Edge banding machine

Ott Tornado

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l Bwsdpfx Aslc Ewijfnsh CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Bwodjdx Daaopfx Afneh Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW Bwjdpexdpm Sjfx Afnsh - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Bjdogmn H Aepfx Afnowh

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Configuration: 1 pc. milling spindle 5,0 KW 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Bwedevx Dz Djpfx Afneh Total area covered: 2900 x 1650 mm Total weight: 950 kg. With full documentation and CE. Very good condition. Available immediately.

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees Bwedpjrhilxefx Afnsh • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Bsdpjxyiiljfx Afnjwh

Condition: new, Year of construction: 2025, CNC MILLING MACHINE C2131 IND (working area 2100 x 3100 mm) dynamic and precise milling plotter based on components from global manufacturers equipped, among others, with spindle of Italian production HSD. Work table Sectional table with six independent vacuum sections, made of rigid and resistant HPL panels, controlled directly from the control cabinet, Each section has holes into which the vacuum from the vacuum pump is fed via a system of tubes, The main openings in the vacuum table have plugs to accommodate different material formats, Table equipped with buffers in two axes! Pneumatic positioners to ensure that the material is always positioned in the same place, Spindle High-quality brushless spindle from a renowned manufacturer, 9 kW, powered by inverter, with overload protection . Milling electro-spindle with innovative AIR cooling system. 3.Drive Energy-efficient YASKAWA high-performance AC servo drives, controlled by a digital controller, provide excellent machining quality while maintaining high operating speeds in each direction, Brushless AC servo motors driving the X, Y axes transfer the drive via high-performance planetary gears The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The door is moved along the X and Y axes by HIWIN guide rails and bevel gears, which guarantee many years of trouble-free operation, and are made of high-quality hardened and tempered steel. Construction The rigid table structure , made of ribbed steel, excludes vibrations during the production process. 5 Tool magazine and tool measuring sensor The machine is equipped with a 12-position linear tool magazine, a set of ISO30 cones and ER32 bushings. Toolholders included: ISO30 and toolholder sleeves of size: 1/2’ - 6 pcs; 1/8’ - 2 pcs; 3-4mm - 2 pcs; 5-6mm - 4 pcs; 7-8mm - 2 pcs; 9-10mm - 2 pcs. 6 Software, INDUSTRIAL CONTROL: The machine is controlled by a SYNTEC industrial controller as in large machining centres. Included with the controller: keypad and LCD display. Optional latest software UCanCAM V12 Vacuum pump (optional) and extraction foot. The use of a vacuum pump significantly increases the clamping force of the workpieces on the machine table, so that the material does not move. The extraction foot is penumatic, located at the spindle, and allows the connection of any chip extractor, keeping the machining clean, safe and at the same time maintaining the precision of the work Technical specifications Working area 2100x3100 mm Z axis 300 mm Structure Arm in cast iron / table in welded steel Drives hybrid servo motors (AC LEADSHINE) 1500W Hybrid table Spindle power 9 kW Shimpo gearbox Spindle speed 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Repositioning accuracy 0.01 mm Linear bearing trapezoidal rails, Hiwin carriages Material clamping vacuum, hybrid Vacuum pump (optional) 7.5 kW, 8 independent vacuum sections Bwedpfx Afevup Unonoh Software (optional) UCanCAM V12

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3750, Machine glues solid wood up to 18.0mm and roll goods up to 3.0mm Cutting from the roll 3.0mm thick PVC, ABS, and real wood up to 2.0mm Bwedpjigad Eofx Afnjh Flush chamfering 18mm Rounding and chamfer milling stations Total length 3.20m Power consumption 7.1 kW Glue container Cutting shears Infinitely variable feed Cutting saw for front and rear edge Flush milling unit Rounding milling unit Chassis Extraction connection 100 mm

Year of construction: 2023, condition: new, machine/vehicle number: 23-04-35-001, F 25 version 3 Manual height and tilt adjustment 0 - 46° of the saw blade with digital display. Motor 5,5 kW, 2 speeds 3.600 / 4.200 rpm. Double roller carriage 3200 mm, rip fence incl. fine adjustment and DIGIT X (digital display of the cutting width) Cutting width 1000 mm, Angle miter fence, cutting to length up to 3450 mm, scoring unit Basicwith LED light Saw blade diameter max 315 mm, saw blade projection max 104 mm, Cutting height max 100 mm, at 45° max 70 mm, Bwedef A Ehtjpfx Afnjh large suction hood (PSV), incl. option front support roller, immediately available from stock Seevetal, subject to prior sale without transport, assembly and instruction