ECOGLASS OPTICAL SORTER EGF-1500

PICVISA ECOGLASS OPTICAL SORTER EGF-1500

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Kodpfx Ajvwlqqsa Eenf Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2008, condition: excellent (used), 4x Machines available Length 1150 mm Width 530 mm Kedpfx Aomf Tk Aea Eonf

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Kedpfx Aasv S Hyvs Ejnf Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: like new (used), Year of construction: 2023, operating hours: 95 h, functionality: fully functional, total width: 2,950 mm, total length: 6,200 mm, total height: 4,530 mm, overall weight: 6,200 kg, belt width: 1,500 mm, fuel: electricity, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, transport height: 2,350 mm, transport length: 6,030 mm, transport width: 2,250 mm, Equipment: documentation/manual, Westeria mobile air separator type AirLift move for the separation of heavy and light materials. Typical applications in the recycling / waste management industry, for example for separating film from compost (fine or coarse grain) and mixed construction waste. Throughput capacity between 100-150 m³/h depending on material properties Working width: 1500 Color: RAL 3020 C3M RAL 7040 Ksdpfjvrcigox Aa Esnf Including - DiscSpreader for optimum material distribution in the separator process - Pipe for blowing the lightweight material into on-site containers

Condition: used, Year of construction: 2012, power: 264 kW (358.94 HP), Stationary shredder M&J 4000S. Electric drive: 2x 132 kW 400 V AC, 50 Hz Inkl. substructure, hydraulic unit, control cabinet. Kedpfou Dkf Dex Aa Ejnf

Condition: good (used), Screen area: approx. 1,300 x 4,000 mm new semi-mobile steel construction Kedpotpgvxefx Aa Ejnf

Condition: as good as new (ex-display), Year of construction: 2024, Set of shredding shafts manufactured NEW. These shafts are available with different knife configurations, the following are currently possible: Size 450 / 650 / 750 / 850 / 950 Kodpjivpkyefx Aa Esnf 5 / 6 / 7 / 8 / 9 / 10 knives possible 7 / 8 / 9 disks arivable for machine type VB-750 / VZ-750 / U-75 / HPS-1.5 / Pronar 2.8 / Inmpaktor 250 .. 300 / Titan ... We are also happy to meet your wishes. Please state your company address and contact details when making enquiries. This way we can prepare a quote and send it to your personal email.

Condition: good (used), functionality: fully functional, Conveyor belt length: approx. 28 m Discharge height: approx. 10 m Feed hopper capacity: approx. 10 m³ with adjustable dosing conveyor belt 2 transport conveyor belts (one flexible) on a 3-axle chassis Knedjv Scaxjpfx Aa Eef Powered by an ENDRESS 45 kVA generator

Condition: ready for operation (used), Drum Screen Terra Select plus feeding conveyors Kedpfsvnmcvox Aa Esnf

Condition: excellent (used), functionality: fully functional, container length: 6.06 ft, Witam, Przedmiotem aukcji są używane kontenery niemieckiej produkcji w bardzo dobrym stanie. Kontener o wymiarach 6m x 2,44m. Możliwość składania modułów w większe pomieszczenia. Posiadam bardzo dużą ilość! Dostępne od ręki! Kjdpju Ttfcsfx Aa Ejnf Za dodatkową opłatą możliwy transport do klienta. Cena export / dla firm za sztukę