CNC turning and milling center

Nakamura-Tome NTY3-51

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Max. module with restrictions: MOD 8.0 (DP 3.2) Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Godpjxb Ufusfx Admsil Approx. 60 sets of diamond wheels Grinding stones Turbo separator

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 37 kVA, torque: 236 Nm, controller manufacturer: Heidenhain iTNC530, controller model: iTNC530, table width: 700 mm, table length: 1,700 mm, table load: 700 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,580 h, spindle motor power: 37 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, Heidenhain iTNC530 3-axis CNC machining center Stroke x 1500 mm Stroke Y 700 mm Stroke Z 610 mm Table dimensions: 1700x700mm SK40 tool holder Gijdsvz Tyuspfx Admol Magazine 48 tools Rapid feed 36m/min Table load: 700 kg Spindle center coolant 20 bar Chip conveyor Crank

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m Godsvivx Nopfx Admsil CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: excellent (used), Year of construction: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Z travel: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 kg NC rotary table with direct drive Positioning: 0.001° Max. Max. speed of the rotary indexing table: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 KW (25%) / 28 KW (100%) Giodovgxfyjpfx Admel Spindle torque: 1210 NM / 680 NM Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 places Max. Tool diameter: 325 mm Max. Tool length: 800 mm Max. Tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in the tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 High speed and high accuracy option on Fanuc. Gisdpfxovcfi Ds Admjl The Machine can be inspected under power.

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Gedpjuxfucsfx Admsil Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 8.2 [kW] - C axis indexing precision : 0.001 [°] Gisdpsuha U Hsfx Admel COUNTER-SPINDLE - Max. bar diameter : 25.4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 8.2 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 5000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 8 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 7500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.912 x 1.300 [mm] - Machine height : 1.720 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 44140 [h] - Number of working hours : 28118 [h] - Number of spindle hours : 15281 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11, S51 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank : KNOLL KF 200/1200 * with high-pressure pump - Bar loader : Tornos Robobar SBF 326 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis * Gsdpox Aq E Hsfx Admsil

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Gijdpow D Aynofx Admel

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Gijdpfx Adjwbz Tuemsl