Welding smoke suction

OSTERBERGER SKAW

Condition: new, capacity 90 degrees: round 125 mm capacity 90 degrees: square 125 mm 127 x 125 mm dimensions of saw-band 1435 x 12,7 x 0,65 mm band speed 38 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg dimensions 720 x 380 x 450 m Both straight and miter cuts can be made at angles between 45 and 90 degrees. With the metal band saw you not only work precisely, but also quickly: the band speed can be variably adjusted between 38 and 80 meters per minute. With a weight of only 25 kilograms, the saw can be used mobile. Kljdpfjupw R Nox Amrju

Condition: new, table length 1200 mm table width 1200 mm table height 840 - 890 mm weight of the machine ca. 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Kledspk Iv Uepfx Amrju Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: used, Year of construction: 2019, Electrically heated rapid steam generator. The water level in the feed water tank is regulated by a float. A pump transports the feed water into the boiler, where the water level is regulated by an electronic control system. When a certain water level is reached, the resistance heating elements switch on automatically. The heating output can be adjusted in three stages on the housing. Additional title: electrically heated steam supply Saturated steam capacity: 82 kg/h Heating output 1-, 2- or 3-stage: 20+20+20 kW Heating area: 0,566 m2 Mox. operating pressure: 8 bar Power: 60 kW Current: 86.6 A Voltage: 400 V Kljdpfexf D Igjx Amrsu Frequency: 50 Hz Length: 1074 mm Width: 770 mm Height: 956 mm Weight: 340 kg Base construction: auf Füßen stehend, in Gehäuse Features: electric resistance heating; feed water vessel and desludging tank in the housing

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Kljded Anz Rjpfx Amrou Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust

Condition: excellent (used), Year of construction: 2014, operating hours: 10,000 h, pressure: 10 bar, operating pressure: 10 bar, For sale: Certuss steam generator with gas burner. The unit is in very good condition. Only 10,000 operating hours. Model Junior 120, year of manufacture 2014. Steam output 120 kg/h. Maximum steam pressure 10 bar. Delivery available for an additional charge. Inspection on site possible. Please contact us with any questions. Kledpfxoyhrp Es Amreu

Condition: used, Year of construction: 2007, Technical details: Kljdpox Aq Hwjfx Amreu turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Ksdjwra S Rjpfx Amrjlu Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Ksdpfxobrante Amrslu Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Year of construction: 2009, condition: new, Belt dimensions: 2000x100 mm Klodpfx Aox Davjmrsu Belt speed: 30 m/s Angle adjustable from 30 to 90° Power: 3 kW, 4000 V, 50 Hz Weight: 200 kg Rollers for grinding reamers: 3/4"; 1/2"; 1"; 1 1/4"

Condition: used, Year of construction: 2003, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, CNC wire EDM machine Fanuc, type Robocut Alpha O I B, year of manufacture 2003. Travel of XY axes: 320 x 220 mm. Travel of UV axes: plus/minus 60 mm. Z-axis adjustment: 180 mm. Clamping area: 530 x 360 mm. Maximum workpiece height: 180 mm. Internal space: 70 x 430 mm. Maximum workpiece weight: 500 kg. Kjdsyankpepfx Amrslu