Used Wood Chopper for sale (16,204)

Condition: good (used), Wood milling inserts, knife inserts, form milling inserts -Blade width: 40 mm -Blade thickness: 2 mm Gsdpfx Aob A Sugsdmoil -Price: complete -Weight: 0.3kg

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Godpfx Adex Twd Temeil Storage location: Supplier

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. Giedpfx Aex Tp U Rjdmol GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition - available immediately

Condition: used, machine/vehicle number: XLER6X2000512xxxx, mileage: 1,405,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gsdpswqwlrsfx Admoil Gearbox: Automatic

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm Giedpoh Eiw Isfx Admol hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg Giodpjvx Hkzofx Admel • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: excellent (used), mileage: 700,636 km, first registration: 10/1987, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 9,400 mm, total width: 2,500 mm, total height: 3,960 mm, Year of construction: 1987, Equipment: crane, = Additional options and accessories = Gijdpfsxw Ia Rjx Admel - PTO (Power Take-Off) = Further information = Technical details Number of cylinders: 6 gross vehicle weight: 26,460 kg Axle configuration Suspension: Leaf suspension Front axle: Steered Rear axle 1: Twin tires; Reduction: Outer planetary axles Rear axle 2: Twin tires; Reduction: Outer planetary axles Condition Technical condition: Very good Optical condition: Very good Financial information Price: On request Further information For more information, please contact Thierry Leemans.

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Giedpfx Asx Twdmodmel

Year of construction: 2009, condition: ready for operation (used), Additional Equipment Second-hand shrink-foil packaging line Through-feed fully automatic shrink foil packing line: loading belt /wrapping station for 3 foil rollers /shrinking tunnel /outfeeding conveyor This ERREGI LINE ERREGI was manufactured in 2009. It features a fully automatic shrink-foil packaging line, including a loading belt, wrapping station for three foil rollers, shrinking tunnel, and an outfeeding conveyor. Consider the opportunity to buy this ERREGI LINE ERREGI woodworking machine. Contact us for more information. Gedsx R E Sgspfx Admoil Application Types Other Woodworking Machinery

Condition: used, mileage: 831,685 km, power: 199 kW (270.56 HP), first registration: 04/2007, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro4, suspension: steel, total length: 9,730 mm, total width: 2,550 mm, total height: 3,890 mm, loading space length: 7,410 mm, loading space width: 2,470 mm, loading space height: 2,660 mm, Year of construction: 2007, Equipment: ABS, electric window regulation, tail-lift, traction control, = Additional Options and Equipment = - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Twin tires, Gross weight: 19,000 kg, Total tank capacity: 300 liters, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cab type: Short cab, Tachograph (control device), Digital tachograph, Electric windows, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamps, Speed limiter, Air conditioning, Seat heating, Engine power: 199 kW (267 hp), Fuel: Diesel, Euro: 4, Transmission type: Opti-cruise, Gearbox brand: Scania, Speed limiter, Gears: 8, Clutch pedal, Power steering, ABS, ASR, Starter battery, Body year: 8, System type: ., Seating configuration: 1+1, Seat upholstery: Fabric, Manual seat adjustment, Tail lift, Tail lift variant: Rear gate, Tail lift capacity: 2,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift size: 175 x 252 = More Information = Transmission Transmission: SCA, 8-speed, automatic Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Axle 1: Tire size: 315/80R22.5; Left tire tread: 2 mm; Right tire tread: 3 mm Axle 2: Tire size: 315/70R22.5; Twin tires; Left inner tread: 6 mm; Left outer tread: 5 mm; Right inner tread: 4 mm; Right outer tread: 5 mm Weights GVW: 19,000 kg Functional Tail lift: Dhollandia, rear gate, 2,000 kg Loading platform height: 114 cm Condition General condition: Average Technical condition: Average Gijdpfjww At Uex Admjl Optical condition: Average Damages: None Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Fair business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Expert technical services • The security of 'recognizable quality' • And much more.... Visit our website for special offers and the full stock: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send a request via our website. Ask directly for our European warranty package.

