Used Wood Chopper for sale (6,690)

Condition: used, Lathe Holzprofi M910, year 2012, Holzprofi M910, in less good condition, Price changes reserved, errors, typographical and layout mistakes excepted. Csdsx H Uiaepfx Ap Dohd

Condition: used, Year of construction: 2009, Weight 10 kg Year ca. 2009 x Cjdjx U A Nqopfx Ap Dshd

Condition: used, -12 loading mouths/openings -4 decks -Integrated loader elevator -Operates on wood and gas Chsdpfxjx Up Nwo Ap Ded -Sold with gas burner -With mechanical control -Voltage: 400V

Condition: excellent (used), functionality: fully functional, feed hopper 169x123 cm hydraulic pressure drawer Chedpfx Apey Sgd To Ded control from control panel motor power 15 kW shaft width 600 mm

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Cjdpjy Uydlofx Ap Dohd

Condition: new, Year of construction: 2026, Untha Shredding Solution LR700 Technical Data - Cutting unit opening: 700 x 1,065 mm Chedpfx Aezykvtop Djd - Drive description: Belt drive with 2-stage gearbox and elastomer damper - Drive power: 18.5 kW - Hydraulic power: 1.1 kW - Rotor speed: 98 rpm - Voltage / Frequency: 400 V / 50 Hz - Energy efficiency class: IE 3 - Rotor cutting system - Design: Smooth - Rotor diameter: 300 mm - Number of knife rows: 1 piece - Number of cutting tools: 19 pieces - Dimensions L x W x H: ≤ 500 x 200 x 100 mm - Prohibited feed materials: ≥ 150 nails and ≥ 6 screws - Chip discharge: on-site extraction system - Extraction nozzle Ø: 200 mm - Control: Siemens SIMATIC S7-1200 / CPU1214 The warranty period for the shredding machine is 3 years or 2,000 operating hours (whichever is reached first). Figures 5-7 show a demonstration machine for viewing purposes!!!!!

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Chedpfx Ajxc Rmqep Ded Location: Flörsheim

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 Cedpfx Aogfwfwep Djhd -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : Chodpfxef H Hlro Ap Ded F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: used, Wood band saw, band saw machine, band saw, vertical band saw Csdpokia T Uefx Ap Djhd -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.770 mm -Cutting height: max.400 mm -Saw band: length 5330 mm -Work table: pivoting -Dimensions: 1470/935/H2390 mm -Total weight: 743 kg

Condition: used, Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Wood Screws: Hex Head Wood Screws -Quality: DIN 571 galvanized steel -Sizes/number: M10 x 40 2080 pcs / M8 x 60 800 pcs -Manufacturer: Reyher/Diverse -Price: complete Csdsi E Agrspfx Ap Dohd -Total weight: approx. 80 kg

