CNC drilling machine

OMAL Insert 900

Condition: excellent (used), Numerical Control Type Power Control Dwodpfxoivawpj Acyjd Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: used, machine/vehicle number: 007926, Max. working width: 1300 mm Drying system: warm air Dsdsyhbklspfx Acyswd Hot air: yes vertical baskets: yes no. baskets: 48 panels / vertical chambers: yes no. panels / vertical chambers: 2

Condition: excellent (used), Electronic programmer RT 483 Dwjdsfz Nanspfx Acyod No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Max. panel length: 2500 mm Dwjdpfx Acoiwptuoyod No of injectors: 14

Condition: ready for operation (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina drying oven, manufactured in 2007 Dedpfszcnu Hjx Acyowd with three different climate zones: evaporation zone - heating zone - drying zone Mobile pallets with conveyors, therefore no minimum size requirement for components Continuous vertical conveyor system

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) Djdpfx Aow Ug A Hecyewd - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system - Total installed power KW 5 ca.

Condition: used, machine/vehicle number: 008692, Max. panel width: 3000 mm Max. panel length: 1300 mm Dwedpfsznkqmox Acyed No of Top Units: 1 No of injectors: 1 Positioning of Units by NC: yes

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Dedpozumvxefx Acyowd Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Year of construction: 2025, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use. Dedpfx Ace Afxwbsyjwd

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AH/003306, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 3,200 mm, feed rate X-axis: 40 m/min, TECHNICAL DETAILS Mobile shoulder opening: 3,200 mm Maximum panel width: 3,200 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Dedpfoxx N D Hex Acyewd Edge thickness (coil), minimum PVC-ABS: 0.3 mm Edge thickness (coil), maximum PVC-ABS: 3 mm Feed speed: 10 - 40 m/min Distance between retractable pins: 500 mm EQUIPMENT Motorized pressure rubber belt Support track with retractable pins CNI control unit in a separate control cabinet Rectifier unit with two motors (one for each side) Glue application unit with EVA glue premelter Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapping trimming group Staggered finishing unit with two motors Corner rounding unit with 4 motors Milling unit tiltable 0-90° Edge scraping unit Brushing group