COMPACT VIBRATING SCREENER PP50

OPTION

Condition: new, Year of construction: 2026, EK01 BAGGING MACHINE: Semi-automatic multi-product bagging station EK01 equipped with a large loading hopper and precision scale adjustable to the desired weight. Automatic weighing system with internal conveyor belt. Medium-wide mouth hopper for easy filling of bulk material Specifications bagging machine with hopper EK01: - Bagging capacity 1,5-2 tons / hour -Productivity (2.5 bags per minute depending on the material, the size of the bags and the skill of the operator) Godjd Nrh Ajpfx Afksbn - Hopper capacity 1.6 m³ -Overall dimensions L 130cm x W 250cm x H 225cm * (during construction you can opt for a lower hopper) - Support base on four legs with dimensions of 100cm x 100cm - Total weight is about 350 Kg - Precision weighing +/- 100 grams - Programmable scale at the desired weight - Possibility to prepare bags from 1 to 50 kg (according to your needs) - Possibility of adjusting the feed speed of the unloading belt by means of a potentiometer, final filling phase at decreasing speed to increase weighing accuracy - EC declaration of conformity

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Construction year 2011 We can offer you this robot overhauled too! Gjdpfx Afeim Si Aoksbn

Year of construction: 2026, condition: new, - Sifts material into 2 or 3 fractions (one or two sieving grids) - Mesh with hole diameter according to your choice - Yield from 10 t/h to 15 t/h (depending on the material) - Possibility of loading hopper with capacity 2m³ dimensions 260 cm x 180 cm - Equipped with a professional electro-vibrator, allows continuous operation. - Precise and fast sieving - Adjustable vibration power by moving the rotating masses of the vibrator - Very low maintenance costs - inclination according to your needs - Grid dimensions 100cm x 200cm - Control unit Godpofxa U Uofx Afkjbn - User manuals - CE conformity and marking - Three-phase operation 380V - Made in EU

Condition: new, Year of construction: 2026, type of input current: three-phase, Semi-automatic Bagging Machine with 5 m³ Hopper – 1-50 kg Bags / 1500 kg Big Bags Gjded Nqmlepfx Afksbn Semi-automatic industrial bagging station with large-capacity hopper and dual weighing system, designed for dosing and packaging bulk materials into small bags and Big-Bags. The machine is particularly suitable for agricultural operations, fertilizers, feed, chemicals, minerals, pellets, granules, and powders. Thanks to its two independent scales, simultaneous filling of both small bags and Big Bags is possible, significantly improving the productivity of the packaging line. Product is extracted from the wide-mouth 5 m³ hopper via two independent belt conveyors with gearmotors, featuring continuous throughput adjustment to ensure high accuracy and dosing control. The robust frame is engineered for industrial use and is equipped with side and rear forklift attachments, enabling easy and quick handling within the facility. Key advantages - Dual independent weighing for increased productivity - Simultaneous filling of small bags and Big Bags - High weighing accuracy: ±100 g - 5 m³ hopper allow filling with mechanical shovel - Continuous material flow adjustment - Suitable for a wide range of granular and powder products - Easily moved with a forklift - Complete, ready-to-use system with bag sealer and roller conveyor Applications - Fertilizer packaging - Animal feed and agricultural products - Plastic granules - Minerals and sands - Industrial powders - Pellets and bulk materials Technical data Model: ARK03 Type: Semi-automatic bagging machine with hopper Hopper capacity: 5 m³ (full) Hopper dimensions: 3000 × 2000 mm Machine dimensions: 5000 × 2100 × 2350 mm (L × W × H) Weight: approx. 700 kg Weighing accuracy: ±100 g Packaging formats - Small bags: 1 – 50 kg - Big Bags: up to 1500 kg - Supported Big Bag heights: 100 cm / 150 cm Feeding system - 2 independent belt conveyors with gearmotors - Continuous material flow adjustment Equipment included - Adjustable-platform bag sealer - Support roller conveyor - Control panel - User manual Power supply and certifications Power supply: 400 V – 5P – 16 A CE marked Manufactured in the EU ✔ The ideal solution for industrial bagging lines requiring precision, versatility, and the ability to handle both small bags and Big Bags with a single system.

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. * Built-in raiser plate approx. 100 mm to increase height of shaper head. Gbjdpfet Hww Djx Afkjn * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: new, Year of construction: 2026, Semiautomatic multi-product filling station equipped with precision balance. The operator positions the empty bag under the bag-holder and the bagging machine fills it quickly and with maximum precision thanks to the automatic weighing system. The product is extracted from the hopper via a conveyor belt driven by a gear reducer. Wide mouth hopper for easy filling with mechanical shovel or other system. Side and rear couplings for forklift forks to facilitate transport.       Specification bagging machine with hopper ARK01: - Bagging capacity 3-4 tons / hour - Hopper capacity 2 m³ (heaped) - Overall dimensions L 210cm x L 260cm x H 225cm - Total weight is about 400 Kg - Precision weighing +/- 100 grams - Possibility to prepare bags from 1 to 50 kg * -Wiring for power line connection - Manual tilting gate to regulate the quantity in outflow - Vertical tilting scale support to adjust the height based on the bags used Gbjdjd Nqvnjpfx Afkon - Command hospital - 400V three-phase power supply - Instruction manual - Made in EU

Condition: new, Year of construction: 2026, - Yield 3-4 tons/hour - Hopper capacity 2 m³ (heaped) - Overall dimensions L 260cm x L 210cm x H 225cm - Total weight is about 400 Kg - Precision weighing +/- 50 grams - Possibility to prepare bags from 1 to 50 kg *, limit of the weighting scale it's 150Kg Gbodpfof Dq N Eox Afken - Wiring for power line connection - Manual tilting gate to regulate the quantity in outflow - Vertical tilting scale support to adjust the height based on the bags used - Reduction of the discharge mouth (2 outlets, oner for small bags and one for big bags) - Special non-slip rubber conveyor belt - Vibrator under hopper in case of clogging - Agitator inside the hopper - Roller for move the bags - 400V three-phase power supply - Instruction manual - Made in EU

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Electrical height adjustment of the cabin for body-friendly posture. Memory position storage for 3 heights. Dust extraction filter 2000m³/h 2,2kW. Gjdpsga Ehbefx Afkobn

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 with Corrugated Option, fully automatic Resolution: 10 pl - 1000 dpi Color: 6C + (optional White) Very low usage Speed up to 2025 m2/h Gbjdpfx Aoy Amckofken Fully automatic loader (feeder) Fully automatic unloader (stacker) INK: Paper and board with very low odor Options: Corrugated Option with 2 rails for dropping down material Corrugated static bar for different material thicknesses Corrugated software to control media and thickness - Understatic bar and automatic media stop for crash prevention - Caldera Rip Software Demo video is from Durst Rho 750 (28 pl, 600 dpi)

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): Gbodpfxjuzv Tzj Afkon rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Gbjdewxygzepfx Afksn Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.