Center Lathe

PINACHO SC 200-42-1000

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Kdedoxq Eyuspfx Akpou

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Kodpfoyg I Nfsx Akpsdu Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: used, Modular milling cutter Kdedpfx Aedklt Nskpou Module 8 20 degrees Length 1800 mm Diameter 120 mm Inner diameter 40 mm

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis Kdedswpud Ajpfx Akpju 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Kjdpfevzn Itjx Akpjdu Spindle bore: Spindle mount: Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions. Kodpfxjxlngae Akpodu

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Kjdpfx Aksuz If Nepodu - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, power 2,2 (3,0) kW (PS) Kjdpfxsb I Sx Ee Akpsdu electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 735 mm width 1 466 mm height 1 290 mm insertion resp. discharge height 850 mm weight 350 kg material 1.4301 / AISI 304 lifting force up to 550 kg / bin rotation time 15 sec fruit discharge height 900 mm fruit discharge width 500 mm suitable for standard bulk bins 1 000 x 1 200 x 970 mm scope of delivery hydraulic power unit

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Bar passage: 62 mm Main motor power: 5.5 HP Kodpfx Akjy N T R Iepodu Steadies included

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED Kdodpfeyuqacjx Akpsu ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION