Used Wood Bending Machine for sale (86,642)

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation Ltsdpfx Ajxu Dxqsa Eoa -Four continuously adjustable counterholder bars without accessories! *

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Ltjdpfxewyda Ue Aa Eja Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Ltjdpoga T Dlofx Aa Esa Max. bending capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 430 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-90 A Technical Specifications Max. Tube Diameter (mild steel): 90 mm Max. Tube Wall Thickness (mm): 4 Max. Bending Angle (°): 190 Tube Bending Rate (d/min): 3-6 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Loading Length (mm): 3000 Bending Motor Power (kW): 15 Hydraulic Motor Power (kW): 5.5 Machine Width (mm): 1400 Machine Length (mm): 4500 Ltjdpfjxvzurex Aa Esa Machine Height (mm): 1600 Machine Weight (kg): 3000 Features • On our standard NC machines, the distance and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend more quickly and accurately by monitoring the progress and rotational positions of the bends carried out with our machines equipped with the NC Car System.

Condition: new, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers Ledpsg Sr I Uofx Aa Esta - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: used, Brand:CASANOVA Model: PCV 35- 3 RODILLOS Descritción • Capacity 3050 x 20 mm • Voltage 400v/50h Lodpfx Aovx A Amoa Eota • Weight 15000 kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2002, Mandrel bending machine for pipes up to 65 mm diameter Ltsdpfxjx Dgwzj Aa Eea

Condition: excellent (used), functionality: fully functional, CAMAM GC6/6F-2L Carousel Milling Machine Number of milling units: 6 Number of sanding units: 2 Number of loading stations: 6 Ljdpfsx Azu Eex Aa Eeta Max material length: 1200 mm Max material width: 250 mm Max material height: 150 mm Feed speed: 17 m/min Capacity: up to 1800 pcs per hour Ideal for front and rear chair legs, bed components, and curved furniture elements

Condition: new, upper and lower blade removable in segments PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 43 mm Ledpfx Aoga T A Sea Eota Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 450 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Ltsdpfx Aaoxvzt Us Eja Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: new, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2070 x 4 - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamp) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamp) - Continuously adjustable speed - Hardened rollers - Tapered rollers - Removable top roller - Brake motor - Emergency stop - Documentation Ltodpfehvr Nljx Aa Eoa - 400V

Year of construction: 2010, condition: ready for operation (used), This PROMAU MCA 2017 roll bending machine was manufactured in 2010. It features a plate width of 2050 mm, rolling thickness up to 6 mm, and pre-bending thickness of 5 mm. Equipped with a centralized control console, hydraulic drive on side rolls, and a full safety system, it ensures precision and safety. Consider the opportunity to buy this PROMAU MCA 2017 roll bending machine. Contact us for more information. Ledpfjx D R Rxox Aa Esta Application Types Bending

Condition: new, Year of construction: 2023, shaft diameter: 80 mm, Profile bending machine AHB 80 - electro-hydraulic ring/profile bending machine - hydraulic bottom roller adjustment - Hydraulic side roller adjustment - Lower shafts individually adjustable - Three driven rollers - divided roller segments - digital display - touch screen - Hardened shafts and standard rollers - Hydraulically adjustable side straighteners - Can be used horizontally and vertically - Mobile control panel - CE mark / declaration of conformity Shaft diameter 80 mm hardened Fully hydraulic Lsdpoqxcy Hsfx Aa Eeta Motor 400 Volt 50 Hz 3 ph. Weight approx. 1,700 kg Dimensions 1340 x 1390 x 1640 mm

Year of construction: 2018, condition: ready for operation (used), A hydraulic long folding machine/swivel bending machine Sperr & Lechner is available. Working width: 8000mm, max. sheet thickness steel/aluminium/stainless steel: 3mm/4mm/2mm, max. bending angle: 145°, throat depth: 1130mm, opening width: 180mm, back gauge: 1000mm. Machine dimensions X/Y/Z: approx. 10000mm/2100mm/2100mm, weight: approx. 7500kg. Documentation available. An inspection on site is possible. Ltsdjxxa Tlepfx Aa Eja

Condition: used, Glaser flat steel bender HAWE HC4L/3,0 Hydraulic see pictures Ltsdpfeu Da Afex Aa Esa

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Technical Specifications Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Ledpfxsxvzr Rj Aa Eeta Features • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending.

Condition: new, roller diameter: 95 mm, - Capacity 2070 x 1.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop Lsdpfxsvkkkij Aa Esta - Documentation - 400V

Condition: new, Year of construction: 2025, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery -30% OFF PROMOTIONAL machines in prompt delivery Ltjdpfoh U A Uaox Aa Eoa CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 Lodpfjd A Nb Hjx Aa Esta - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Year of construction: 1989, condition: ready for operation (used), An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible. Ltjdpfsxxa U Nox Aa Esa

Condition: new, Year of construction: 2024, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning Loder H Df Iepfx Aa Ejta - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: new, Year of construction: 2025, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) 100% made in ITALY CV models are equipped with an additional fan for smoke expulsion at the base of the flue Ltodpfx Aof H Hlroa Eea model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: new, roller diameter: 95 mm, working width: 1,070 mm, - Capacity 1070 x 3 mm - Conical rollers - Pivoting top roller - Foot pedal control - Brake motor Ltjdpfjwhgm Tex Aa Esa - Emergency stop - Documentation - 400V

Condition: new, roller diameter: 140 mm, – Capacity 1270 x 4.5 m – Electrically adjustable rear roller – Digital display for rear roller movement – Hardened rollers – Conical rollers – Pivoting top roller – Brake motor – Emergency stop – Documentation – 400 V Lodewbug Uepfx Aa Eota

Condition: new, Year of construction: 2025, - Capacity 1050 x 3 mm Lodpfx Asq H D S Roa Eota - Roll diameter 90 mm - Conical roller - Swivel top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V