Wide belt sander

Ott MEGAtronic 11 Lack

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Lodoychqzopfx Aigsrr Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet Lrsdev Sq S Nspfx Aigor • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: new, Table dimensions 2500x 780 mm Motor output 7,5 kW Spindle diameter nach Bedarf mm Lredoxpi D Ispfx Aigor reus 1.500 - 10.000 U/min

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Lrsdpfovvku Ejx Aigjr

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Lrjdpfxoddmq Tj Aiger Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Lredpfxoy Tm Rps Aigor - Spare milling spindle: included

Condition: excellent (used), functionality: fully functional, working width: 950 mm, Calibrating/sanding machine "SCM" model SANDYA 3S CODE: CAL-055 USED MACHINE - V380/50 - "CE" ▸Working width: 950 mm ▸1st unit: steel roller ▸2nd combined unit: rubber roller / timed, sectional pneumatic pad ▸Additional rigid pad ▸Pneumatic exclusion of the rollers from the frame ▸2 conveyor belt speeds ▸Automatic table positioning Lrjdpfey Tlxrjx Aiger ▸Roller conveyor with 2 idler rollers at the inlet/outlet ▸Motor power: 7.5 kW

Condition: good (used), Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: Ljdpfocn Am Ijx Aigsrr -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Condition: new, Year of construction: 2026, Table size: 3000 mm x 1400 mm Operating vacuum: -0.9 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating system temperature: max. 140 °C Heating power: 24 kW Machine length: 3100 mm Machine width: 1750 mm Machine height: 2200 mm Weight: 950 kg Lrjdpfx Aievzbbyegor

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Lodpfoytgn Tjx Aigorr