Band sawmill

Optimat Timberland TMG 790S

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Record Power PT 107 Surface Planer Thicknesser with a planing width of 265 mm. The machine is in its original condition, so you receive the full warranty. Kjdjuv Exiepfx Aa Esfa Technical data: - Planing width: 265 mm - Planer table length: 1,110 mm - Planing depth (surfacing): 3 mm - Planer fence tilts up to 45° - Cutterblock diameter: 75 mm - Speed: 4,000 rpm - Maximum thicknessing height: 190 mm - Thicknesser feed width: 265 mm - Thicknesser feed rate: 5 m/min - Maximum planing depth (thicknesser): 2 mm - Motor: 2.3 HP / 230 V - Power consumption: 2,200 watts - Extraction port: 100 mm - Weight: 162 kg One unit of this planer is available at each location: A-5431 Kuchl and A-8561 Söding, and can be inspected during our business hours at any time. Subject to prior sale! Shipping (by freight): Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT Related terms: surface planer, thicknesser, planer, surfacing, thickness planing Reference: ZXPT107-A

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Kfodpsqx Sxljfx Aa Eea

Condition: new, axle configuration: 2 axles, loading space length: 4,250 mm, loading space width: 2,150 mm, loading space height: 700 mm, loading space volume: 6 m³, color: red, Year of construction: 2025, Carrying capacity: 14.000 kg Kedpjxu N Hyofx Aa Esfa

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz Kfsdpoflmm Ssfx Aa Eja -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg

Condition: used, Small sawmill CTR550, year 2018, good condition, 4 kW, 3600 mm cutting length. Price changes reserved, errors, misprints and typesetting mistakes reserved. Kfsdpfx Aaewzzfqo Eja

Condition: good (used), mileage: 21,404 km, power: 130 kW (176.75 HP), first registration: 07/2019, fuel type: diesel, wheelbase: 2,800 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, differential lock, onboard computer, parking heater, soot filter, traction control, trailer coupling, - Airbags - Rear work lights - Front work lights - Armrest - Audio controls on steering wheel - AUX input - Outside temperature display - Construction site beacon - Device holder - Hill start assist - Leaf spring suspension - Differential lock - Differential lock - Tachometer - EBS (Electronic Braking System) - Electric window lifts - ESP (Electronic Stability Program) - Additional lights - Driver airbag - Driver seat height adjustment - Speed limiter - Tinted glass - Hydraulic system - Tipping hydraulics - Folding exterior mirrors - LED lighting - Center armrest - Multifunction steering wheel - Fog lights - Particle filter - Radio/CD - Rotating beacon - Reversing camera - Full service history - Disc brakes - Power steering - Sun visor - Stability control - Auxiliary heater Kfjdpfx Ajxcgukja Esa - Immobilizer - Tachograph - USB port - Automatic heating - PTO (Power Take-Off) - PTO (Power Take-Off) - Central locking - Towing jaw Very well-maintained Mercedes-Benz Unimog U 218 tipper, 3-seater, 4x4, with only 21,404 km on the odometer and a wide range of options. This Unimog is in good technical and visual condition. For more photos or information, please contact us by email, telephone, or WhatsApp at or . Dimensions L 515 W 250 H 325 FRONT AXLE DIFFERENTIAL LOCK AXLE RATIO I = 6.527 TRAILER BRAKE, 2-LINE SIDE UNDER-RUN PROTECTION REAR MOUNTING BRACKETS MOUNTING PARTS FOR SALT SPREADER ON LOADING PLATFORM FRONT MOUNTING PLATE DIN 76060, TYPE B, SIZE 3 ACTIVATED CARBON FILTER PASSENGER SEAT, DOUBLE SEAT AIR-SUSPENDED DRIVER'S SEAT WITH SEAT HEATING ADDITIONAL LEFT COLUMN SWITCH UNIVERSAL MOUNT, FRONT CONTROL PANEL BATTERY MAIN SWITCH AT BATTERY BOX 24V ABS TRAILER CONNECTION, 7-pin/5-pin 12V trailer socket, 13-pin 24V front socket, 7-pin 12V permanent power socket (C3), 12V and 24V center console 24V / 25A cab socket with C3 signal Reversing camera Additional removable camera for attachments 28V / 150A alternator Camera system monitor Exterior sun visor, transparent Windscreen, transparent, heated Resistor group with working group Automatic transmission (EAS) Transmission protection plate Tipping cylinder Hydraulic 4-way connector rear, 1+2 cells Rear pressure line, 2nd hydraulic circuit Separate rear return line Tipping hydraulics Dual-circuit, three-cell, fully proportional hydraulic system Snow plow blade Implement carrier series Compression class (4–5): 09 U200 Compression class (6): 0 Compression class (7–8): 12 chassis, LEFT-HAND DRIVE Instrument display unit, 12.7 cm, with video function CD radio, Bluetooth Warning light for telescopic bottle AdBlue tank 16 liters Work lights, cab rear wall TOP HEADLIGHT WASHER SYSTEM ENTRY LIGHTS BI-XENON HEADLIGHTS, LED DAYTIME RUNNING LIGHTS LED INDICATORS, YELLOW, LEFT AND RIGHT, WITH MOUNTS ADDITIONAL LED HEADLIGHTS, WITH ROOF BRACKET ADDITIONAL ADJUSTABLE HEADLIGHTS, A-PILLAR ENGINE OM934, L4, 5.1 L, 130 KW (177 HP), 750 NM ENGINE SPEC EURO VI, WITH OBD-C HIGH PERFORMANCE ENGINE BRAKE CLEAN-FIX RADIATOR QUICK-CLEANING SYSTEM...

Condition: used, mileage: 210,000 km, Year of construction: 1981, Serial number: 104xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20686 Specifications: Model Year: 1981 Mileage: Approx. 210,000 km (subject to change) Transmission: Manual Engine Power: 305 hp Drivetrain: 6x2 Length: 795 cm Width: 248 cm Wheelbase: 420 cm Curb Weight: 10,300 kg Tires: See photos for condition Kfodpfxjwqwp Rs Aa Eea Description: Scania 112H conventional truck from 1981 for sale.The truck starts and runs, and the tipper function works as it should.Some maintenance and repairs should be expected Quick delivery available upon agreement. Km: 210000 HK: 305 Technical approved: no EU-approved until: 21.10.2022 Own weight: 10300 Total Weight: 25500 Payload: 15125 Width: 248 Length: 795 Model: 112H Gearbox: Manual

Condition: ready for operation (used), Forklift truck Manufacturer: Jumbo Kfedevtwuaopfx Aa Eoa Type: J60 DC12 Diesel Year of manufacture 1994 Payload: 6,000 kg Own weight: 9,260 kg Lifting height: 4300 mm approx. 25,000 operating hours Sold due to switching to wheel loader All service and lubrication intervals verifiably completed according to the inspection book! All filters (hydraulic, fuel, converter, air) replaced annually. Engine oil filter including oil every 250 operating hours. Only B0 was used as diesel fuel. (no B7) immediately available - fully functional Location: Austria, near St. Pölten

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m Kfsdpewh U Dmofx Aa Esa 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: refurbished (used), Kellenberger internal & external universal cylindrical grinding machine Kfjdpfx Aaewqlyke Eja Kellenberger 1500 U - 175 (internal grinding attachment included) Centre distance: 1500 mm - Centre height: 175 mm Siemens servomotor. Frequency converter internal & external, WSS Available with various accessories. Availability: immediately! Option 1000U: in overhaul process