518 Year 2008. Nsdpfjx Ek Rkox Aa Eewr In very good condition. X=6m, Y=1.2m, Z=300m/m. Currently running software for staircase production. 12 Position Tool Changer with 1 Extra Head. Rail & Pod machine with 8 Rails. Can work in 2 Fields. Front Safety Mats, and Overhead Laser System. Fully tooled up with complete documentation. Overall size: 8m. x 2.4m. x 1850m/m (H) Weight : 5000kg. Can be viewed at: The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Video and Photos available on WhatsApp

Condition: used, What are Presale Items at Second Owner? Nwsdpjx Nigxjfx Aa Eer Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-05 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, SCM Wide Belt Sander dmc sd 60 DMC60 RCS 110 AB /00003689 European safety regulations (CE marking) Voltage 400 V EU Frequency 50 Hz Sanding width: 1100 mm Version "B" for RCS Infeed and outfeed roller table for long workpieces Electronic programming unit "LOGIC SC" "RA" obliquely ribbed steel contact roller – 1st unit 2nd unit sanding pad unit Main motor 15 kW (20 HP) Location: at customer site - immediately available - Nwedpox Nrwmsfx Aa Eor

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, Nsdpew Nv Nfjfx Aa Eswr right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm

Condition: used, machine/vehicle number: 007982, Max. panel width: 1000 mm Max. panel length: 2000 mm Nwodpfx Aaew Ic Tus Eor

Year of construction: 2022, condition: new, planing width (mm): 520 planing height (mm): 3 - 250 Nwedjl Axhcjpfx Aa Eer motor power (kW): 9 voltage: 400 volt, 50 Hz minimum workpiece length (mm): 230 maximum chip removal (mm): 6/8 feed speed (m/min): 5-8-12-18 table length (mm): 2310

Condition: excellent (used), Year of construction: 2004, functionality: not functional, machine/vehicle number: AA1/013950, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 3, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SCM Record 132 TVN CNC Machine Centre in very good condition. Fully tooled up and currently running software for staircase production. Rail and Pod Machine with 8 Rails. 10 Position Tool Changer with secondary head and Saw Unit. Can work in 2 fields, Front Safety Mats, Overhead Laser system. Full documentation available. Over all dimensions: 8m. x 2.4m. x 1850m/m (H) Weight About 6000kg. Nwedpfx Ajx Ekxzja Esr Ready packed for shipment. Can be viewed at The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Photos and Video available on WhatsApp

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: No - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1550 - Z-axis working range [mm]: 160 Nwjdpfx Aasx Hwhxo Eor Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, MORBIDELLI M100 CNC Machining Center Working Area X-Y: 3,110 x 1,320 mm Max. workpiece height above suction cups: Z180 mm Technical Data Working range X axis: 3,110 mm * Working range Y axis: 1,320 mm * Panel passage Y: 1,600 mm Panel passage Z: 180 mm Workpiece length for pendulum operation: 1,400 + 1,400 mm Travel speed of X-Y axes: PRO-SPACE: 56 m/min (184 ft/min) Travel speed of X-Y axes: PRO-SPEED: 78 m/min (256 ft/min) PRO-SPACE Safety Devices 1 Enables the machine to be installed without perimeter safety fencing, thereby reducing space requirements. The safety devices are mounted directly to the machine frame. Max. X-axis speed = 25 m/min. 63.03.73 "TECPAD wired" remote control with 7" touchscreen display Tool Changer TRB11 (configuration Y=1,320) Tool Changer FAST14 1 vacuum pump, capacity 250/300 m³/h at 50/60 Hz F31LTC drilling unit The F31LTC drilling head is equipped as follows: Connection for vertical and horizontal drills Ø 10 mm, WELDON type (max drill length = 70 mm) Distance between spindles: 32 mm 21 vertical spindles, selectable independently 5 horizontal drill heads with dual output (one on each side), 3 in X direction and 2 in Y direction Drill spindle speed: 4,500 rpm (with optional inverter 2,500–8,000 rpm) 1 integrated saw blade in X direction (max diameter 125 mm, thickness 2.2–6 mm) Saw blade speed: 5,500 rpm Drilling unit with inverter Pressure booster on the Z-axis 5-axis unit, version "JQX" 10 kW The 5-axis unit includes: HSK 63F tool holder with double reference surface for rigid connection between taper and electrospindle Standard electronic control of rotation speed from 1,800 to 24,000 rpm, with static inverter and quick stop function Continuous power (S1/S6): 8.5/10 kW (11.5/13.6 HP) from 12,000 rpm B-axis rotation: ± 185° B-axis rotation speed: 7,000°/min C-axis rotation: ± 320° C-axis rotation speed: 7,000°/min Right- and left-hand rotation programmable via NC Internal air blast to ensure optimal tool holder coupling Cooling system with circulating fluid and external heat exchanger Ceramic ball bearings on main spindle Internal pressurized air circuit to prevent contamination by dust Surrounding extraction hood for chip removal with pneumatic ON/OFF function Extraction hood for 5-axis electrospindle 6 "TV FLEX" worktables 1,300 Chip and waste conveyor belt for X=3,110 mm 4 loading aid devices H=75 1,300 Front stops H=75 for 6 supports Main front reference stop Vacuum suction cups 145x145 mm, H=75 mm – 12 pcs Vacuum suction cups 145x55 mm, H=75 mm, rotatable – 6 pcs Additional hardware dongle for Maestro CNC (for USB port) High-performance PC Nedpfxsx Nrwgo Aa Ejwr Location: ex works customer site - Immediately available - System must be dismantled by the seller

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Nodpfoxm R Uvox Aa Eswr Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. Nwedpfxex Nbzus Aa Eer - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: ready for operation (used), Year of construction: 2018, Main Drive Njdjx Nr Sdopfx Aa Eswr Spindle motor power 11 kW This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Application Types Sanding

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of tool changer positions: 32 Nodpfox A Tc Iex Aa Eowr

Condition: used, Year of construction: 2006, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-05-25 - Year: 2006 Njdpfex Hfikex Aa Eswr - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor, Manual control - Table length [mm]: 3050 - Table width [mm]: 1240 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Nwedpfx Ajw Idbyoa Eor Position 5: Ovens SCM-BRAVOROBOT P1