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile Gisdpfx Adoh Hnp Djmsl - gear limit switch - Contact pressure

Year of construction: 2009, condition: reconditioned (used), Complete plant for the production of wood wool/wood shavings out of logs with a lngth up to 3,0 m. Total capacity about 4 to/h. Complete control system including knife grinding machine, several planer heads, conveyor system for wool transport. Exhausting system. very good condition. Gjdpfx Asiiia Rjdmoil

Condition: ready for operation (used), -packet-jointing line -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW Giodpfxobqqzgo Admsl -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Giedpfx Asx Twcpsdmol

Condition: new, total length: 2,500 mm, total width: 625 mm, total height: 22 mm, We offer OSB boards as grade II (second choice) in this listing. (Sales are package-only. Single boards cannot be purchased.) Scope of delivery: - OSB boards, grade II - Total length: 2,500 mm - Total width: 625 mm - Thickness: 22 mm - Board size in m²: approx. 1.56 m² - Total m² per package: approx. 50 m² - Version: Tongue and groove - Quantity per package: 32 pieces - Base price per m²: €9.24 Gedpfxsxxrv Es Admsil Note: This is a special lot of grade II boards, which may contain damaged OSB panels. Your contacts at our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will apply, which can be requested individually based on the delivery location and quantity.

Condition: used, mileage: 813,285 km, power: 199 kW (270.56 HP), first registration: 04/2007, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,730 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel, total length: 9,900 mm, total width: 2,550 mm, total height: 3,950 mm, loading space length: 7,400 mm, loading space width: 2,450 mm, loading space height: 2,640 mm, Year of construction: 2007, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Gross vehicle weight: 19,000 kg, Total fuel tank capacity: 300 liters, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: Red, Heated mirrors, Lighting type: Halogen lamp, Speed limiter, Climate control, Engine power: 199 kW (267 Hp), Fuel: Diesel, Euro standard: 4, Transmission type: Opticruise, Gearbox: Scania, Speed limiter, Gears: 12, Clutch pedal, Power steering, ABS, ASR, Starter battery, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift type: Rear flap, Tail lift capacity: 2000 kg, Tail lift manufacturer: DHOLLANDIA DHLSU11, Tail lift material: Steel, Tail lift size: 175 x 252, Spare wheel, Spare wheel tread: 6 % = Further Information = Transmission Transmission: SCA, 12 gears, automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Drum brakes Suspension: Leaf suspension Giedpoww T Hlefx Admsl Axle 1: Tire tread left: 5 mm; Tire tread right: 1 mm Axle 2: Twin tires; Inner left tread: 1 mm; Outer left tread: 5 mm; Inner right tread: 1 mm; Outer right tread: 5 mm Weights gvw: 19,000 kg Functional Tail lift: DHOLLANDIA DHLSU11, rear flap, 2000 kg Loading platform height: 113 cm Condition General condition: average Technical condition: average Visual condition: average Damages: none Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, production years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good prices • Honest business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) plates arranged quickly • Expert technical services • Security of 'recognizable quality' • And more… Please visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 Gijdpfx Adspdqzxomsl height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), functionality: fully functional, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: function-tested, very good, used - Workpiece thickness: 16 to 55 mm - Minimum workpiece width: 30 mm - Minimum inner radius: 35 mm - Maximum edge thickness: 3 mm - 2 milling motors 0.4 kW - Extraction connection 80 mm Gsdsx Rrbzepfx Admoil

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 125 mm -Height: 40 mm -Hole: Ø 30 mm Gijdpfx Ajb D I Awedmol -Quantity: 1 milling cutter -Price: complete -Weight: 2.2 kg

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 18 mm, We offer OSB boards here as Grade II (seconds). (The boards are only sold by the package. Individual boards cannot be purchased.) Scope of delivery: - OSB boards, Grade II - Total length: 2,440 mm - Total width: 590 mm - Thickness: 18 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 144 m² - Design: Tongue and groove - Quantity per package: 100 pieces - Base price per m²: €7.56 Notes: This is a special lot in Grade II, damage to the OSB boards may be present. Your contacts at our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information on the item: Gijdpjxxrn Uefx Admsl This item is only available for collection. Delivery or shipping is subject to additional costs, which can be provided upon request depending on the location and volume of delivery.

