Welding rectifier

OERLIKON GLE 400-6

Condition: new, machine/vehicle number: 1900040028, conveyor belt length: 1,700 mm, conveyor belt width: 440 mm, conveyor belt speed: 57 mm/s, power: 0.18 kW (0.24 HP), input voltage: 230 V, input frequency: 50 Hz, Conveyor belt in front 1,700 x 440 mm Lrodetv E Diepfx Ac Ast FDA compliant

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Ledpfxexbtvfs Ac Aert Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Year of construction: 2000, condition: used, TIG welding machine, DC, 380 volts, for stainless steel. Ljdpfxegt Auue Ac Aert Arkoquad 220, 40% duty cycle at 220 amps, 10% duty cycle at 140 amps, with torch. Ground cable, pressure reducer, water cooling.

Condition: excellent (used), machine/vehicle number: 4220.515, range of control: 20 - 180 A Lrjdpfxjd Hn Ufs Ac Aet welding circuit at 100% ED: 135 A electrical connection: 380 V space needed: 650 x 550 x 850 mm weight: 118 kg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system Lredpey Ulzijfx Ac Ast -Manufacturer: Esab, PULS MIG/MAG welding machine -Type: AristoMig 500W -Max. welding power: 500 A -Features: Water-cooled -Wire feeder case: 4-roller drive Esab type AristoFeed 48-4 -Quantity: 3x Esab, PULS MIG/MAG welding machine available -Price: per piece -Dimensions: 1200/700/H1730 mm -Weight: 210 kg

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Ljdpoxlngasfx Ac Asrt Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Lsdegg Nn Sspfx Ac Aort Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Lrsdpevyyyxsfx Ac Ast Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm Lodsvcrmvjpfx Ac Asrt table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: excellent (used), Steel headstock Center height 650 mm Distance between centers 650 mm Height from base 1190 mm Lrsdpfxogzhbze Ac Aet The total height can optionally be reduced by 100 mm, and the center height can also be reduced by 100 mm, by removing an intermediate plate. Further details, see image.