Condition: new, Year of construction: 2025, overall weight: 131 kg, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS20288 log splitter from HZC Power offers an impressive splitting force of 20 tons and is ideal for splitting logs up to 600 mm long. Equipped with a robust 6.5 HP (208 cc) gasoline engine and a fast splitting cycle of 14 seconds, it enables efficient wood processing. The splitter operates horizontally and features two-hand operation for maximum safety. A trailer hitch allows for easy transport on private property. Furthermore, the integrated frame ensures secure support of the logs, making it suitable for both professional and home use. General Specifications: Manufacturer: HZC Power Model: HS20288 Splitting Force: 20 t Maximum Splitting Length: 600 mm Splitting Cycle: 14 s Hydraulic Oil Capacity: 10 l (HLP46) Product Weight: 131 kg Shipping Weight: 150 kg Special Features: Trailer Hitch: For easy transport on private land Splitting Wedge/Cross Bar: Permanently mounted for effective splitting Working Position: Horizontal, ideal for working at low heights Two-Hand Operation: Increases safety by keeping both hands out of the splitting area Hydraulic System: High oil pressure of 270 bar for powerful splitting Oil Filter: Extends the service life of the hydraulic system Integrated Frame: Ensures secure hold of the split material Engine: Manufacturer: Jiao Model: Gasoline engine 6.5 HP Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV Displacement: 208 cc Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (W x L x H): 321 x 376 x 346 mm Performance features: Splitting force: 20 tons for powerful wood splitting Splitting length: Up to 600 mm for various log sizes Splitting cycle: Fast 14-second cycle for high working speed Two-hand operation: Increases safety by keeping both hands out of the splitting area at all times Hydraulic system: High oil pressure of 270 bar for powerful wood splitting Hydraulic oil: 10 l HLP46 for stable operation Oil filter: For a longer service life of the hydraulic system Csdpswal Akjfx Ap Dohd Trailer hitch: Allows easy transport on private land Off-road Frame construction: Integrated frame for secure support of the logs Fuel tank: 3.1 l for extended operating times Oil capacity: 0.6 l for the engine (10W40 or 15W40) Pre-assembled: Ready to use quickly The HS20288 log splitter comes with a well-thought-out package that allows for a quick start: Pre-assembled: The log splitter is already partially assembled and ready to use. Jiao gasoline engine (6.5 HP): Powerful 208cc engine, integrated and ready to use. Trailer hitch: Facilitates transport on private property. Hydraulic oil (HLP46): Already partially filled, so the splitter is ready to use immediately. Two-hand operation: For safe operation, both hands must remain outside the splitting area. Splitting wedge/crosspiece: Permanently mounted for effective splitting. Transport packaging: Robustly packaged to ensure safe arrival. Our customer service is available at any time to answer any questions you may have about the scope of delivery or commissioning!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VECOPLAN 55/18/3 Mill Inlet width: 550 mm Inlet height: 180 mm Csdpfx Apowiuywe Dshd Main motor: 55 kW Number of lower drive axles: 2 Bottom drive motor: 3 kW Number of upper drive axles: 1 Upper drive motor: 3 kW Pneumatic guard opening Electrical panel Ready for operation Year of manufacture: 2000

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GHZ 600 Factory overhauled, V-rotor Feed width: 300 mm Maximum feed height: 70 mm Working width of rotor: 300 mm Rotor diameter: 252 mm Rotor speed: 600 rpm Cutting system: 14 knives, 40 x 40 mm Screen perforation: 25 mm Control cabinet: fully wired, incl. 5 m cable Motor output: 18.5 kW Electrical connection: 400 V +/- 5% / 50 Hz Extraction port Ø: 200 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Chjdpfeymb Ubex Ap Dod Includes: • PLC electrical control (Moeller / Siemens); star-delta starting • Load-dependent material feed via top-mounted feed roller • Machine frame on anti-vibration rubber mounts • Patented V-rotor with milled knife pockets in the profile • Welded knife carriers and bolted knives with recessed knife screws • Machine prepped for on-site extraction system (extraction port Ø 200 mm)

Condition: new, Year of construction: 2026, travel -z axis 1200 mm travel -x axis 360 mm Weight 3250 kg NESTO 4 Axis Pro Cnc Wood Lathe Machine TECHNICAL SPECIFICATIONS - Work Piece Dimension Max Diameter 360 mm - Max length 1200 mm - Control Unit TPA Control Unit (ltalian) - Z Axis Movement 1200 mm - X Axis Movement 360 mm - Long Axis Speed (Z) 70 m/min - Short Axis Speed (X) 30 m/min - Vertical Axis Speed (Y)20 m/min - Lathe RPM 4500 rpm (Direct Drive) - lnstalled Power 20 KW - Lubrication Unit ILC Automatie Lubrication - Piece Clamping Pneumatic Piston (7 Bar) - Piece Length AdjustmentEasy adjustment with remote control (keyless, boltless) - Cutting Blade Hardened Triangle Blade Made of Special Steel - Cutting Blade Hardened Rounded Blade Made Of Special Steel - Cutting Blade Debarker Blade - Spindle Motor ATC (Automatie tool changer) 24000rpm spindle (5 Pcs tool changer) - Drawing Program ltalian Cad-Cam Program Special for Our Machine (Pegasus 4 Axis Cad & Cam Program) - Machine Dimension Length: 3870mm * Width:2450mm * Highest: 2150mm - Weight 3250 kg GENERAL SPECIFICATION High-resolution Panasonic Japanese servo motors are used in our machine. The axis that rotates the part has the "Direct Drive" function and can work with a 5 kW servo motor at 4500 rpm. Precision ball screws and nuts are used in all axes. Workpiece length setting can be adjusted with a single knob. This ensures time savings and long-term linearity of the tailstocks. The control unit has a remote control function. In addition, with functions such as job sequencing, detailed reports and display of the three- dimensional state of the workpiece, the TPA control offers the user great convenience. Structure Of Chassis With its reinforced, vibration-free and stable chassis design, it provides accuracy over long production cycles and remains reliable for your machining needs. lt has an impressive frame design that provides reliable precision in operation. Ax1s Movements All axes are driven by servo motors. They allow precise acceleration at high speed. High quality and high precision rails, carriages and racks are used to prevent the movement of the axes from being affected by the slightest vibrations. Chedpfx Asyk Ia Ssp Ded Central Automatie Lubrieation Unit Automatie Tool Measurement Unit lt is a unit that makes an automatic measurement to measure the length of the cutter located at the end of the spindle motor and milling in the Z axis with the correct dimensions, and can store this information through the control unit. lt offers a convenience that eliminates the need for the user to enter measurements during the change of cutter. Tpa Control Unit (ltalian) TPA control unit has Windows based industrial computer. lndustrial computers enable trouble-free operation in the most demanding conditions. Main features of TPA Controller: lt has Ethercat communication system. -Detailed reporting is available. -lt provides ease of use thanks to its specially designed interface. Thanks to its built-in wireless feature, it allows remote access by connecting to the internet. In this way, you can receive your after­sales support needs instantly from our after Sales Team. CAD/CAM SOFTWARE/ PEGASUS CAD & CAM Cad/Cam Software/ Pegasus Cad & Cam lt is a specially designed Cad Cam program to be used in our machine. Pegasus Cad Cam Drawing program is a versatile software that can be used by designers and engineers to create, modify and analyze 3D models. This softwa...