Condition: used, axle configuration: 3 axles, first registration: 10/2013, loading space length: 13,500 mm, loading space width: 2,490 mm, loading space height: 2,620 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,800 mm, color: other, Year of construction: 2013, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 31,180 kg, Unladen weight: 7,820 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body build year: 2013, Axle type: BPW, Tail lift, Tail lift design: fold-under tail lift, Tail lift capacity: 2,000 kg, Tail lift material: steel and aluminium, Tail lift dimensions: 165x240, Battery for ramp, 2,000 KG TAILLIFT = Further information = General information Cab: Day cab Registration number: ON-89-BT Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 12 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 4 mm Axle 3: Tyre tread left: 4 mm; Tyre tread right: 6 mm Weights Unladen weight: 7,820 kg Payload: 31,180 kg gross vehicle weight (GVW): 39,000 kg Gedox H I Amjpfx Admjil Functional Tail lift: under-run flap, 2,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Verified quality • Competitive price • Professional business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates quickly arranged • Professional technical services • The assurance of "recognizable quality" • And more…. Please visit our website for special offers and to view our complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: new, total length: 2,440 mm, total width: 590 mm, total height: 12 mm, We offer you OSB boards as Grade II selection. Giedpsxxrhnefx Admol (The boards are only sold in packages. Individual boards cannot be purchased.) Scope of delivery includes: - OSB boards, Grade II - Article number: OSB10 - Total length: 2,440 mm - Total width: 590 mm - Thickness: 12 mm - Board size in m²: approx. 1.44 m² - Total m² per package: approx. 216 m² - Design: with tongue and groove - Quantity per package: 150 pieces - Base price per m²: €5.04 Note: This is a special lot of Grade II boards; the OSB boards may show damages. Your contacts in our company: Mr. Falk Deutsch Mr. Mario Klöver Mr. Andre Evering General information about this item: This item is available for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us individually depending on the place of delivery and the required quantity.

Condition: good (used), The scope of delivery includes: 01x wooden beam, used Giedpfx Aevu Rq Dedmel Wood type: spruce / fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | piece: approx. 25.67 kg The price stated corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for pick-up. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 02x shelf stand, used Material color: sendzimir galvanized upright profile: 85 x 75 x 2,00 mm upright height: 1.455 / 1.300 mm upright depth: 1.100 mm 04x shelf traverse, used material color: orange box profile: 120 x 50 mm clear width: 2.700 mm Giedpfx Adsdvgxiomol 08x safety pins, used execution: completely galvanized 03x wire grating, new material color: sendzimir galvanized Execution: mounted shelf gratings, canted on both sides depth: (bearing bar direction) approx. 1.125 mm for upright depth: approx. 1.100 mm clear width: approx. 965 mm width: approx. 885 mm crossbar support: approx. 65 mm mesh width: approx. 95 x 45 mm material thickness wire: approx. 4,5 mm maximum loadable up to 800 kg with evenly distributed load 03x Trapezoidal sheet, II. choice Color outside: RAL 8012 red brown Color inside: similar to gray-white Sheet length: 1.500 mm Panel width: 1.075 mm Cover width: 1.035 mm Profile: 35 / 207 01x verge angle, new length: 3.000 mm Material color: RAL 8012 red brown size: 100 x 100 mm thickness: 0,75 mm Finish: 90° folded 25x screws 5,5 x 40 mm A2 max. drilling capacity: 13 mm with 16 mm sealing washer, drill point u. Approval ETA-13/0183 06x screws, 4,8 x 20 mm galvanized, self-tapping for wooden substructure Technical data of the firewood shelter: Total width: approx. 2.900 mm total depth: approx. 1.515 mm total height: approx. 1.535 mm volume to be stored: approx. 3,15 m³ Information: The pictures are sample pictures for clarification of the construction. to illustrate the construction. The material color of the stands and trusses shown may differ. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x chipboard, used dimensions: approx. 2.630 x 590 mm (WxD) Chipboard thickness: 22 mm Remark: if necessary in two parts Remark: The chipboards are used and may show slight damages! General information about the item: This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading) Gsdpfx Adsh A Hzpemjil