CNC Lathe

BUFFALO MACHINEY BNC-22120

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW Lasdpjvwgpbefx An Uob weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA Laodpfotv H Ucsx An Ueb weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 820 mm, turning length: 6,000 mm, GURUTZPE lathe model Super A, 6,000 mm between centers, swing on bed 820 mm, on carriage 550 mm, in the neckline 1150 mm, diameter of the shank 82 mm, motorized carriage, 16 speeds of 9-500 rpm, has 3 steadys . Lajdpov Rm Iwjfx An Ujb

Condition: good (used), Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available Laedpofc T Tqofx An Ueb -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, Equipment: chip conveyor, rotational speed infinitely variable, DMU 75 monoBLOCK Year of manufacture: 2018 Control: Heidenhain TNC 640 Celos Axes: 5 simultaneous Main spindle Model: Speedmaster Speed: 20 – 20,000 rpm Tool changer Type: Chain magazine with double gripper Positions: 60 Travel distances X: 750 mm Y: 650 mm Z: 560 mm Ljdsy St Swepfx An Ujab Equipment Oil mist extraction Rinsing gun Operating mode 4 Electronic handwheel IKZ 40 bar with belt and cartridge filter 3D measuring probe Chip conveyor

Condition: used, Year of construction: 2016, machine/vehicle number: 127300000073, total height: 4,500 mm, total length: 9,000 mm, total width: 6,500 mm, overall weight: 46,000 kg, DMG MORI DMU 210 P Universal Machining Center in heavy-duty duoBLOCK design for 5-axis positioning and simultaneous machining.The machine features a Heidenhain TNC 640 3D control system and a large working area of X 2,100 mm / Y 2,100 mm / Z 1,250 mm.The machining center is equipped with a continuously positioning universal milling head with a controlled B-axis and an integrated motor spindle. The swivel range extends from the horizontal position to a maximum of 250°. Additionally, the machine is equipped with an NC rotary table Ø 1,700 mm with direct path measurement system and 360° positioning. The permissible table load is approximately 8,000 kg.The SK50 motor spindle reaches speeds from 20 – 12,000 rpm with a power output of 52 kW / 42 kW and a torque of up to 430 Nm.Tool magazine as a wheel magazine with 63 tool positions and double gripper.Equipment includes, among others:IKZ high-pressure system 80 bar, frequency controlledBlow air through spindle centerBlum Laser NT Hybrid tool measurementM&H infrared measuring probe3D quickSET expansion packageACC active chatter suppressionMPC Machine Protection ControlApplication Tuning Cycle ATCOil and emulsion mist separatorFull protective cabinChip conveyor4-color signal lampVirtual axis for TNC640RMS Relocation Machine SecurityMachine design for installation in a pit (depth approx. 780 mm).Feed rates up to 60,000 mm/min and rapid traverses up to 60 / 40 / 40 m/min.Machine from industrial use with extensive equipment for demanding applications in tool, mold, and mechanical engineering.Control ON: 47,888 h - Operating hours: 21,228 h 5-axis machining: Yes Travel Z-axis: 1250 - mm Travel X-axis: 2100 - mm NC rotary table: Yes Dimensions (LxWxH) approx.: 9000 x 6500 x 4500 mm Weight approx.: 46,000 kg Serial number: 12730000073 Travel Y-axis: 2100 - mm Year of construction: 2,016 Lodjyxmicepfx An Usab Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Lodpsv I T Ewjfx An Ujab Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm Lsdpfxogbfaxs An Ujab

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The used, FULLY REFURBISHED self-learning CNC lathe GEMINIS GHT4 720X3000 is a robust, medium-large parallel bed lathe equipped with FAGOR 8055 CNC, center height 360 mm, distance between centers 3000 mm, spindle bore 106 mm. Ljdpfx Anjxdvbcj Uoab The machine is COMPLETELY REFURBISHED AS NEW, including bed grinding, carriage grinding, Turcite overlays, spindle bearings, axis bearings, axis screws, electrical system, motor overhaul, new drives, new FAGOR keyboard, etc. The equipment is completed with prearrangement for automatic turret, manual self-centering chuck, and 2 steadies.

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Parts shown by hand not come. Lsdpfx Aewybg Sen Usab Technical details shown on pictures.