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call. Codpjy Hi D Ssfx Ap Dshd

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chjdpfx Apsy D I I Re Ded Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: good (used), Semi-automatic wood lathe Maximum working length 1200 mm Maximum working diameter 180 mm Chjdpfx Apstttp Ro Ded

Condition: used, main engine 75 Kw, lower and upper gear drive 4 Kw each, entrance 420x420 mm, 2 blades 50 mm each Chodpfx Apotpizpe Dsd

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure Chsdsyw Ndmepfx Ap Dsd System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, We offer for sale a modern PRINZ ECOSTAR chain package cross-cut saw, designed for efficient and precise cutting of timber packages and large wooden elements. This is a high-quality Austrian machine (year 2025) suitable for industrial use both indoors and outdoors. Key Features & Benefits Manufacturer: PRINZ GmbH (Austria) Model: ECOSTAR Year of manufacture: 04 / 2025 Designed for cutting timber packages and solid wood Robust and mobile design Suitable for indoor and outdoor applications High precision and reliable performance Electrical System Operating voltage: 400 V (3-phase) Frequency: 50 Hz Connected load: approx. 7.5 kW Fuse protection: 32 A Protection class: IP55 Drive & Performance Main motor power: approx. 7.5 kW Speed: approx. 1,400 – 2,900 rpm (depending on configuration) Rated motor current: approx. 13.6 A Cutting System Chain saw cutting unit (bar-type system) Guide bar length: 2,500 mm Integrated lubrication system with oil tank Automatic oil pump lubrication General Data Machine weight: approx. 170 – 180 kg Noise level: approx. Chedpfx Apjzgtt Io Djd Idle: ~94 dB Operation: ~95–96 dB Operating Conditions Ambient temperature: +5 °C to +35 °C Suitable surface: firm, level, dry ground Designed for mobile use (rubberized chassis/wheels) Condition & Equipment Condition: Very good / almost new Modern machine (2025) Fully functional and ready for operation Applications Cutting of timber packages Cross-cutting of beams and logs Wood industry, sawmills, timber yards Advantages Mobile and flexible use High cutting accuracy Robust industrial design Easy operation and maintenance Reliable Austrian manufacturing quality

Condition: used, Year of construction: 2006, REINBOLD CRUSHER, AZR 800, 22 kW Chedpozmiaqofx Ap Djd Rotor, D.252 40 round blades.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Chsdpfxozkg Sfs Ap Dsd Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Condition: excellent (used), Year of construction: 2007, operating hours: 11,000 h, functionality: fully functional, fuel type: electric, fuel: electricity, Jenz AZ660 electric model in perfect condition. Manufactured in 2007 and with 11,000 operating hours. 200 kW power output. Cedozwv R Repfx Ap Djhd

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, OILING LINE FOR SOLID WOOD PANELS Csdpfx Apsz D E Ics Djhd